Used Zippo 1250 for sale (1,682)

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 48 V, total height: 782 mm, total length: 1,220 mm, total width: 352 mm, Tested forklift battery for your truck - 48V 4PZS 620Ah - DIN C + 1 year warranty + Includes Aquamatik (automatic filling system) + Includes end cell connector & REMA 320 plug (other plug types can be fitted upon request) + Capacity: min. 90-100% (C5 capacity test protocol included on delivery) + Year of manufacture: 2024 Dimensions: Length 1,220 mm Width 352 mm Height 782 mm Weight: approx. 960 kg Suitable for the following models and many others: Linde A (1250) - 5022-00 Linde A - 5224-00 Linde R 10 B - 1120-00 Linde R 10 B - 1120-00 - front battery change Linde R 12 B - 1120-00 Linde R 12 B - 1120-00 - front battery change Linde R 12 C - 1120-00 Linde R 14 - 1120-00 Linde R 14 - 1120-00 - front battery change Linde R 14 B - 1120-00 - front battery change Linde R 14 G - 1120-00 - front battery change Linde R 14 HD - 1120-00 Linde R 14 HD - 1120-00 - front battery change Linde R 14 W - 1120-00 Linde R 14 W - 1120-00 - front battery change Linde R 16 - 1120-00 - front battery change Linde R 16 AS - 1120-00 - front battery change Linde R 16 AS 1270 - 1120-00 Linde R 16 B - 1120-00 - front battery change Linde R 16 C - 1120-00 Linde R 16 G - 1120-00 - front battery change Linde R 16 HD - 1120-00 Linde R 16 HD - 1120-00 - front battery change Linde R 16 S - 115-00 Linde R 16 S ACTIVE - 115-12 Linde R 16 W - 1120-00 Linde R 16 W - 1120-00 - front battery change Linde R 20 - 1120-00 Linde R 20 - 1120-00 - front battery change Linde R 20 - 115-00 Linde R 20 G - 1120-00 - front battery change Nsdpfx Aaey Rniujtewn Linde R 20 G - 115-12 Linde R 20 S - 115-12 Linde R 20 W - 1120-00 - front battery change Still FM 14 Still FM 17 Still FM-X 12 Still FM-X 14 Still FM-X 17 Still FM-X 20 Jungheinrich ETV Jungheinrich ETV 112 Jungheinrich ETV 214 Jungheinrich ETV 216 Jungheinrich ETV 320 Jungheinrich ETV 325 Jungheinrich ETV C 16 Toyota/BT RRE 200 Crown ESR Crown ESR 3020-1.4 Crown ESR 3020-1.6 Crown ESR 3020-2.0 Crown ESR 4000-1.4 Crown ESR 4000-1.6 Crown ESR 4000-2.0 Crown ESR 4500 Crown ESR 4500-1.4 Crown ESR 4500-1.6 Crown ESR 4500-2.0 Crown ESR 5000 Crown ESR 5000 S Crown ESR 5000-2.0 Crown ESR 5240 Crown ESR 5240-1.4 Crown ESR 5260-1.4 Crown ESR 5260-1.6 Crown ESR 5260-2.0 Crown ESR 5280S-1.6 Crown ESR 5280S-2.0 Atlet REACH TRUCK Atlet UMS 160 Atlet UMS 200 Atlet UNS 140 Caterpillar NR14/16 Caterpillar NR14N Caterpillar NR14N2S Caterpillar NR16N Caterpillar NR16N2HS Caterpillar NR20NH Hyster R1.6 Mitsubishi RB14N Mitsubishi RB14N2S Mitsubishi RB16N Mitsubishi RB20N2H Mitsubishi RB20NH Nichiyu FBR14-75B OM-Pimespo-Fiat XR 14 AC Rocla REACH MAST TRUCK Yale MR 14 Yale MR 16 Common battery sizes available on request. Transport possible.

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Clamping angle: for workpiece clamping Nwedpfsxrgbpjx Aaton -Table surface: 1000x800 mm, height 1250 mm -Wall thickness: 90 mm -T slots: slot width 36 mm -Dimensions: see photos -Dimensions: 1000/800/H1250 mm -Weight: 1069 kg

Condition: excellent (used), Year of construction: 1981, functionality: fully functional, pressing force: 1,250 t, stroke length: 630 mm, table width: 1,270 mm, table length: 1,250 mm, overall weight: 70,000 kg, working height: 900 mm, Equipment: safety light barrier, Dieffenbacher P0-F 1250A press Nedpfx Aasv E Rihotewn A press in very good technical condition, available for sale from a stamping shop that is being closed down in Poland. Modernized in 2016. Features a new Simatic S7 control system and a new electrical cabinet. Optical barriers have also been installed.

Condition: used, Year of construction: 2005, machine/vehicle number: 25748, Equipped with: Central Lubrication Machine Flushing Coolant Filtering Equipment 480V, 60 Hz Electrics Headstock W/Center Tailstock W/Center Auto Loading Hydraulic System Pneumatic System Central Lubrication Coolant Filtering Equipment Specifications: Working Range of the Machine: -Centering Width: 600 - 1250 mm -Maximum Workpiece Diameter: 320 mm -Oscillation Stroke: +/-1 mm in relation to the oscillation frequency -Oscillation Frequency: 0-200 double strokes/min infinitely adjustable -Spindle Rotation Speed: 0-150 min -1 infinitely adjustable -Loading Height Above Floor: 1,050 mm Nwedpfxszn Az Ds Aaton Horizontal Axis Machine Column Travel: 1650 mm Headstock - Rotation: -Workpiece Rotational Speed: n2= 0-200 min-1 limited to n2=0-150 min -1 Headstock - Oscillation: -Oscillation Frequency: n2 = 800 double strokes/min -Oscillation Amplitude: =/- 1 mm Tailstock - Hydraulic Axis: -Stroke: 250 mm -Analog Transducer: Measuring length 300 mm Machine Weight: Approximate 8 Tons Approximate Space Requirements (Width x depth x height): -Machine: 3,6 x 3,3 x 3,3 meters -Switch Cabinet: 2,4 x 0,6 x 2,1 meters -Hydraulic Aggregate: 0,9 x 1,3 x 1,9 meters -Coolant Filtering Equipment: 1,3 x 1,0 x 2,0 meters Approximate Total Space Requirements: 35,5 meters

Condition: good (used), Year of construction: 2008, Dahlih MCV1250B Fanuc series 0i-MC Travel range: X1250mm, Y650mm, Z700mm Table dimensions: 1400x820mm Max. table load: 1500kg Spindle taper: BT40 Nwedpfoztkaxjx Aaton Tool changer: 24 positions Max. spindle speed: 8000rpm Rapid traverse: X,Y 20000mm/min, Z12000mm/min Weight: 10500kg Includes Dahlih 4th axis (A-axis) Includes accessories, documentation, and parameter lists/backups.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 5752, travel distance X-axis: 1,250 mm, travel distance Y-axis: 540 mm, travel distance Z-axis: 520 mm, spindle speed (max.): 2,000 rpm, controller manufacturer: Heidenhain, TECHNICAL DETAILS Travel range, X-axis: 1,250 mm Travel range, Y-axis: 540 mm Travel range, Z-axis: 520 mm Table length: 1,800 mm Nedpfx Aezxdxljatjwn Table width: 400 mm Tool holder: BT50 Main spindle power: 7.5 kW Spindle speed: 275–2,000 rpm MACHINE DETAILS Control: CNC Control system: Heidenhain Number of axes: 3 Connected power: 12 kW Dimensions & Weight Dimensions (L × W × H): 2,100 × 2,100 × 2,200 mm Net weight: 3,600 kg Number of transport packages: 2 EQUIPMENT Tools Documentation CE marking

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Welded frame - Modular accessories - Docking edge for ramps Net: €7,134.45 / Gross: €8,490.00 Article number: BC2235502100.01 Technical data: • Brand: Brian James • Model: Connect 476 • Vehicle type: Flatbed trailer • Vehicle condition: New • First registration: No first registration • TÜV/HU: 2 years from first registration • Internal dimensions (L x W x H): 500 x 213 x 0 cm • External dimensions (L x W x H): 665 x 215 x 80 cm • Loading height of the floor: 65 cm • Permissible total weight: 3,500 kg • Tare weight: 805 kg • Payload: 2,695 kg • Chassis: Flatbed trailer (wheels under the body) • Tires: 195/60R12C • Suspension: ALKO rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Most adaptable multi-functional trailer for commercial goods and vehicle transport of all types. • Every available option can be flexibly installed or removed, enabling needs-based customization for almost any application. • Perforated steel lashing floor in combination with an 18 mm multiplex floor provides high slip resistance and is extremely wear-resistant, even under the harshest operating conditions. • Option to insert accessories at all 4 corners for sideboards, tarpaulin frames, sideboard extensions, or front wall extensions. • Vehicle also designed for all options after purchase: enormous potential for retrofitting: hydraulic tilting functions, winches, ramps, etc. can be retrofitted at any time. • Very stable steel frame, welded. • Docking edge for ramps is adjustable for different track widths. • Numerous lashing points directly stamped into the frame enable professional load securing. • Integrated ramp compartments for easy retrofitting of ramps. • Side panel color: black • Frame completely hot-dip galvanized. • Sturdy net hooks under the loading area. • Spare wheel easily accessible, mounted on the drawbar. • Reversing automatic. • ALKO overrun device and parking brake. • Steel cast coupling head with integrated high-security lock ALKO. • Very stable V-shaped drawbar, REINFORCED. • 13-pole plug. • Reversing lights. • Large-sized LED safety lighting. • Complete LED lighting: Extremely bright, durable and reliable. • Dynamic LED turn signals are clearly visible even in bad weather. • Robust protection of the rear lights. • Integrated rear fog light. • Various marker lights front, side and rear. • Heavy-duty support wheel. • 5-year chassis warranty. _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any special requirements! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance, or transfer license plates (Germany) can be provided. - Export license plates incl. customs declaration possible. Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 Nedezy Aw Nepfx Aatjwn 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1235/1250P, cutting width (max.): 1,250 mm, working width: 1,250 mm, input current: 64 A, paper height (min.): 1 mm, paper height (max.): 10 mm, label length: 250 mm, working length: 1,235 mm, production capacity: 300 unit/h, STOCK LM 1235/1250P LAMINATION MACHINE | 1250 MM | GERMAN MADE For sale: STOCK LM 1235/1250P lamination machine manufactured by the German company Stock Maschinenbau GmbH. This machine is designed for laminating corrugated and solid cardboard with decorative paper, labels, and printed sheets, enabling the production of aesthetically pleasing packaging, promotional boxes, and display materials. Njdpjzd Dwljfx Aatjwn The machine is equipped with an automatic gluing system, a label positioning system, and a pressure roller that ensures high-quality material bonding. Its robust German construction guarantees stable operation and low operating costs. Key advantages: • Working width of 1250 mm • Ability to laminate XL sheets up to 1620 x 1210 mm • Smooth speed adjustment • Smooth adjustment of the feed table movement • Automatic glue feeding and replenishment • Glue level sensor • Easy and quick adjustment of operating parameters • Central lubrication system • Pneumatic clutch • Cycle counter • Safety system: safety bar and scrapers Equipment: • Semi-automatic label feeder • Table for manual feeding of plano sheets • Manual feeding of corrugated cardboard or die-cuts • Gluing unit with automatic glue feeding • Sensor for detecting and registering labels • System for positioning and applying cardboard • Pressure roller • Receiving table for stacking finished parts • Central frame for mounting die-cuts Technical data: • Manufacturer: Stock Maschinenbau GmbH (Germany) • Model: LM 1235/1250P • Year of manufacture: 1995 • Maximum working width: 1250 mm • Size of laminated sheets: up to 1620 x 1210 mm (length virtually unlimited) • Thickness of laminated materials: 0.8 - 10 mm • Performance: approximately 300 cycles/h • Power supply: 380 V / 50 Hz • Power: 18 kW • Power socket: 64 A • Machine dimensions: 6720 x 1910 x 1580 mm This machine represents an economical solution for companies seeking an efficient and reliable laminator for the production of premium packaging. The German construction guarantees durability, stable operation, and ease of use.

Condition: new, Year of construction: 2026, PLC-controlled, compact slitting and cross-cutting line for thin sheet metal, designed for industrial cutting, and boasting very high quality. PLC control with touchscreen – the quantity and section length are programmed. Maximum sheet width: 1,250 mm Cutting performance for sheet thicknesses ranging from 0.5 mm to 1.2 mm, using SJ235JR steel sheet with a tensile strength of 360 N/mm², with three sets of slitting knife pairs. The slitting unit is an autonomous module. For quick adjustment of the rotary knife pairs, the slitting unit can be easily pulled out or pushed in. Alignment unit with eight hardened and ground alignment rollers. Adjustment of the lower alignment rollers is motorized. Rubber-coated feed rollers – this allows for the processing of coated sheets as well. Slitting shear with 3 to 5 knife pairs. Smallest strip width: 200 mm Maximum cutting speed: 20 m/min Very fast, mechanically guided cross-cutting shear for absolutely clean, burr-free cuts. Voltage: 3 x 400 volts – fuse rating: 25 amps – total drive power: 5 kW Dimensions, excluding the outfeed table, approximately 3 m x 1.9 m x H 1.8 m Njdsz Ei D Rjpfx Aatjwn Weight, approximately 2,800 kg

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,867 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,350 mm, fork length: 1,200 mm, drive type: Diesel, Sideloader Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Nwodpfszgyv Asx Aaten

Condition: new, Year of construction: 2026, Weight 870 kg Motor output 15 kW Nwjdpfxoyk H Tko Aatsn 12,500 m³/h

Condition: used, Westtech Woodcracker G1250 Root Rake Nwedsyfquzspfx Aaton - New equipment In stock - Working width: 1250 mm - Own weight approx. 1420 kg - Hydraulic flow rate: 50-90 l/min - Operating pressure: 200-250 bar - Carrier vehicle: approx. 15-22 tons - 2x hydraulic grapple arms - Optional: fine rake Many adapter plates available on request. We are an official sales and service partner for Westtech Woodcracker, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We offer the complete Westtech Woodcracker range for you! Rental available = More information = New: Yes Contact Tobias Ebert for further details.

Condition: excellent (used), Year of construction: 1997, Romanian Lathe SARO SPS 1250x9000, Manufacturer: Saro Targoviste, Year of Manufacture: 1997. Chuck diameter: 1250 mm, Maximum swing over bed: 1250 mm, Spindle diameter: 250 mm, Distance between centers: 9000 mm, Maximum swing over slide: 920 mm, Maximum workpiece weight between centers: 15,000 kg. Grinding attachment available! Video of the machine under power available. Weight approximately 25 tons. Nwodpfxey Icbao Aatsn

Condition: ready for operation (used), Indramat MAC090A-0-ZD-1-B/110-A-1/DI1250 three-phase servomotor SN: 50388R1, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as shown in the photos. Nodsy Npfbopfx Aatjwn

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2109, pressure: 12 bar, power: 814 kW (1,106.73 HP), temperature: 192 °C, Fire-tube steam boiler HKB SHP 1250, 1250 kg steam/hour, 12 bar certified pressure, 814 kW. The listed price is for the boiler in its current condition, but we can offer various additional services. Nodpfxoyu Ikxs Aatswn Such as: New insulation, control cabinet, overhaul and pressure test, burner and devices, installation, etc.

Condition: good (used), Linear drive, linear gearbox, lifting gearbox, spindle drive, pneumatic drive, slide, guide, electromechanical linear axis, mini slide, mini slide -Manufacturer: Festo: Mini slide type DGSL-12-50-Y3A 543979 Nsdpfjxw Tc Rjx Aatown -Stroke: 50 mm -Number: 15 sleds available -Price: per piece -Dimensions: 185/60/H45 mm -Weight: 0.9 kg/pc.

Year of construction: 2021, condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by telephone). Westtech Woodcracker G1250 Root Rake / incl. grab arms / in stock & available immediately / Year of manufacture: 2021 Price: €14,890.00 net / €17,719.10 gross - Working width (mm): 1,250 - Own weight (kg): 1,420 - Recommended oil flow (l/min): 50 – 90 - Recommended operating pressure (bar): 200 – 250 Nsdpfx Aajyix Iqetjwn - Carrier vehicle operating weight (t): 15 – 22 Equipment: - Incl. grab arms Optional: Volvo S60 adapter plate incl. bolts and installation = €1,500.00 net Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and available immediately. We have a wide selection of various Westtech products in stock and available immediately! Mr. Herden (Tel.) will be happy to assist you. On request, we are also happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Subject to errors and prior sale! Internal no.: 621068 = More information = New: No Intended use: Construction Unladen weight: 1,420 kg Contact Marius Herden for more information.

Condition: good (used), Year of construction: 1995, Lifting system, Kardex, tray size: 1250x825mm, 7m high – used - : Price ex location: €13,950 (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Bellheimer / Kardex Type: Shuttle 1250x825x10000 Device number: 95.008812/001 Year of manufacture: 1995 Tray size: 1250x825mm Device height: approx. 7m Depth: approx. 2.70m Width: approx. 1.6m Number of trays: 44 units Permissible total payload: 2x10,000kg Permissible shelf load: 250kg 3x400V, Current: 3x5.2, Power: 3.6 kW Condition: used Nwodpfxsyrqvfe Aaton Available: from approx. week 13/2026 Location: Speyer

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: KHT, Steel / Stocker indoor crane, gantry crane, bridge crane, including steel structure + floor control Steel structure dimensions approx. length 15m x 9.5m width with 1 bridge crane 12500kg, lifting height 6m Payload/lifting capacity 12.5t System technical data: Crane runway/steel structure consisting of HEA/HEB180 girders, HEB240 guide rails Length of outer edge of steel structure approx. 15m Total width of outer edge (steel structure) approx. 9.53m Total crane height approx. 4.52m Top of guide rails approx. 3.99m Bottom of guide rails approx. 3.87m Top of bridge approx. 4.52m Bottom of bridge approx. 4.13m Hook height approx. 3.4m Track gauge approx. 6.23m Support spacing: left (2.65 + 4.44 + 4 + 3.5 m), right (4.6 + 4.9 + 4.9 m) System is delivered complete: Steel structure complete with conductor rail 1x bridge including travel drives 1x 12500 kg steel wire rope hoist SH 5032-25 4/1 1Am M4 lifting speed 1/6.3 m/min Njdpfowgwrqsx Aatown Crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or pickup by appointment only

Condition: used, functionality: fully functional, total height: 6,300 mm, total width: 1,580 mm, total length: 2,680 mm, load capacity per storage section: 250 kg, input voltage: 415 V, warranty duration: 12 months, Equipment: documentation/manual, safety light barrier, KARDEX SHUTTLE 250 - 1250X825-NT GREY IN COLOUR 45 TRAYS TRAY DIMENSIONS 1250MM X 825MM AUTOMATIC HEIGHT ADJUSTMENT FOR TRAYS WHEN ENTERING MACHINE 12 MONTHS WARRANTY SERVICE & MAINTENANCE CONTRACTS AVAILABLE THESE MACHINES ARE MODULA AND CAN THEREFORE BE REDUCED IN HEIGHT TO FIT INTO ANY HEIGHT RESTRICTIONS Nedpfxowtqz Ej Aatjwn

Year of construction: 1980, condition: used, Max. tensile force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 27 m/min Max. workpiece diameter: 320 mm Number of units: 3 Nwsdpscdtplefx Aaten Weight: 4.8 tons Automatic tool feeder Hydraulic draw-in head and end piece holder locking system Automatic feeding device for workpiece diameters up to 100 mm Magnetic belt chip conveyor

Year of construction: 2026, condition: new, The Round Elbow Machine is designed for quick assembly of air ducts, namely segments of Njdeg S N Niopfx Aatjwn bends, transitions, and plugs. High quality hydraulic components have been used. Flanging and assembly operations are carried out at 2 independent workstations, and it allows two people work at the same time. T wisting and printing balls high abrasion resistance and toughness with high durability and compressive strength is 2379 cold work tool steel. Technical Data: Diameter Range-125-1250mm Sheet Metal Thickness-0,5-1,5mm Roll forming Options-5-7,5-10mm 3 Set Power-4 kw Electricity-380V/3PH/50 HZ & 240V/3PH/60 HZ Air Pressure-6-8 bar Hydraulic Oil Level-90 lt Processed Sheet Metal Thickness (Coated)-0,5-1,5 Machine Dimensions-750(width)x900(height)x2800(length) Machine Weight-850 kg

Condition: ready for operation (used), OGIHARA MGH109A3 pump, 91-25077, 100V, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Nsdpolcf N Nofx Aatjwn

Year of construction: 2023, condition: excellent (used), Industrial Plankton PBR 1250L – Turnkey Photobioreactor for Microalgae Cultivation Complete, ready-to-run closed photobioreactor for cultivating microalgae (e.g. Nannochloropsis, Spirulina, Chlorella, Isochrysis, Tetraselmis, Haematococcus and more). Manufactured by Industrial Plankton Inc. (Canada). In service since spring 2023, well-maintained and fully operational. Offered as a complete turnkey package. Built around a custom 1250 L high-surface-area vessel (1200 L working volume) with algal-spectrum LED lighting and a touchscreen PLC that automates light, pH, CO2, temperature, nutrient dosing and harvesting – with remote access. Nedpfxozluy Hs Aatown Highlights: Easy to run and keep clean: touchscreen automation + integrated clean-in-place (CIP), no manual scrubbing Compact footprint: full 1250 L capacity in a compact vertical unit (working area approx. 3.05 x 2.44 m) Strong, controllable growth performance for high-density cultivation Continuous production approx. 200-500 L/day; 100-300 g biomass/day (AFDW) at 0.3-1.2 g/L Broad strain range (freshwater & marine) Key specifications: Total / working volume: 1250 L / 1200 L LED lighting: algal-spectrum, 2160 W Control: touchscreen HMI + PLC, real-time density sensor, remote access pH / CO2: probe & transmitter, automated CO2 dosing valve & regulator Temperature: heat exchanger, 5000 BTU chiller, 300 W heater Nutrient dosing: 3 pumps (1 mL/s), 2 filters (0.2 um) Flow/harvest: 0.1 um water filter, in-tank volume sensor, harvest pump (6 L/min) Header tank: 250 L with UV filter, ultrafilter & supply pump Power: approx. 3160 W avg / 4170 W max; 110-120 / 220-240 V, 50/60 Hz Operational weight: approx. 2130 kg Condition: good working order, well-maintained. CO2 cylinder not included. Exact scope confirmed on inspection. Location: Lahti, Finland (EU). Inspection and live demonstration by appointment. As part of the sale we are happy to advise the new owner on the best starting species and share reference data to get running. Full illustrated PDF spec sheet available on request.

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: TD-RR, Altmann Cleanroom Crane + Steel Construction - Gantry Crane, Portal Crane, Crane System, Crane Runway, Hall Crane Altmann GmbH TYPE: ELP1.25-2.800E_RR Approximate dimensions L x W x H: 6.75 x 2.5 x 3.5 m Nwsdpfxjzdbzio Aatjn 1 gantry crane with a load capacity of 1250 kg and wire rope hoist (controlled by radio and frequency inverter) The system is delivered complete: Steel structure/crane runway, free-standing + power supply 1 gantry crane, 1250 kg load capacity, incl. wire rope hoist Cover for the lifting mechanism is missing The crane is disassembled and immediately available The item is located in 75053 Gondelsheim Very good condition, see pictures Shipping via freight forwarder or collection only by prior arrangement.