Used Work Stages for sale (52,586)

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 1,776 h, load capacity: 200 kg, mast type: telescopic, lifting height: 15,000 mm, lifting power: 230 kg/m, platform length: 700 mm, platform width: 1,400 mm, overall weight: 1,550 kg, empty load weight: 1,550 kg, transport length: 4,100 mm, transport width: 800 mm, transport height: 1,940 mm, construction height: 1,940 mm, fuel type: hybrid, fuel tank capacity: 7 l, color: red, We are offering this used Cela DT15 Spyder tracked platform, manufactured in 2016, for sale. Maximum reach: 7.50 m Minimum working height: 15 m Load capacity: 230 kg Rotation angle: 360° Hybrid: Honda GX440 gasoline engine + electric Self-leveling Additional options: 220 V + compressed air/water line in the work platform Width: 80 cm (without work platform) Ibsdpfxezv Ik Hj Ap Doc Height: 194 cm Weight: 1550 kg + 4 outrigger plates Never rented out, first owner Major service performed in December 2025 + new starter battery An IFOR WILLIAMS 3.5 T low-loader trailer is also available for sale (EUR 2800 + VAT). If you have any questions or would like more information, please send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2001, operating hours: 6,500 h, machine/vehicle number: S40-5934, load capacity: 227 kg, lifting height: 15,700 mm, fuel type: diesel, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Top maintained – extensive repairs – ready for immediate use For sale is a Genie S45 telescopic boom lift in very good technical condition. The boom lift has undergone extensive refurbishment and regular maintenance in the last two years. All invoices are available and can be viewed during inspection. Technical data • Manufacturer: Genie • Model: S45 • Year of manufacture: 2001 • Operating hours: approx. 6,500 h • Working height: 15.7 m • Platform height: 13.7 m • Lateral reach: 9.65 m • Load capacity: 227 kg • Drive: Diesel • Four-wheel drive • Serial number: S40-5934 Extensive investments: In 2023, the engine underwent extensive overhaul (invoice for €9,013 gross): • Engine completely serviced • Connecting rod and crankshaft bearings replaced • Piston rings replaced • Cylinder head gasket replaced • Starter replaced Isdpfx Apjzrgmro Dsbc • Oil, air, and diesel filters replaced • V-belt replaced • Numerous other wear parts replaced In 2024, further extensive maintenance and hydraulic work was carried out (invoice for €5,254 gross): • Swing drive motor replaced • Hydraulic pump sealed • Hydraulic hoses replaced • Hydraulic oil replaced • Engine oil and all filters replaced • Machine completely lubricated • Functional test performed • Safety inspection performed Condition • Technically fully functional • Ready for immediate use • Normal age-related signs of wear • No known defects • Inspection and test operation possible at any time by appointment. In 2023 and 2024, over €14,000 was invested in the machine. As a result, the boom lift is in significantly better technical condition than many comparable machines of this year of manufacture. Price: €13,900 net negotiable (16,680 € gross) Location: Laakirchen (Upper Austria)

Condition: used, Year of construction: 2002, operating hours: 3,702 h, empty load weight: 2,300 kg, Weight: 2300 kg Ibodezzplvopfx Ap Dsc Year of manufacture: 2002 Operating hours: 3702 The machine is in good condition and ready for use. Price: € 12500,- excluding VAT

Condition: good (used), Year of construction: 2005, operating hours: 1,200 h, Genie GS-2032 scissor lift, 2005, 8 meters working height. Ibsdpjzyau Sofx Ap Dsc A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can schedule a non-binding appointment for a viewing and/or test drive. Please call beforehand as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2019, operating hours: 1,893 h, load capacity: 200 kg, empty load weight: 2,850 kg, fuel type: electric, ATN Piaf 10E. Year of manufacture: 2019. Operating hours: 1893. Working height: 10 meters. Lateral reach: 3.5 meters. Working weight: 2850 kg. Working width: 100 cm. 24-volt batteries. Ijdszzgbzjpfx Ap Debc Integrated charger: 230 volts. Video available via WhatsApp. Price net + 21% VAT, or net for export with VAT number. We speak Dutch. We speak German. We speak English. Our general terms and conditions apply to all transactions! Machines are sold EX Works Winterswijk (Netherlands) in as-is condition!

Condition: used, Year of construction: 2007, operating hours: 11,172 h, Equipment: all wheel drive, MAKE: JLG TYPE: 660 SJC YEAR: 2007 CE MARKED: YES OPERATING HOURS: 11172 HOURS TIRES/UNDERCARRIAGE: 50% POWER: 46KW ENGINE: DEUTZ D2011 L04 WEIGHT: 12300 KG OPTIONS: 2 UNITS AVAILABLE JIB TRACK-MOUNTED AERIAL WORK PLATFORM 22.3M WORKING HEIGHT GOOD WORKING CONDITION KORENBLIK MACHINERY BV. VEENWEG 56 7336AG APELDOORN Ibsdpfx Ajzzi N Usp Dec THE NETHERLANDS VAT ID: NL864089764B01

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 106 h, machine/vehicle number: 11700153, load capacity: 680 kg, lifting height: 11,000 mm, platform length: 4,270 mm, platform width: 1,830 mm, overall weight: 3,975 kg, empty load weight: 3,975 kg, transport length: 4,400 mm, transport width: 2,130 mm, transport height: 1,780 mm, construction height: 2,670 mm, fuel type: electric, tire condition: 90 %, ground clearance: 250 mm, Equipment: all wheel drive, MEC 3084ES – Speed Level Self-leveling scissor lift Like new condition Ready for sale, just serviced. Ibsdezimi Ispfx Ap Dsc

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 107 h, machine/vehicle number: 11700154, load capacity: 680 kg, lifting height: 11,000 mm, platform length: 4,270 mm, platform width: 1,830 mm, overall weight: 3,975 kg, empty load weight: 3,975 kg, transport length: 4,400 mm, transport width: 2,130 mm, transport height: 1,780 mm, construction height: 2,670 mm, fuel type: electric, tire condition: 90 %, ground clearance: 250 mm, color: blue, Equipment: all wheel drive, MEC 3084ES – Speed Level Isdpfx Apsziml Ae Dsbc Like new condition Drive type: Battery-electric Recently serviced before sale.

Condition: good (used), Year of construction: 2008, operating hours: 506 h, fuel type: diesel, Manitou 180ATJ articulated boom lift / work platform, 18.18m working height, 4x4x4, 2008, diesel. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance, as we are not always on-site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland Ijdpozgal Rsfx Ap Dobc

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, operating hours: 3,332 h, machine/vehicle number: 16348, load capacity: 227 kg, lifting height: 15,940 mm, overall weight: 7,620 kg, empty load weight: 7,620 kg, transport length: 6,850 mm, transport width: 1,800 mm, transport height: 2,000 mm, next inspection (TÜV): 12/2026, fuel type: electric, tire condition: 100 %, drive condition: 100 %, color: red, We are offering for sale a boom lift from our fleet, with a working height of 16 meters, which has been regularly maintained. Thanks to the continuous and regular maintenance, the machine is in excellent technical condition. The purchase price includes recently prepared inspection reports issued in the customer's name, and we also provide detailed information on the condition of the batteries. You can find the complete and detailed specifications of the machine on our website. Ibedpfxozp Hl Nj Ap Dsc

Condition: good (used), Year of construction: 2012, operating hours: 185 h, fuel type: electric, Manitou 150 AETJ Compact Articulated Boom Lift / Work Platform 2012, 15.40m Working Height Video can be sent via Whatsapp. Ongoing stock, see our website. Prices are ex Nuland. Van de Wert Trading B.V. has a varying inventory of machines, trucks, trailers, and attachments. Ibjdpfszqhk Ajx Ap Dsc All our deliveries are at trade prices in AS-IS condition, without warranties. (see our general terms and conditions) You can make a viewing appointment and/or schedule a test drive without obligation. Please call in advance as we are not always present on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table, base -Base frame: Work table tubular frame frame with mounting plates for swivel casters -Width: 1200 mm -Depth: 800 mm Ibjdpezru Tmjfx Ap Djc -Height: 720 mm -Quantity: 1x workbench available -Weight: 29 kg

Condition: good (used), Year of construction: 2012, empty load weight: 3,600 kg, For sale: a well-maintained Niftylift in good working condition. Working height: 12 m. 4x4 diesel engine. Ibjdszz Sdbspfx Ap Doc Trade-in and transport options are available; please inquire. For more information, call or send a message.

Condition: used, maximum load weight: 35,560 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2026, next inspection (TÜV): 01/2027, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list: Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel construction * with continuous cross members, coupling plate 8 mm thick * with a 2-point kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1, brand according to choice, Kögel * Three-axle unit * with disc brakes Ø 430 mm * Offset approx. 120 mm, air suspension with approx. 180 mm travel Vehicle tires * 6x 385/65 R 22.5 UNIROYAL TH 50 Chassis components * Landing gear (brand according to choice from Kögel), mechanically operated with leveling foot, lifting capacity approx. 24 t * One-sided operation on the right side when driving, splash protection system (spray mist suppression) according to Regulation (EU) No. 109/2011 * for three-axle unit with 385/65 R22.5 tires * consisting of 1 pair of quarter-circle fenders in front of the axles * 1 pair of straight fenders with mud flaps between the 1st and 2nd axles * 1 pair of quarter-circle fenders with mud flaps behind the axles * Storage box for: 10 side panels, folding stanchions, and rear door or rear flap. Ibsdpfx Aezz Umxep Doc * Fully enclosed, protected against spray, also serves as a side protection, ground clearance (front) 220 mm * 2 plastic toolboxes, watertight, dimensions (internal) approx. 545 x 400 x 400 mm. * Installation at the rear, 1x on the left and 1x on the right, high, rigid underrun protection at the rear made of steel according to ECE-R58 * 1 pair of retractable warning signs for overwidth loads, retroreflective red/white, with LED lighting, spiral cable, and plug connection * Arrangement in the front and rear Vehicle area, brake / air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection cables) * Parking brake as spring-loaded brake * external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit when driving * Driving position adjusts automatically, 2 tamper-proof coupling heads in front ISO 1728 * Air tanks for brake system and air reservoir made of steel (EN 286-2) * Floor, flat floor approx. 30 mm thick, floor sealed around the perimeter, pocket for square tube inserts approx. 80 x 80 mm, arrangement according to drawing * 8 pieces of pocket strips (18 pockets per strip, 4 each on the outside + 10 in the middle) * Body, meets body strength according to EN 12642 XL (VDI 2700) * Tested for a payload of approx. 27,000 kg, front wall, storage for max. 14 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall, front wall approx. 2,000 mm high with steel corner brackets, with profiled steel sheet, screwed/riveted to the frame. * 2 pairs of lashing points (allowable lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * Rear wall, foldable rear wall approx. 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locking mechanisms * 2 folding steps on the inside, folding steel corner brackets at the rear at the height of the side panels * Side wall, 4 pairs of folding stanchions at the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stanchio

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 4,663 h, empty load weight: 14,500 kg, Manufacturer: Aichi Type: SP21 AJ / 12-4903 Year: 2008 Capacity (t): 227 kg Hours: 4,663 h Maximum working height: 23.00 m Maximum platform height: 21.00 m Ibjdpfjz Aqxgjx Ap Doc Maximum horizontal reach: 18.60 m Weight: 14,500 kg

Condition: good (used), functionality: fully functional, Year of construction: 2012, empty load weight: 6,970 kg, Manufacturer: Haulotte Type: HA12CJ Year: 2012 Capacity: 250 kg Ibsdpfx Aoz Aq E Tjp Doc Hours: 1,445 h Working height: 11.70 m Platform height: 9.70 m Platform dimensions: 1.15 x 0.80 (m) Total weight: 6,970 kg

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 3,379 h, Manufacturer: GSR Model: E200T Comfort X Year: 2016 Capacity: 250 kg Mileage: 43,416 km Operating hours: 3,379 h Working height: 20.2 m Max outreach: 13.0 m Isdpfx Apsz Argrj Debc

Condition: ready for operation (used), Year of construction: 2013, operating hours: 4,543 h, machine/vehicle number: 741424, lifting height: 15,900 mm, lifting power: 250 kg/m, overall weight: 8,200 kg, fuel type: diesel, Equipment: UVV, Includes AMTeK inspection. Maintenance history available. Ijdezcmipspfx Ap Djbc

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, operating hours: 2,368 h, power: 26 kW (35.35 HP), load capacity: 230 kg, lifting height: 16,400 mm, Equipment: all wheel drive, Diesel-powered, all-wheel-drive articulated telescopic boom lift ATN ZEBRA 16 Year of manufacture: 2017 According to the meter: 2,368 hours 16.4 meters working height 9.4 meters lateral reach Ibodszb Etkopfx Ap Djc 26 kW Kubota engine ALL-WHEEL DRIVE - Articulated boom - Telescopic boom - Immediately ready for use - Upon request: new Austrian inspection certificate provided before delivery! Selling price: €16,900 net Affordable delivery also possible!

Condition: used, maximum load weight: 32,650 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2022, next inspection (TÜV): 05/2027, loading space length: 13,630 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, 3 - Axle Schwarzmüller S1 Platform Trailer VIN: H484008 Chassis / Components: * Air suspension // Raising and lowering * Lift axle / Steerable axle * Jost Optima support legs * 3 x SAF axles with disc brakes * Tires: 385/65 R22.5 * Remaining tread depth: Front approx. 90%, Middle approx. 80%, Rear approx. 90% * Coupling height approx. 1140 mm * Spare wheel holder * 2 x PVC storage boxes Schwarzmüller * 2 x Rotating beacons on the underrun protection Superstructure: * Platform trailer for timber transport * 8 x stanchions per side, removable plug-in stanchions * 8 x stanchion pockets on the front wall * Front wall height 2,500 mm * Multilock * Slotted rail with lashing eyes 3,500 kg Ijdpfxezwrhle Ap Dsbc Weights: * Gross vehicle weight: 39,000 kg * Unladen weight: 6,350 kg * Payload: 32,650 kg Other: * German vehicle * MOT and safety inspection valid until 11/2026 ---- New main inspections / safety inspections or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange for the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English, and Russian!---- No liability for printing and typographical errors, changes, sales subject to prior sale, and errors. All rights reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on an area of 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly help you with the loading of your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day passes / Export license plates We will gladly help you in obtaining export license plates/short-term license plates.

Condition: new, empty load weight: 4,400 kg, maximum load weight: 19,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, suspension: air, tire size: 235/75 R17,5, wheelbase: 8,795 mm, Equipment: ABS, | Krone AD Jumbo Flatbed Trailer 3-Axle New | Multilock outer frame along the entire length | Air suspension front and rear (raise/lower) | Turntable with ball bearing slewing ring, low-maintenance | 40 mm drawbar eye | BPW axles with drum brakes | Spare wheel holder | Dimensions (L x W x H): 8.60 x 2.48 x 0.93 m | Steel front wall 1.60 m | Wheelbase: 8,795 mm | Tyres 12x front/rear: 235/75 R 17.5 | Subject to error, change and prior sale. Ibodpfxey H Ilzo Ap Dec

Condition: used, operating hours: 3 h, Genie Z-45/25J DC Electric Telescopic Boom Lift Genie Z-45/25J DC Electric Telescopic Boom Lift, year of manufacture: 2024, hours: only 3, working height: 15.9m, max. horizontal reach: 6.75m, lifting capacity: 227kg (2 people), all-wheel drive, weight: 7,482kg, ready for immediate use!, very good condition. Upon request, we will gladly provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. For more information, please visit our website. Errors and prior sale excepted! = Further information = Iodpfx Apezmctqj Debc Year of manufacture: 2024 Mast: Articulating boom Please contact Tobias Ebert for further information.

Year of construction: 1977, condition: ready for operation (used), Dimensional range: M6-M14, length range: 110mm, number of strokes min./max.: 110strokes/125strokes/min, max. wire diameter: 15mm, slide stroke: 160mm, pressing force: 100t, oil capacity: 70l, oil type: CLP 68, clutch manufacturer: Ortlinghs, air consumption at 30 operations/min: 800l/min, weight: approx. 23000kg. Ibsdpfx Aet Nhmhjp Djc

Condition: ready for operation (used), Year of construction: 2013, An Airo scissor lift is offered. Working height: 12200mm, platform height: 10200mm, platform extension: 1500mm, load capacity: 450kg, drive: diesel, configuration: 4×4 with outriggers. Machine dimensions X/Y/Z: 2970mm/1700mm/2490mm, weight: approx. 3200kg. An on-site inspection is possible. Ibedpfxjznc Nzj Ap Doc

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Working range X: 3855 mm Working range Y: 2650 mm Working range Z: 200 mm 5-axis electrospindle Vertical drilling heads: 29 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Saw blade for grooving in the X direction 33-position chain tool changer Worktable with 6 supports 250 m3/h vacuum pump (2023) Software: BiesseWorks and NC-Hops Direkt installed Chip conveyor belt Safety mats Protective netting Approximate weight: 6300 kg Ibjdez Atb Ropfx Ap Djc Only 2572 hours on the 5-axis spindle and 1488 hours on the drilling unit Available at the end of November 2026