Used Workshop Lathe for sale (10,138)

Condition: excellent (used), functionality: fully functional, spindle bore: 77 mm, Padovani lathe, model 230 x 1500mm, center distance. Admissible diameter over the bed: 460mm, over the carriage: 690mm, over the cross slide: 278mm, spindle bore: 77mm, 18 speeds – 0 to maximum rpm, 5.5 hp motor, with steady rest, with quick-change tool post, with various accessories. Lathe in very good condition. Fgode Ahrlfjpfx Am Eji

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Fodpfxsxtu Ere Am Eogi Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B • Hardened bedways • Bed stop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1980, Gurutzpe Super BT lathe 700 x 6000 mm e.p, turning over bed 1380mm, over cross slide 1045mm, over neck 1770mm, neck length before plate 620mm, diameter of the spindle bore 102 mm , speeds 2.8-400rpm, 40cv motor, plate of 4 independent jaws with a diameter of 1200mm, with a fixed steady rest and a mobile one, bed width 800 mm, diameter of the tailstock axis 140mm, max weight on lathes between points 10tns with a steady rest 12tns, estimated weight of the lathe 17600kg, pre-owned lathe electrical panel in very good condition condition Fgsdpfx Ameiqyv Io Eoi

Condition: excellent (used), turning diameter over cross slide: 1,100 mm, spindle bore: 102 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 1,950 mm, center height in crank: 800 mm, Lathe Gurutzpe Super BT 800 x 2000 mm e.p,with dimension display,turning on bed 1580mm,on cross slide 1100mm,on the neckline 1950mm,length of the neckline in front of the chuck 620mm,shank hole 102mm,36 speeds 2,8-400rpm,motor 30cv,4-jaw independent chuck diameter 1400mm, bed width 800mm, tailstock shaft diameter 180mm, lathe with dimension display, max weight on lathe between points 10tns with one steady rest 12tns, estimated weight of lathe and tooling 14450kg. Fgodpfx Aeq R Rknom Eoi

Condition: ready for operation (used), functionality: fully functional, L&Z Lathe MONDIALE GALLIC 16 N / 3 - 3-Axis Digital Readout ACU-RITE -Center height 165mm -Swinging diameter over bed 330mm -Distance between centers 1000mm -Spindle bore approx. 45mm -Three-axis digital readout ACU-RITE -Speed range (geared) 45 - 2000 RPM -Automatic longitudinal / cross feeds -Thread cutting, metric / inch, etc. -Quick-change tool holder -Tailstock MK 4 -Three-jaw chuck -Electric chuck guard -Chip guard -Drill chuck & traveling center -Documentation Dimensions: L x W x H 2.1 x 1.2 x 1.6 meters / Weight 1700 KG Fjdpfx As Ah T Sbem Esgi Errors and omissions excepted.

Condition: used, Manufacturer: KAMI, Model: SWL 660 B, in very good, ready-to-use condition. Year of manufacture: 2005 Maximum turning length: 2,000 mm Turning diameter: 800 mm Digital display Fgodpfxj Ah Rzxo Am Eei Steady rest Sturdy tailstock 3-jaw chuck Spindle bore diameter: 85 mm Approximate weight: 2,300 kg Dimensions: L 3,550 x W 1,150 x H 1,700 mm (Outer dimensions including attachments)

Condition: used, Year of construction: 2008, turning diameter 890 mm turning length 3000 mm turning diameter over slide rest 550 mm control Fagor 8055i ATC Revolver 8 tail stock MK 6 turning dia. in gap 1220 mm length of gap 450 mm spindle passage 106 mm Fgjdpfxsyqwaue Am Eei turning speeds 15-1480 U/min 3-jaw chuck 400 mm steady 300 mm The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: excellent (used), Year of construction: 2000, GILDEMEISTER DMG-CTX 400 twin CNC lathe with twin spindles and a single turret, year 2000 Includes workbench and its contents, and one tool cabinet with its contents. Fjdpfx Amj Ah Hyws Ejgi

Condition: used, total length: 3,600 mm, total width: 1,300 mm, total height: 1,400 mm, Colour: Green Empty weight: 3.500 kg - Drive system: Conventional - Centre height [mm]: 335 - Swing over bed [mm]: 670 - Carriage turning diameter [mm]: 670 - Distance between centres [mm]: 2000 - Bed width [mm]: 510 - Spindle bore [mm]: 83 - Min. spindle speed [rpm]: 16 - Max. spindle speed [rpm]: 1250 - Options: Fixed steady, Three-jaw chuck - Transport dimensions: 3600mm x 1300mm x 1400mm (l x w x h) - Transport weight [kg]: 3500kg - Transport packages [pcs.]: 1 Financial information Fodszhwbxjpfx Am Eegi VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2003, centre height 255 mm centre distance 1.080 mm turning diameter over bed 500 mm turning diameter over slide 290 mm turning length 1.000 mm control EuroTurn spindle bore 70 mm spindle taper KK 8 DIN 55027 3-jaw-chuck diameter 250 mm bed width 360 mm turning speed range 2 - 2.800 U/min rapid travel - longitudinal/face 10 / 5 m/min quick change toolholder PARAT Gr. 2 drive capacity - spindle motor 11,0 kW taper in tailstock-quill MK 5 dia. of quill 80 mm quill stroke 160 mm voltage 400 V total power requirement 16,0 kVA Fjdpfx Aowizltem Ejgi weight of the machine ca. 3,0 t dimensions of the machine ca. 2,85 x 1,60 x 1,80 m - Serial-No.: 495 / 03 - control: EuroTurn - quick change tool holder PARAT - coolant equipment - machine lamp

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY Fgsdpo Afg Tcefx Am Eoi - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, total height: 2,500 mm, total length: 3,500 mm, total width: 2,500 mm, Colour: Green Empty weight: 10.000 kg - Documentation available: Yes - Drive system: Conventional - Power [kW]: 11.5 - Centre height [mm]: 700 - Swing over bed [mm]: 1400 - Carriage turning diameter [mm]: 640 Fgsdpfx Ams Aattfo Eoi - Distance between centres [mm]: 800 - Bed width [mm]: 700 - Spindle bore [mm]: 80 - Min. spindle speed [rpm]: 240 - Max. spindle speed [rpm]: 110 - Options: Facing lathe, Quick-change tool post, Digital readout - Transport dimensions: 3500mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 10000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, CNC Lathe Manufacturer: GOODWAY Model: GS 280 Year of manufacture: 2014 Control system: FANUC Series Oi-TD Technical details: Control system: FANUC Series Oi-TD Swing over bed: 670 mm Swing over carriage: 500 mm Max. turning diameter: 400 mm Max. turning length: 600 mm Fgjdezvzaujpfx Am Eoi Spindle nose: A2-8 Spindle bore: 90 mm Front bearing diameter: 130 mm Spindle speed: 35 – 3,500 rpm Number of tool stations: 12 positions Additional information: In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 4397, Ladies and Gentlemen, We are selling a Weiler Praktikant 160 AC lathe built in 1998 with original Weiler 3-axis digital readout. This newer version "AC" stands out above all due to the infinitely variable speed control, which makes working on the otherwise very user-friendly machine even easier. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Machine no. 4397 Year of manufacture: 1998 Center height: 160mm Center width: 650mm Spindle passage: Ø 40mm Spindle speed: 20-3000 rpm stepless Tailstock taper holder: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation Fgjdpfxsq H D U Ee Am Esi

Condition: new, Year of construction: 2026, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Fjdpfx Ajyffylem Eegi Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: used, Year of construction: 2015, turning length: 1,000 mm, turning diameter: 210 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 1,050 mm, spindle motor power: 15,000 W, torque: 476 Nm, bar passage: 65 mm, CNC Lathe Manufacturer: DOOSAN Model: TL 2000 L Year of manufacture: 2015 Control system: Fanuc 31i Technical specifications: - Turning diameter: 210 mm - Turning length: 1000 mm Main spindle: Fgodpfx Amexq R Evo Eoi - Max. speed: 5,000 rpm - Drive power - main spindle: 15 kW - Max. torque: 476 Nm - Bar capacity: 65 mm Travel ranges: - X-axis: 250 mm - Z-axis: 1050 mm - X2-axis: 150 mm - Z2-axis: 1030 mm - Spindle hours: approx. 700 h Equipment & accessories: - Steady rest - Chip conveyor In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler high-precision lathe, model Condor 81, with lead and pull spindle, featuring a 3-axis digital display, Heidenhain ND780, from a training workshop. Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm Fgjdpfxo Afxx Hs Am Esi >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be activated >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display, Heidenhain ND780 >> 1 three-jaw chuck, new, with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets, some in duplicate >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Follower rest For safety: >> Guard for the lead and pull spindle >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, manufactured in 1988, in very good condition. The machine is fully functional. The lead and pull spindle are equipped with a guard for safety. This Weiler lathe comes from a training workshop. It is a very robust and powerful machine. The 3-axis digital display from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: new, Year of construction: 2026, flue capacity: 34 kW Conventional yeld capacity: 29 kW flue diameter: 160 mm hot air delivery pipes: 2 x 180 mm flue length: 500 mm oven width: 400 mm oven hight: 590 mm air flow: 2200 m³/h power consumption: 400 W Fjdpfx Amjk Utras Eogi aproximate surface to heat up: 500 m³ area to be heated: 100/150 m² heater height without hot air conveying pipes: 1560 mm heater width : 550 mm heater lenght: 920 mm weight: 190 kg

Condition: new, Year of construction: 2026, flue capacity: 125 kW Conventional yeld capacity: 99 kW flue diameter: 180 mm hot air delivery pipes: 2 x 250 mm flue length: 750 mm oven width: 560 mm oven hight: 700mm air flow: 6300m³/h power consumption: 1500W aproximate surface to heat up: 1500m³ area to be heated: 300/350 m² heater height without hot air conveying pipes: 1980 mm heater width: 800 mm Fgedpfsk Utrhex Am Eji heater length: 1280 mm weight: 415 kg

Condition: new, Year of construction: 2026, flue capacity: 350 kW Conventional yeld capacity: 279 kW flue diameter: 200 mm hot air delivery pipes: 3 x 300 mm flue length: 1200 mm oven width: 740 mm Fedpfx Amek Utrts Eogi oven hight: 1040 mm air flow: 17800 m³/h power consumption hot air fan: 3 kW power consumption flue gas exhaust: 600 W aproximate surface to heat up: 5000 m³ area to be heated: 1000 m² heater height without hot air conveying pipes: 2500 mm heater width: 1100 mm heater length: 1900 mm weight: 850 kg

Year of construction: 2017, condition: excellent (used), Number of axes: 8 Maximum machining diameter: 42 mm Maximum turning length: 300 mm Control system: FANUC Series 32i-Model B Bar feeder: BARLOAD Vito (left) Year of manufacture: 2017 Serial number: 22171425 Equipment: chip conveyor, chip transporter, filter, cooling unit Oil cooler: HABOR Tools: not included Fgodj Agvlzepfx Am Eoi

Condition: used, Year of construction: 2010, SMEC PL60A/3200, year 2010 Main operating parameters Fanuc control • Maximum turning length: 3200 mm • Maximum workpiece diameter: 900 mm • Cross-travel over the bed: 1030 mm Fgsdpfx As Ahh Nzsm Eei • Maximum diameter of workpiece bar: Ø 140 mm • Chuck size: 21 inches (optional 24 inches)

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Gurutzpe CNC lathe, model AT 600-Plus x 2000mm, equipped with Siemens CNC, featuring a Sauter automatic tool turret with 4 positions, a 105mm through-hole, a longitudinal feed rate of 10,000mm for the Z-axis, a transverse feed rate of 8,000mm for the X-axis, a 40Kw motor, 380V power supply, a bed width of 630mm between guides, a Morse taper of 5, a tailstock spindle diameter of 140mm, a main carriage length of 795, a transverse carriage width of 375, and a turning diameter over the bed of 1200mm. Accessories include a 3-jaw universal chuck with a 500mm diameter, a 4-jaw independent chuck with a 1000mm diameter, a fixed steady rest, and a traveling steady rest. It also has a chip extractor. The lathe is in very good condition. Fsdpfxe Ahrhxj Am Eogi

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 310 mm, turning length: 1,600 mm, turning diameter: 520 mm, spindle bore: 80 mm, spindle speed (max.): 2,500 rpm, Pinacho CNC lathe, Taurus-260 x 1500mm, equipped with a Fagor 8055 CNC control. Swing over bed: 520mm, swing over cross slide: 310mm, spindle bore: 80mm, variable speeds from 0-2500 rpm. The lathe features a universal 3-jaw chuck with a diameter of 250mm and a manual quick-change tool turret, and is equipped with a fixed steady rest. All bearings of the main spindle and tensioners have been replaced with new ones. The lathe is in very good condition. Fgedpfxjzmp Etj Am Eoi

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Pinacho Smart Turn 6 CNC lathe, 200 x 1000 mm, with Fanuc OI Mate TC control, 65 mm spindle bore, 400 mm swing over carriage, 210 mm swing over cross slide, 4-position automatic tool turret, two speed ranges (0-675 rpm / 675-3000 rpm), working feeds 0-10000 mm/min, 7.5 kW motor, year 2007, in very good condition. Fodpfx Amsztz Aws Eegi