Used Work Bench for sale (52,246)

Condition: new, Year of construction: 2024, Dingli JCPT1212AC 12m Electric Scissor Lift, Not All-Terrain, 14 Units Available • Automatic anti-tip system in the chassis • Anti-crush protection • High ground clearance • Self-locking platform door • Speed limitation at maximum height • Electric steering system • Drivable at maximum height • Platform overload protection • Automatic braking system • Non-marking tires • Tilt indicator with alarm • Audible lowering signal and dual LED strobe light • Safety bar for maintenance • Horn • Cylinder lock valve • Emergency stop button • Emergency lowering system • Drive motor protection • Tie-down points Iodpfx Aoxl Nw Hohystb • On-board diagnostics system • Hour meter • Proportional controls • Foldable guardrails • Power supply on the platform • Maintenance-free battery • Motion alarm • Integrated forklift pockets for transport • Charging protection system • Charge level indicator • Lifting and anchoring points • One-sided platform extension • 2 drive wheels • 2 steering wheels • Manual emergency brake release Capacity: 408 kg Maximum number of occupants: 2 Working height: 12 m Platform height: 10 m Overall length: 2.48 m Overall width: 1.15 m Overall height (rails up): 2.49 m Transport height (rails down): 1.96 m Platform length: 2.27 m Platform width: 1.12 m Platform extension: 0.90 m Ground clearance (stowed): 10 cm Ground clearance (raised): 1.9 cm Wheelbase: 1,870 mm Turning radius (outside): 2.10 m Drive motors: 2x 15VAC / 0.87 kW Travel speed (stowed): 6 km/h Travel speed (raised): 0.80 km/h Integrated charger: 24V/30A Gradeability: 25% Maximum working slope: 1.5°/3° Non-marking tires: 381×127 mm Subject to errors and prior sale. Internal vehicle number: R83 WhatsApp support available! If you have questions about the machine or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, * Air suspension Iedpfxjwtaz Ij Ahystb * SAF axles * Stanchions * Twist-locks for containers * Unladen weight: 8,390 kg -----Internal vehicle number: 11009----Errors & prior sale excepted. WhatsApp support available! If you have questions about the vehicle or need further information, please feel free to contact us via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 3,326 h, load capacity: 227 kg, lifting height: 13,700 mm, fuel type: diesel, color: red,

Condition: used, mileage: 108,332 km, power: 112 kW (152.28 HP), first registration: 12/2000, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, emission class: euro1, Year of construction: 2000, Equipment: ABS, M-Benz Atego 815 with Ruthmann aerial work platform TYPE: TK 220 FIN: K517249 Chassis / attachments: * Wheelbase: 3,620 mm * Leaf springs * Tires: 215/75 R 17.5 * Remaining profile: V.~50% H.~90% * 1 x diesel tank Cabin: * Manual roof hatch * Viewing window in rear wall of cabin * Radio cassette * Storage above engine tunnel Structure: * Ruthmann Steiger TYPE: TK220 * 4-point support * Working height max. 22.5m * 4-way telescopic lifting arm (synchronous) * Protective grille above cabin * 2 x rotating beacons Engine / transmission: * 4,249 cc // 152 HP / 112 KW // EURO 1 * 5-speed manual transmission * Differential lock Weights: * Total weight: 7,490kg * Empty weight: 7,490kg Other: * German vehicle * New MOT available on request * new exhaust turbocharger at 108,178 km / on June 27th, 2023 New general inspections / safety checks or weight reductions / increases are available on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within the Federal Republic. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Itjdpfxet Rckwo Ahysb Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our company philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: used, mileage: 108,332 km, power: 112 kW (152.28 HP), first registration: 12/2000, fuel type: diesel, overall weight: 7,490 kg, color: red, gearing type: mechanical, emission class: euro1, number of seats: 2, Year of construction: 2000, Equipment: ABS, M-Benz Atego 815 with Ruthmann aerial work platform TYPE: TK 220 FIN: K517249 Chassis / attachments: * Wheelbase: 3,620 mm * Leaf springs * Tires: 215/75 R 17.5 * Remaining profile: V.~50% H.~90% * 1 x diesel tank Cabin: * Manual roof hatch * Viewing window in rear wall of cabin * Radio cassette * Storage above engine tunnel Structure: * Ruthmann Steiger TYPE: TK220 * 4-point support * Working height max. 22.5m * 4-way telescopic lifting arm (synchronous) * Protective grille above cabin * 2 x rotating beacons Engine / transmission: * 4,249 cc // 152 HP / 112 KW // EURO 1 * 5-speed manual transmission * Differential lock Itsdpst Rck Refx Ahyjb Weights: * Total weight: 7,490kg * Empty weight: 7,490kg Other: * German vehicle * New MOT available on request * new exhaust turbocharger at 108,178 km / on June 27th, 2023 New general inspections / safety checks or weight reductions / increases are available on request. We are happy to help you obtain export / transfer license plates, and it is also possible to transfer your purchased vehicles within the Federal Republic. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and selling commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Commercial Vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our company philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Completing customs formalities We are happy to help you with customs matters.

Condition: good (used), Year of construction: 2019, mileage: 167,000 km, Renault Master 2.3DCI K32 aerial work platform van, 13m working height, 2019 Video available via Whatsapp. Ongoing stock, see website. Prices ex Nuland. Iedpsx Upn Hjfx Ahyetb Van de Wert Trading B.V. maintains a variable stock of machines, trucks, trailers, and attachments. All deliveries are at trade prices, AS-IS, without warranties (see our general terms and conditions). For a viewing and/or test drive, you can make a non-binding appointment. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), approx. 4 - 5 pieces work tables, height adjustable - used - : Price ex location: 400.-€ (net), disassembled, packed and loaded! Manufacturer: Herbert Grüttner type: Modulus Iodpski Tv Eofx Ahystb Year of manufacture: unknown, height adjustable - with motor Type 1 - 1 piece: table top with semicircular cutout width: ca. 1,60m width back side: ca. 1,30m height back side: ca. 1,28m total height back: 1,90m total height incl. lamp: ca. 2,10m Depth: narrow side of the worktop: ca. 95cm total depth of the table at the narrow side: ca. 1,05m Type 2 - 2 pieces: table top approx. W: 2m x 1m total height approx. 2,20m Type 3 - 1 piece: table top approx. W: 1,60m x 0,75m total height approx. 2,20m Type 4 - 1 piece: Table top approx. 0,90mm x 1,30m Condition: good Available: from end of Oct./Nov. 2021 Location: Warehouse Frankenberg (Saxony)

Condition: used, Technical details: bore capacity in steel (diameter): 16 mm throat: 190 mm bore stroke: 60 mm Distance spindle/table max.: 250 mm range of revolution per miute: 410 / 725 / 1100 / 1700 bei 4step U/min Isdou Id Dzspfx Ahyjtb spindle taper MT: MK 2 table surface area: 155 x 155 mm vertical adjustment: Tisch/table = 180 mm table rotating: 360 ° base plate surface area: 175 x 175 mm distance spindle center to floor plate:: max. 360 mm column diameter: 70 mm machine weight ab.: 65 kg dimensions L x W x H: 0,6 x 0,3 x 0,85 m Drill sleeve equipped with drill chuck 1 - 16 mm table rotatable *

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 20 mm throat: 220 mm bore stroke: 85 mm Distance spindle/table max.: max. 260 mm range of revolution per miute: Keilriemen U/min spindle taper MT: 2 table surface area: 220 x 280 mm base plate surface area: 225 x 280 mm distance spindle center to floor plate:: max. 380 mm total power requirement: 0,33 kW Itodeu Id D Uopfx Ahyjb machine weight ab.: 125 kg dimensions L x W x H: 0,8 x 0,4 x 0,8 m The machine is currently in the technical department. Table rotatable 380 V with connection cable 2500mm *

Condition: used, Technical details: material thickness: 1,0 mm Ijdpfx Ahou N E Evoystb material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. Itjdpfx Ahjvc Ayteysb i.D. *

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,977 h, load capacity: 227 kg, fuel type: diesel, Equipment: all wheel drive, Note: Basket has severe rust marks Itedpfxex U Rwcs Ahyob

Condition: new, maximum load weight: 33,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment features. Full equipment details available upon request. Frame: * Standard ladder-type frame in lightweight steel construction with through-bolted crossmembers * With pre-cambered chassis frame * Coupling plate approx. 8 mm thick, fitted with a 2-inch fifth wheel king pin according to DIN 74080 / ISO 337 Chassis: * An increase in the total gross train weight is permitted for indivisible loads * Axle lift mechanism on axle 1, lift control fully automatic, load-dependent * Make of your choice, Kögel recommended * Tri-axle assembly with disc brakes Ø approx. 430 mm, offset approx. 120 mm * Air suspension with approx. 180 mm travel Vehicle Tyres: * Wheels with built-in sensors compliant with UN ECE R141 * Sixfold 385/65 R 22.5 UNIROYAL TH 506 tyres on 22.5 x 11.75 steel rims, offset approx. 120 mm (ET 120) Chassis Attachments: * Landing gear (make of your choice from Kögel), mechanical with compensating foot, approx. 24 t lifting capacity. Single-side operation, located on the right in the driving direction * Spray suppression system according to Regulation (EU) No. 109/2011 * 1 pair of quarter-circle mudguards in front of the axles * 1 pair of straight mudguards with mud flaps between the 1st and 2nd axle * 1 pair of quarter-circle mudguards with mud flaps behind the axles * 2 wheel chocks with brackets * Side underrun protection according to ECE-R732 * Waterproof plastic toolboxes, dimensions (internal) approx. 545 x 400 x 400 mm. Mounted at the rear, 1 left, 1 right * Rear right access ladder, extendable; high, rigid steel rear underrun protection according to ECE-R58 * 1 pair each of extendable warning panels for oversize loads, retroreflective red/white, with LED lighting, spiral cable, and connector. Arranged at the front and rear sections of the vehicle Brake / Air Suspension System: * EBS system 2S/2M with stability program (including ABS/ALB function), EBS connector ISO 7638 (without connecting lines), parking brake as spring-applied brake, external pneumatic connections, as well as external EBS diagnosis port via ISO 7638 connector * EBS system (make of your choice from Kögel) * Air suspension system incl. 1 lift and lower control valve, mounted on the left in the direction of travel behind the axle assembly. Driving height automatically adjusts * 2 foolproof coupling heads at the front ISO 1728 * Steel air tanks for brake system and air supply ( EN 286-2 ) Floor: * Floor panels approx. 30 mm thick * Floor joints sealed all-round * Stake pockets for square tube stakes approx. 80 x 80 mm, layout according to drawing J9: 8 stake pocket rails (18 stake pockets per rail: 4 each on the outside + 10 in the centre) Itedpfjx Uvlfsx Ahysb Front Wall: * Storage for up to 14 square tube stakes approx. 80 x 80 mm (length approx. 1,990 mm) on the inside front wall * Front wall approx. 2,000 mm high, with steel volume corner posts, made from profiled steel sheeting, bolted/riveted to the frame. 2 pairs of lashing rings (permissible lashing capacity approx. 1,000 kg per ring) at the bulkhead according to EN 12640 Side Wall: * VarioFix steel slotted outer frame * 24 pairs of lashing rings on the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring Bumper Protection: * 1 pair of steel buffer blocks approx. 160x85x85mm mounted on the outer rear frame plate * Transverse zinc-plated s

Condition: new, maximum load weight: 34,660 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire range of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Loading area: * Loading platform in double-extendable design with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing gear: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice Axles: * BPW axles, hydro-mechanically forced steering * Air suspension with lift and lower valve * Axle tool kit Brake system: * Brake system compliant with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel structure made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: Itsdsk Ugacepfx Ahyeb * Top quality, long-lasting corrosion protection of the standard shot-blasted welded chassis, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-colour in RAL 3002 carmine red * Rear section metallised and painted in RAL 9010 (pure white) * Wheel rims in silver * Metallic paintwork not possible Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection panel with 24N, 24S & 15-pin sockets; connections according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including accessories: * Remote steering from front and rear via cable remote control with push buttons, with single-track axis control (without installation in the tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with bracket on front wall * 2-inch king pin * Yellow-red air couplings on galvanised front connection panel * Yellow reflective tape according to EU regulations – on the sides, on the sliding extension and at the rear of the trailer * European reflective warning plates (red-yellow) at the rear of the trailer * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Loading area with heavy-duty hardwood floor * 10 pairs of stake pockets for plug-in stakes, 100 x 50 mm, in the outer frame * Bracket for rotating beacon at the rear * Galvanised supports under the loading area taper * Bracket for rotating beacon at the rear * Hook-in profile for ALU loading ramps at the rear of the vehicle * 80 km/h speed stickers, rear and both sides * Load gauge for axle load determination, including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps, using standard grease NLGI-2 and removable guard around the pump * Spiral cable for powering the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m length, max. 250A) between trailer and tractor unit with connector (NATO-NATO) * Anti-slip sand layer painted onto the centre beam * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; in the extension, an additional ...

Condition: new, Year of construction: 2023, machine/vehicle number: 11311387, power: 36.5 kW (49.63 HP), load capacity: 230 kg, overall weight: 6,800 kg, fuel type: diesel, fuel tank capacity: 65 l, tire size: 33*12-20, color: red, transport length: 6,870 mm, transport width: 2,000 mm, transport height: 2,300 mm, Equipment: all wheel drive, Brand: Mantall Type: HZ160JRT Engine: Kubota V2403, DOC + DPF - Stage V Isdpfx Ahotk Hkbeyotb Working height: 16 m Platform height: 14 m Bucket capacity: 230 kg Horizontal reach: 8.4 m Platform dimensions: 1170 x 1800 mm Width: 2000 mm Ground clearance: 360 mm Clearance height: 2000 mm Travel speed: 4.9 - 7 km/h Rotation: 360° discontinuous

Condition: used, Year of construction: 2006, operating hours: 2,386 h, Equipment: all wheel drive, Genie GS-3268 Scissor Lift * Operating hours: 2,386 h * Year of manufacture: 08/31/2006 * Working height: 11.75 m * Platform height: 9.75 m Itodpfx Aoyadnqshyeb * Load capacity: 454 kg * Weight: 4,203 kg * Platform extension: 1.45 m Mr. Mihm will be happy to assist you (phone). For more information, please visit our website. Subject to errors and prior sale!

Condition: used, Year of construction: 2004, operating hours: 2,465 h, Equipment: all wheel drive, Genie GS 2668 scissor lift Iodex E Iaispfx Ahyotb * Operating hours: 2,465 h * Year of manufacture: 03/08/04 * Working height: 9.90 m * Platform height: 7.92 m * Load capacity: 587 kg * Weight: 2,981 kg * Extension: 1.15 m Mr. Mihm will be happy to assist you by phone. For more information, please visit our homepage. Errors and prior sale excepted!

Condition: used, Year of construction: 2018, operating hours: 327 h, Equipment: all wheel drive, Dingli Magni GTBZ20AE articulated boom lift, year of manufacture: 06/2018, operating hours: only 327h!, 4x4 all-wheel drive, working height: 20.20m, lateral outreach: 11.14m, load capacity: 2 people (230kg), weight: 8,360kg, dimensions: (LxWxH) 6.71m x 2.49m x 2.45m, available immediately!, good condition. We can provide you with a leasing or financing offer upon request. Mr. Ebert (Tel. +49 1 811 220 800) will be happy to assist you. Further information can be found on our website. Errors and prior sale excepted! _____ English: Dingli Magni GTBZ20AE boom lift, year of manufacture: 06/2018, working hours: only 327h!, 4x4 all-wheel drive, working height: 20.20m, horizontal reach: 11.14 m, capacity: 2 persons (230kg), weight: 8,360kg, dimensions (LxWxH): 6.71m x 2.49m x 2.45m, good condition!, ready for work! Itsdpfsvaa Rkjx Ahyjb Mr. Ebert (Tel gladly assist you., For more information, visit our homepage., mistakes and prior sale reserved!,

Condition: used, maximum load weight: 55,320 kg, overall weight: 67,000 kg, axle configuration: > 3 axles, first registration: 03/1996, loading space length: 9,000 mm, loading space width: 2,550 mm, total width: 2,550 mm, Specification: - Air suspension - 9.00 m loading area - 3.60 m platform - 1 axle steered - 4th + 5th axle steered Other information: - 1 previous owner - Payload: 55,320 kg Since 1972, your reliable partner for automobiles and commercial vehicles in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always has approximately 200 vehicles available, including vans, commercial vehicles, and construction machinery! We continuously offer attractive financing solutions at special rates. If interested, we will be happy to prepare an individual offer for you! Trade-in of your commercial vehicle or construction machinery is welcome. If a new TÜV inspection is required, we are glad to offer this through our partner workshops. Please note that our offers are generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle is possible via our external partners for an additional fee. Itodpex Epc Sjfx Ahyjb All information provided in advertisements, online listings, price tags, and pictures are non-binding descriptions and do not constitute warranted characteristics. The seller accepts no liability or warranty for typographical or data transmission errors. Listed equipment should be checked separately where applicable. Subject to errors and prior sale.

Condition: used, maximum load weight: 17,520 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 9,100 mm, loading space width: 2,480 mm, loading space height: 600 mm, total width: 2,550 mm, total height: 1,720 mm, Equipment: ABS, 3-Axle Zikun ZK-AD3-PRXX Flatbed Container Trailer VIN: Z04127 Chassis / Attachments: * Air suspension with raise/lower function * Lift axle * Tyres: 265/70 R19.5 * Tread depth remaining: Front approx. 60%, Middle approx. 80%, Rear approx. 80% * Twin tyres * 2 x PVC toolboxes * Storage basket on the left side * Ride height approx. 1.10 m Body: * Zikun flatbed * Drop sides, 600 mm high * Kinnegripp folding stanchions * Steel floor with chequer plate * 5 x container locks per side * 8 x pockets for container locks per side * 14 x heavy-duty lashing eyes per side * 6 x heavy-duty recessed lashing eyes per side * Edscha sliding roof cover * Lashing rings * Dimensions: 9,100 mm x 2,480 mm x 600 mm * 22 pallet spaces Weights: * Gross vehicle weight: 24,000 kg * Unladen weight: 6,480 kg * Payload: 17,520 kg Miscellaneous: * 1 previous owner * New roadworthiness test (HU) possible * Very good condition New general inspections/safety checks or weight downgrades/upgrades available on request. We are happy to assist with obtaining export/transit license plates, and vehicle transport within Germany is also possible. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typing errors. Subject to change, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², we offer a wide selection of vehicles. Our company philosophy is characterised by fairness and professionalism. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to support them with their vehicle purchases or sales. See for yourself! Our services for you: Isdpjyadu Refx Ahyetb Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We gladly help you organise special transports. Temporary/export license plates We are pleased to assist you in obtaining export/temporary license plates. Customs formalities We are happy to assist you with customs matters.

Condition: used, Year of construction: 2008, machine/vehicle number: MR000037, Used planer-thicknesser, make: SCM. Machine with a planing width of 410 mm. Technical specifications: - Maximum planing width: 410 mm - Cutterhead diameter: 95 mm - Number of knives: 4 pcs - Cutterhead type: Standard - Maximum cutting depth: 5 mm - Maximum planing height: 230 mm - Minimum planing height: 3 mm - Planing height readout: Mechanical digital - Thicknessing table dimensions: 775 x 410 mm - Feed speed: 7/14 m/min - Thicknessing table height adjustment: Manual - Length of jointer tables: 2200 mm - Fence tiltable: 0–45 ° Iedsx Tpcuopfx Ahyjtb - Serial number: KK /096103

Condition: used, axle configuration: 2 axles, first registration: 11/1990,

Year of construction: 2026, condition: as good as new (ex-display), Workbenches in Pro version Precise and careful processing Completely made of steamed, solid beech All important edges are rounded Environmentally friendly oiled surfaces Standard with tool drawer The two cylinder rods of the collets are precise and stable in a casting With smooth trapezoidal threaded spindle French front caliper with German rear caliper with linear Guide, two round bench dogs short, long, two round bench dogs drawer and loading in Finger hot dip galvanizing in rear caliper and by charging back 1915 mm long work surface without pliers Width/depth work surface without pliers 615 mm Working height 870 mm Length 520 mm front caliper Length 450 mm rear caliper Wide front caliper 70 mm Itsdpfxsc Uydae Ahyob Wide rear pliers 140 mm Span front pliers 190 mm Span back pliers 180 mm Span front clamp until the Middle Hook 225 mm Span back pliers until the Middle Hook 265 mm Plate thickness 50 mm Length 2120 mm (product) Width/depth (product) 790 mm Height 870 mm (product) Weight 91 kg (net) Location: Off the shelf 54634 Bitburg

Condition: excellent (used), Year of construction: 1992, Technical data: - Grinding wheel diameter approx. 200 mm - Grinding wheel width approx. 32 mm Isdpfx Ahjwq Ea Reyotb - Wheel speed approx. 2500 rpm - Drive 400 V / 0.8 kW - Working height approx. 980 mm - Machine stand - Drive extraction 400 V / 1.5 kW - Space required approx. W 550 x H 1100 x D 650 mm - Weight approx. 70 kg Location: ex stock 54634 Bitburg - available immediately -

Condition: used, maximum load weight: 7,800 kg, overall weight: 14,800 kg, axle configuration: 2 axles, first registration: 07/2017, loading space length: 6,950 mm, loading space width: 2,870 mm, loading space height: 3,100 mm, loading space volume: 62 m³, total width: 2,950 mm, total height: 4,070 mm, Year of construction: 2017, 2-axle EGGERS industrial special trailer with steering axle Overall width: 2,950 mm! Without road approval Type: HXT 16 ZZL Gross weight: 14,800 kg 2 x 9 t BPW axles with air suspension, drum brake, and ABS EBS braking system Steering and drawbar connection consist of 2 BPW turntable-mounted axles, Mechanical steering linkage, backlash-free crank principle! Automatic coupling at rear for towing a 2-axle trailer, dual-circuit brake connections, 15-pin electrical connection Tyres: 8 units, 205/65R17.5 Fixed tarpaulin roof, side openings left and right Isdpfex Uaxpsx Ahyjtb 12mm phenolic plywood flooring Tarpaulin tensioning device Central locking for tarpaulin Vogel central lubrication system LED lighting Steering axle non-operational, steering linkage defective!