Used Zippo 1250 for sale (1,645)

Condition: used, Multiplex boards used length 1680 mm width 1250 mm Pgsdsl Uvxnepfx Ab Uji board thickness 45 mm weight 68,5 kg in the pallets there are 9 holes with diameter 12 mm several presentseveral present

Condition: excellent (used), Year of construction: 2011, WEISHAUPT WM-G10/A-4; With gas train - Power: 110-1250 kW Podpfx Abjwgym Do Uegi - Year of manufacture: 2011 - Design: ZM

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Pgedswwar Ijpfx Ab Uji Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: good (used), Workbench, work table, assembly bench, assembly table, work table -Manufacturer: Lista, workbench with vise / solid construction with drawers -Worktop: approx. 1250/700/H850 mm -Drawers/Cabinet door: lockable, without key / Layout/height see photos Podpfx Abjxzzmre Uogi -Vice: Heuer Front, height-adjustable and rotatable -Clamping jaws: 180 x 30 mm, clamping range 230 mm -Transport dimensions: 1250/960/H1140 mm -Weight: 138 kg

Condition: ready for operation (used), Vibrating Chute Haver & Böcker Brand: Haver & Böcker Length 1750 mm - width 1250 mm with two pieces vibration motors of each 1,4 kW Incl.: springs Pgjdpfjywmiasx Ab Uji

Condition: used, Year of construction: 2012, operating hours: 20,000 h, machine/vehicle number: IntNr231536, High-end CNC turning centre with 2 turrets, 2 Y-axes and IRCO bar feeder Control: SIEMENS 840D SolutionLine with ShopTurn interface Year of manufacture: 2012 Spindle hours: 20,000 Pedpoyxpz Iefx Ab Usgi Maximum turning diameter: approx. 390 mm Maximum turning length: 1,250 mm Bar capacity: 76 mm (standard) X-axis travel: 300 mm Z-axis travel: 1,250 mm Y-axis travel: +/- 60 mm (both turrets) Spindle specifications: Speed: up to 5,000 rpm Drive power: 34 kW (40% duty cycle) Torque: up to 380 Nm 4-axis kinematics 2 x 12-position turrets (all stations suitable for driven tools) Speed up to 6,000 rpm, power 11.3 kW Gear cutting software, including specialised tool holders for gear hobbing/cutting. IRCO MUK short bar loader Hinged belt chip conveyor 20 bar high-pressure coolant system with paper belt filter Subject to prior sale. Specifications subject to change and errors excepted!

Condition: good (used), Year of construction: 2008, Machine is in good working condition. Pjdoyviqdjpfx Ab Uogi Parts shown by hand not come.

Condition: good (used), Year of construction: 2010, Machine is in good condition. Parts shown by hand not come. Pjdpox N Atfjfx Ab Ujgi

Condition: good (used), Year of construction: 2010, AWEA 1250, 15.000 rpm coolant thru spindle, Tool changer 40 places Parts shown by hand not come. Machine vices, plate on table not come with machine. Pgsdsxu Ew Uepfx Ab Uji

Condition: used, twin shaft paddle mixer mixer capacity 1.250 L. 200 mm – head with tool trolley all stainless steel Podpfsyvzirox Ab Ujgi dimensions mixer (l x w x h) : ± 2.350 x 2.000 x 2.600 mm loading height : 2.200mm pneumatic lid

Condition: good (used), max. ram stroke 230 mm Pgedpfx Asw Ny S Rjb Uji throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Year of manufacture: unknown

Year of construction: 1970, condition: used, machine/vehicle number: 12901, drilling capacity steel/GG: 50/60 mm spindle taper: 5 MK Podpfx Asy R Thjb Uegi arm length: 400 mm table size: 700 x 600 mm spindle sleeve stroke: 275 mm spindle turning speed range: 32 - 1030 rpm carriages: 4: 0,1 - 0,4 mm engine: 380 V, 2,2/3,7 kW space needed: 700 x 1200 x 2700 mm weight: 1240 kg

Year of construction: 1956, condition: used, machine/vehicle number: 23689, Air Output: 785 l/min Pressure: 10 bar Pgsds E E Dgepfx Ab Uei Motor: 11 kW

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Pjdpfx Absx I Sh Ae Usgi Subject to prior sale!

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard Pgedpfx Aofirwmob Uoi electrical equipment according to worldwide standard Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports _____ With over 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced manufacturing facilities

Condition: excellent (used), Year of construction: 1993, spindle bore: 118 mm, turning diameter over bed slide: 635 mm, turning diameter over top slide: 390 mm, turning length: 2,000 mm, total length: 4,170 mm, total width: 1,960 mm, total height: 1,800 mm, spindle speed (max.): 1,250 rpm, swing diameter over cross slide: 390 mm, bed width: 480 mm, overall weight: 5,200 kg, Centre lathe Colchester 600 - MAGNUM 1250 MACH-ID 9464 Make: Colchester 600 Type: MAGNUM 1250 Year: 1993 FAGOR 2 Axis Dro Feed all directions Conical turning attachment DBC Turning Length: 2000mm Swing over bed Ø: 635mm Swing over cross slide Ø:390mm Swing in the gap Ø: 900mm Gap length: 300mm Spindle bore: 118mm Spindle power: 22kW Bed width: 480mm Tailstock spindle Ø: 95Ø Stroke pinole: 190mm Spindle taper: 6Mk Speeds / ranges: 1250Rpm Length: 4170mm Podpfsyuwwhox Ab Ujgi Width: 1960mm Height: 1800mm Weight: 5200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness steel (max.): 1 mm, number of blades: 5, working width: 1,250 mm, number of feed rollers: 2, FORSTNER MST 1250 Longitudinal Slitting and Sheet Cutting Machine The machine is in very good condition and fully operational. Designed for longitudinal slitting and cutting into sheets. It is currently connected - can be tested on site. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to mount up to 7 pairs. Control – Siemens SIMATIC touchscreen panel. Full documentation (PDF) included. Specifications: Model: FORSTNER MST 1250 Made in: Austria Year: 2010 Working width: 1250 mm Thickness: up to 1.0 mm Slitting knives: 5 pairs Shearing: circular shears Controller: Siemens SIMATIC panel Psdpfx Aex R Sk Nsb Usgi If you have any further questions, we will be happy to answer.

Condition: used, mileage: 361,000 km, power: 207 kW (281.44 HP), first registration: 12/2018, fuel type: diesel, empty load weight: 9,280 kg, maximum load weight: 8,645 kg, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, central locking, compressed air brake, cruise control, differential lock, onboard computer, truck registration, Iveco Eurocargo 4x2 refrigerated box, Carrier Supra 1250, Euro 6 | BÄR tail lift 1500 kg | Leaf-air suspension | Trailer hitch | Multifunction steering wheel, air conditioning, auxiliary heater | Cruise control, radio/CD | Load area dimensions L: 7.50 m, W: 2.45 m, H: 2.30 m | Subject to errors, input mistakes, and prior sale. Pgsdpfsywyxzex Ab Uoi

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, press force: max. 1.250 to. Pedpewuutbjfx Ab Uegi daylight: max. 480 mm width: 585 mm stroke: max. 355 mm weight: 9.000 Kg.

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened Psdpfx Abowv Uvfs Uegi -Turning length: 1260 mm -Turning diameter over bed: 470 mm -Spindle diameter without bridge bed: 600 mm -Turning diameter over support: 280 mm -Spindle bore: Ø 55 mm Spindle speeds: 36 - 2000 rpm -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg

Condition: good (used), mileage: 400,681 km, power: 243 kW (330.39 HP), first registration: 08/2016, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, loading space length: 8,620 mm, loading space width: 2,460 mm, loading space height: 2,430 mm, Year of construction: 2016, Equipment: AdBlue, tail-lift, Volvo FM 330 4x2 - Carrier Supra 1250 MT - Tail lift - Full air suspension Year of manufacture: 17-8-2016 Mileage: 400,681 km VIN: YV2X9J0A1GA792544 Box dimensions: 862 - 246 - 243 cm Carrier Supra 1250 MT Tail lift Full air suspension = Further Information = Pgjdpeyxdkdjfx Ab Uoi Suspension: Air suspension Front axle: Steered Rear axle: Twin tyres Gross vehicle weight: 18,000 kg Tail lift: Rear tailgate Cooling range: -20 °C to +20 °C Cooling engine: Diesel Technical condition: Good Visual condition: Good

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 10900 € 209.28 € 1250 kg 1300 mm 450 - 550 mm Podpfx Aswv H Awsb Uogi 400 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control WITH PNEUMATIC DOWNHOLER

Year of construction: 2016, condition: used, Cooling unit Frigo Carrier Supra 1250Mt Year of manufacture: 2016 Complete with condensers and 8-meter cooling unit. Cevoman bv. Lenskensdijk 5 Podpfeywk A Rex Ab Ujgi 2200 Herentals Belgium

Condition: good (used), Year of construction: 2014, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 2.020 kg Functional Mast: articulated arm Lifting capacity: 450 kg Working height: 4.010 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 14,6x2,5x3,05 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 1250AJP Year of build: 2014 Condition: Used Data: Max. working height: 40,10 m Platform height: 38,10 m Max. reach: 20,25 m Platform lifting capacity: 450 kg Platform dimensions LxW: 2,44 x 0,92 m Swivel range: endlos Max. climbing capacity: 45% Total dimensions LxWxH: 14,60 x 2,50 x 3,05 m Movable up to working height: 40,10 m Wheel pressure max.: 130 kN Ground clearance: 0,26 m Drive type: Diesel Own weight: 20.020 kg Special features: Rotatable work basket, basket arm/rotation angle 130°, all-wheel drive, pendulum axle, built-in generator for 230V, socket in the basket. Location: 41468 Neuss: immediately available Pedpfoxcuq Tox Ab Ujgi

Condition: ready for operation (used), The WS 1250 CNC gear shaping machine features a configuration comparable to the Lorenz LS 1000 or LS 1250 models, is designed as a universal machine, and is employed by manufacturers of gears and transmission technologies for the process of gear shaping. Technical Data Diameter: 1250 mm Pgodpfeyw Hxnsx Ab Uji Module: 12 mm Face width: 210 mm Dimensions: 3,750 x 2,500 x 3,600 mm Machine weight: approx. 19,000 kg *All details and data are non-binding. Subject to prior sale. Special Features: The machine is equipped with a digital CNC control by Siemens type 840 D, as well as digital servo motors and drive amplifiers. The control cabinet is air-conditioned. Sinumerik 840 D: PCU 50, 566 MHz, 256 MB RAM, NCU 572.4, 3-axis/spindle, NC memory 2.5 MB, PLC memory 96 KB, 19” flat operating panel OP 10 C, 10.4” flat screen, electronic handwheel for linear axes, diagnostic system for error messages, warnings, and informational texts.