Used Za 3000 for sale (5,907)

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Control Techniques, Servo Drive -Type: MAXAX 100/3000 -Input: 1.5 kVA Kodpjzrlixsfx Anwjnc -Output: 1 kW -Number: 2x Servo Drive available -Price: per piece -Dimensions: 275/110/H235 mm -Weight: 2.8 kg/pc.

Year of construction: 2005, condition: used, - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Used destacking unit Manufacturer: Meinert Type: AM 33 - 3000 /1300 Systems Year of manufacture: 2005 Technical data - max. 28 cycles/min for single stacks - max. 50 sheets/min when collecting sheets in the direction of travel, with several sheets arranged one behind the other - max. 50 sheets when collecting 2 sheets on top of each other (special version of the infeed belt conveyor) Design - Infeed belt conveyor in front of the system (special version: pneumatically adjustable for collecting 2 parts on top of each other) - Infeed belt conveyor in the paternoster - 2 paternoster walls – fixed side and motor-adjustable loose side - Synchronized stop adjustment – infeed and stacking positions AM 33: 2 stacking positions on one lifting device with powered roller conveyor - Personnel protection consisting of safety grilles and automatic sliding gates Knedpszuz N Tofx Anwjc - Control cabinet according to VDE regulations - PC control in a separate PC cabinet Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, mileage: 56,265 km, power: 72 kW (97.89 HP), color: orange, gearing type: automatic, emission class: euro6, total length: 48,300 mm, total width: 17,500 mm, total height: 22,900 mm, Year of construction: 2019, Equipment: air conditioning, For inquiries regarding the vehicle, please contact Mr. Seidel (tel. number). Dulevo 3000 Sweeper 7,616 operating hours, 40 km/h, air conditioning, reversing camera system, air suspension seat, seat heating, electrically adjustable exterior mirrors, heated exterior mirrors, halogen headlights, all-round lights, tire tread: 1st axle 5-9mm, 2nd axle 14-21mm, permissible total weight: 7,260kg Upon request, we will provide you with a leasing or financing offer. Mr. Seidel (tel. number) will be happy to assist you. You can find more information on our website. Ksdpfxszdbnce Anwonc ... Errors, changes and prior sale reserved!!! Right-hand drive = More information = Engine displacement: 2,970 cc GVWR: 7,260 kg Last inspection: 2027-03 Please contact Tobias Ebert for further information.

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Kedpfxjc S N Nqj Anwsnc Make FACCIN, model HAV/S 3145 Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: new, functionality: fully functional, Year of construction: 2026, 4 HEL 3128 Four rolls bending machine Electronically controlled, hydraulic four-rolls bending machine Make FACCIN, model 4 HEL 3128 Technical specifications: Number of Rolls: Four Geometry of the side rolls: linear guides Working width: 3050 mm Top roll diameter: 285 mm Lower roll diameter: 275 mm Side rolls diameter: 205 mm Certified rolls hardness: 950-1050 N/mm² Pressure force against the top roll: 150 tons Working pressure at maximum power: 190 bar Guaranteed installed power: 11 kW (15 hp) Guaranteed maximum rotation speed: 4-8 m/min Guaranteed machine weight: 9,000 kg Length: 5,450mm Width: 1,520mm Height: 1,450mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 12 mm Bending capacity (full working width) 8 mm from a pipe diameter of 1,425 mm Rolling capacity (full working width) 8 mm Bending performance (full working width) 6.5 mm from pipe diameter 370 mm Standard equipment: Double linear guide system for rolls movement Extremely wide bearing blocks MCS double bearing system for the rolls rotation Knedpfx Anjiink Sjwoc Extra heavy double hinged folding release Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7 PLC control Hitech hydraulic and electric package Safety trip wire with emergency stop and CE certification central lubrication cone bending device FACCIN AP package CNC control PGS-ULTRA

Condition: used, Year of construction: 2005, Mitsubishi Diamond 3000 S -5 is a printing machine manufactured by Mitsubishi in 2005, with a format of 720 x 1020 mm and a print count of 300 million. Currently in production in Turkey, it features IPC II Intelligent Press Control, high-speed separators, a refrigeration and recirculation system, Grafix Digitronic powder device, SAPC semi-automatic plate changers, non-stop feeders, cylinder washing device, automatic plate cylinder cocking, automatic blanket washing device, and Mitsubishi Delta dampening system. The delivery terms are FCA. Format: 720 x 1020 mm Kjdpfx Asvfxnxjnwonc Equipment: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Condition: new, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length 3000 mm • Width 2000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 Knjdpfjymf R Hox Anwec • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, RepairFIT by Dornhöfer The difference. Includes installation & commissioning! KEY TECHNICAL DATA Machine year of manufacture: 2016 Capacities / Travel: Longitudinal (X): mm 3,000 Vertical (Y): mm 2,000 Knsdpfx Anezux Awjwjc Lateral (Z): mm 1,500 Clamping surface, NC rotary table: Swivel table: mm 1600 x 1400 Transport load: kg 15,000 Positioning accuracy: arc/sec ±2.5 Paint finish: graphite gray RAL 7024 / agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power (from 376 rpm): kW 40 Spindle speed range: Spindle speed: min-1 0 - 3,000 Torque: Nm 1,360 Speed control: 3-stage (oil-cooled) with automatic switching Connection power: kVA approx. 53 Feeds: Working feed max.: X, Y and Z axis mm/min 15,000 Max. Rapid traverse speed: X, Y and Z axis mm/min 25,000 Space requirement Length approx. mm 8,500 Height approx. (without tool changer) mm 4,200 Width approx. mm 5,600 Weight: kg approx. 29,200 HEIDENHAIN iTNC 530 HSCI Automatic MTE milling head Diagonal Automatic tool changer Chip conveyor Coolant system with 50 bar & (IKZ) Full enclosure for working area (closed at the top) Extraction system for the aforementioned full enclosure Special operating mode RepairFIT is our proven offer for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, the identified obvious defects and faults were professionally repaired by our skilled service team.

Condition: used, Year of construction: 1998, - Belt width: 300 mm - Belt length: 1800 mm - Max. working height: 200 mm - Feed rate: 6 / 11 / 16 m/min Sanding machine Manufacturer: Löwer Type: DSM 3000 Year of manufacture: 1998 Dimensions, space requirements and weight Length: 2660 mm Width: 1020 mm Height: 1890 mm Knjdpfx Anezuzbijwjc Space requirement: (for operation, tool changes, maintenance) Length: 2660 mm + 2 x workpiece length Width: 2100 mm Height: 2000 mm Weight: 1600 kg Technical data Belt width: 300 mm Belt length: 1800 mm Max. working height: 200 mm Sanding motor - Rated power: 2 x 7.5 kW Sanding motor - Rated current: 2 x 15.4 A Sanding motor - Speed: 2870 rpm Feed motor - Rated power: 0.25 / 0.55 / 1.0 kW Feed motor - Rated current: 1.0 / 1.9 / 2.6 A Feed motor - Speed: 700 / 950 / 1420 rpm Belt speed: 1300 m/min Feed rate: 6 / 11 / 16 m/min Brush motor - Rated power: 2 x 0.37 kW Brush motor - Rated current: 2.1 A Brush motor - Speed: 1405 rpm Brush length: 290 mm Brush diameter: 120 mm Height adjustment motor - Rated power: 0.37 kW Height adjustment motor - Rated current: 0.81 / 1.15 A Height adjustment motor - Speed: 600 / 2680 rpm Extraction Connection size: 2 x = 150 mm 2 x = 120 mm Airflow: 2515 m³/h Minimum air velocity at the machine connection: 20 m/s Negative pressure at the extraction port: 889 Pa Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2019, condition: excellent (used), input voltage: 400 V, machine/vehicle number: 3368, BVL Yukon DAK-1 BL 500/50/3000 – Continuous cleaning system with drying, year of manufacture 2019 BVL continuous cleaning system for aqueous spray cleaning of workpieces. The conveyor belt guides the parts through the washing and drying areas. The system operates with a washing tank and blow-off and recirculating air drying. The tank treatment includes coarse and fine filtration, a plate separator for oil removal, as well as automatic monitoring and replenishment of the cleaner via Libelle Cleaner Control. Technical data - Manufacturer: BvL Oberflächentechnik GmbH - Model: Yukon DAK-1 BL 500/50/3000 Knedoz A Eiqepfx Anwjc - Year of manufacture: 2019 - Machine number: 3368 / internal reference: 781467 - Usable dimensions: Length 250 mm, Width 2 × 250 mm, Height 50 mm - Belt load according to nameplate: 20 kg/m with uniform load distribution - Washing tank: 1,000 liters - Electric tank heater: 45 kW - Washing pump: 4 kW, spray pressure 3 bar - Coarse filter: 1 mm; Fine filter: 50 µm - Recirculating air drying: 12 kW heating power - Control system: Siemens SIMATIC S7-1500, CPU 1513-1 PN - Operator panel: Siemens TP700 Comfort - Power supply: 3 × 400 V, N+PE, 50 Hz Equipment - Plate separator 200 - Libelle Cleaner Control with automatic cleaner dosing - Condenser LKP1000 - Side channel blower SD740 - Automatic cleaning of the blow-off zone - Nozzle system with quick-release coupling - Two viewing windows with internal lighting - Control panel on the support arm system Operating manual, maintenance documents, mechanical drawings, electrical and pneumatic diagrams, and an SPS project archive are available. Condition: used, very good. Location: Waldmohr. Price on request.

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW SP8 Command Blades with 4 cutting edges Voltage: 380 V Kjdez Hwiqepfx Anwenc Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Year of construction: 2017, condition: used, empty load weight: 28 kg, Brand: Hilti Model: TE 3000-AVR Knjdpfx Anjzx Ihdjwoc Year: 2017 Weight: 28 kg Impact energy: 85 joules Condition: Used, in good working condition Price: € 1250,- ex VAT Multiple units in stock.

Condition: used, Year of construction: 2012, functionality: fully functional, control type: PLC-controlled, actuation type: electric, bar diameter (min.): 6 mm, bar diameter (max.): 50 mm, power: 2 kW (2.72 HP), input voltage: 400 V, Bar feeding system by Irco Breuning Simag 50.1R 3000 bar lengths up to 3000 mm maximum capacity 50 mm guide rods of 15, 22, 30, 45 mm various collets Knjdpjzz Hubefx Anwjc

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, warranty duration: 24 months, type of cooling: air, DGUV certified until: 10/2027, welding current (max.): 300 A, input frequency: 50 Hz, Equipment: type plate available, OTC Daihen welding machine CPTX-I 3000, 300 amps, 4-roller drive, complete with 4m welding torch, ground cable, pressure regulator, and accessories. Ksdpfoz H Uz Rox Anwonc

Condition: used, Year of construction: 2011, Croissant machine Tekno Stamap Croymat 3000 Year of manufacture: 2011 Condition: functional Knjdpfx Aoz A Sffjnwsc Working width approx. 550 mm Includes cutting rollers for 3-row production Output (3 rows): max. 1800 pieces Weight range (3 rows): 80-100 g Dimensions, triangle shape (3 rows): approx. 150x200 mm Additional rollers available upon request External dimensions (L x W): 3000x2200 mm

Condition: ready for operation (used), ProPen P 3000 PN Marking Device Marking area: 100 × 100 mm Max. workpiece height: approx. 330 mm Max. traverse speed: 154 mm/s Character size: 0.5–79.9 mm Compressed air: 6 bar Power: 120 W Weight: approx. 30 kg Dimensions: approx. 420 mm × 270 mm × 740 mm (L x W x H) You are welcome to visit us for a demonstration. We will gladly organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Ksdpfx Asz Hi R Tjnwjnc Visit our shop and browse our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data and errors in the description of the item may occur and are subject to change.

Condition: used, X: 4000 MM Y: 2500 MM Z: 1000 MM DISTANCE BETWEEN UPRIGHTS: 2000 MM TABLE 1: 3000 X 1500 MM - CAPACITY: 12 TONS TABLE 2: 3000 X 1500 MM - CAPACITY: 12 TONS SPINDLE SPEED: 20 - 4000 RPM HEAD CHANGER: YES. COMPLETE WITH UNIVERSAL AUTOMATIC HEAD - ORTHOGONAL HEAD WITH C-AXIS - VERTICAL HEAD TOOL CHANGER: 120 POSITIONS Kjdezzqufopfx Anwjnc CNC: FIDIA

Condition: used, plate width 3000 mm plate depth 5000 mm plate height 400 mm weight 20 t Ksdpfxjgrnfgj Anwenc dimensions of the machine ca. 5 x 3 x 0,5 m Table length 5000 mm Table width 3000 mm Table height 380 - 400 mm Machine weight approx. Approx. 20000 kg Space requirement approx. 5 x 3x 0.5 m

Condition: good (used), Year of construction: 2000, 1 4-Bahnen-Flachbett (die 2 äusseren für Z-Schlitten; 2 innere für Reitstock) mit verfahrbarem Z-Schlitten auf äus seren 2 Führungen; Abstand 1160 mm auf inneren Führungen für Reitstock 700 mm Bettlänge mm 5300 Spitzenweite (Drehlänge zw. Futter-Höhe und Spitzen ) mm 3000 Spitzenhöhe mm 800 Drehdurchmesser über Bett mm 1600 Drehdurchmesser über Kreuzschlitten (zwischen Spitz en) mm 1400 Umlaufdurchmesser über Schlitten mm 1200 Bettbreite Führung Aussen mm 1160 Führungsbreite Reitstock MItte mm 700 Bett geschweisst; entspannt durch WIAP-Ersatzglüh- verfahren und vibrationsgedämpft nach dem pat. Verf ahren WIAP® VDSF® (Pat.Nr. 68433; Anm.4230130.30;PCT/CH95-00108; PCT/CH95-00108, PCT/CH95-1072, PCT/CH95-1073) Führungsauflagen geschliffen; Führungen austauschba r ohne Bettdemontage 1.2 Spindelstock / Hauptantrieb - festangeordnet Anzahl Spindelstöcke Stk. 1 Spindelmesskreis digital / linear Achsenlagenüberwachung keine; da Rundachse Spindelbohrung mm 112 Spindelnase A15 DIN 55021 Hauptspindelmotor: 100% ED kW 46 Nm 305 Motor 1PH7184 2NE Leistungsteil 6SN112-1AA00-0FA Hinter dem Spindelstock aufgebautes 3 Stufen Getrie be Automatisches über M Funktion programmierbares Getriebe Getriebstufe 1 RPM 5,6-120 Getriebstufe 2 RPM 16-360 Getriebstufe 3 RPM 45-800 Drehmoment Stufe 1: (100%) Nm 15236 Drehmoment Stufe 2: (100%) Kodpfx Asd D Nxkenwonc Nm 5290 Drehmoment Stufe 3: (100%) Nm 1904 Max Drehzahl RPM 800 1.3 Längs- und Querschlitten Stk. 1 Anzahl Querschlitten Stk. 1 Anzahl Längsschlitten digital / linear Achsmessystem am Motor Balluf Achsendlagenüberwachung (3er-Schaltpaket) RpM 2000 Achsantrieb Z-Vorschubmotor 27 Nm mm 1005 2 X Schlitten unabhängig verfahrbar Max Abstand in nen Ueber M Funktion ankoppelbar X Schlitten 1 4 Fach Rev. und X Schlitten 2 mit Angetr. Revolver kN 27 Vorschubkraft mm 6000 Max Vorschub / Eilgang Z mm 63 x 10 Vorschubart: spielfreie Kugelrollspindel mm 3020 Verfahrweg Z-Achse m / min 6* Eilgang Z-Achse (Auslegung 10 m / min) RpM 2000 Achsantrieb X-Vorschubmotor 1FT5076 18/22 Nm kN 15 Vorschubkraft mm 6000 Max Vorschub / Eilgang X mm 50 x 10 Vorschubart: spielfreie Kugelrollspindel mm 850 Verfahrweg X-Achse m / min 10 Eilgang X-Achse 1.3a Reitstock manuell verstellbar; luftunterstützt für leichtes V erschieben vibrationsgedämpft mit Konus für Reitstockspitze Pinolen-Durchmesser mm 200 Pinolen-Hub mm 200 Hilfsschleppeinrichtung mit dem Z-Schlitten vorhand en Klemmung mit Mutter & Hebel / Ringmutter mit div. Gewinden im Umkreis; versetzbar 1.4 Führungen Alle Führungen sind auf geschliffenen Flächen und reibgeklebt Abmessungen mm 90 x 50 Härte der Stahlführungen ca. HRc 55 - 60 Gegenführungen kunststoffbeschichtet Automatische Zentralschmierung mit elektr. Kontroll e Die schweren Einheiten werden für den Leichtlauf un d gegen Verschmutzung luftunterstützt mit dem WIAP® Press-Air-Verfahren 1.5 Werkzeugrevolver mit angetriebenen Werkzeugen Werkzeugrevolver Baruffaldi TOER 320 Typ K18.0320.12041.B Anzahl Pos Pos 8 Zylinderschaft-Durchmesser VDI 60 Revolver Scheibe Durchmesser aussen mm 570 Revolver Scheibe Durchmesser VDI 60 mm 476 Scheiben Dicke mm 95 Angetriebene Werkzeuge Stk. 4

Condition: good (used), Year of construction: 2010, Horizontal bed - Prismatic/flat guideway hardened and ground Working range - Swing diameter over bed mm 1000 - Swing diameter over cross slide mm 700 - Slide path flat mm 600 Main spindle drive - Digital AC motor - 60% ED kW 46 Gearbox - ZF planetary gear stages 2 - electrically switched - Mounted outside the headstock Headstock - Spindle head DIN 55026 size A11 - Spindle diameter in front bearing mm 190 - Spindle bore mm 132 - Spindle taper metr 140 - Speed range rpm 1-1800 Cross slide - Feed range flat mm/rev 0.001-1000 - Feed range longitudinal mm/rev 0.001-2000 - Thread pitches mm 0.01-999.9 - Rapid traverse plan/longitudinal m/min 5/10 - from center distance 4000mm m/min 5/7 - Automatic central lubrication - Digital AC servo motors plan and longitudinal Tailstock Knedpfxsr D Nmyo Anwoc - Quill diameter mm 125 - Quill stroke mm 280 - Mounting taper MK 6 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide

Condition: excellent (used), Mounting plate, scribing plate, measuring plate, measuring table, straightening plate, scribing plate, test plate, inspection plate, precision measuring table Kedpfx Answ Dzk Eowsnc -Clamping surface: 3000 x 2000 mm -Quantity: 3 mounting plates available -Price: per piece -Note: The mounting plates can be screwed together end-to-end, as the end faces are milled. -Possible clamping surfaces: 3x 3000 x 2000 mm (1x 9000 x 2000 mm) (1x 6000 x 3000 mm) -Sheet thickness: 60 mm -Plate: with supporting ribs -Dimensions each: 3000/2000/H360 mm -Weight: 4500 kg/unit

Condition: new, plate width 3000 mm plate depth 1500 mm plate height 300 mm weight 3580 kg dimensions of the machine ca. 3000 x 1500 x 300 mm GERD WOLFF clamping plate 3000 x 1500 x 300 mm If you cannot find the size you need, you can also send us an e-mail with the completed PDF form (attached). This way, we can manufacture a clamping plate according to your requirements. T-slot size: 52 x 28 T-slot spacing: 300 Kodpfjyk Ik Dsx Anwonc Number of slots: 5 Edge distance: 150 Weight: 3580 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/III

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Knedpfexxm A Hsx Anwec Tool holder Steadies Live centre

Condition: new, Year of construction: 2025, functionality: fully functional, pressing force: 180 t, Pressure: 180 t Bending length: 3100 mm Frame width: 3100 mm Control: Cybelec CybTouch 15 Knedpfx Anowz Et Sewsc Stroke: 250 mm Installation height: 470 mm Rapid approach (down): 180 mm/s Bending speed: 0-10 mm/s Rapid return (up): 165 mm/s Total power requirement: 15 kW Machine weight approx.: 14,000 kg Dimensions: 4255 x 2390 x 3030 mm Standard equipment: - CNC control Cybelec CybTouch 15 Windows - 4 + 1 axes: Y1, Y2, X, R, C - Mechanical crowning system: B-CM - Backgauge system mod. GHP-2 - Servo-driven main motor - Safety system: DSP AP+MCS Additional equipment: - 2 x front support tables - 2 x stop fingers - Hydraulic upper tool clamping Wila Style - Hydraulic die clamping Wila Style - CE standard norm

Condition: reconditioned (used), functionality: fully functional, power: 44 kW (59.82 HP), overall weight: 70,000 kg, total height: 5,400 mm, total length: 22,200 mm, total width: 5,400 mm, Rotary Drum Dryer Dutch Dryers - DX 3000 Rebuilt in 2021 Motor power 2 x 22 kW Drive chains and sprockets new Frequency inverter new Ksdsyxm E Rspfx Anwonc Can be disassembled into 6 parts Total weight approx. 70,000 kg Hardly any signs of wear