Perfect binder

Mueller Martini Prinzbinder 1296

Condition: used, The GMP PROTOPIC II - 540 Laminator, serial number XK54S30033, is a professional laminating system designed for high-quality finishing applications. With a working width of 540 mm, it accommodates paper sizes up to 540 x 800 mm and as small as 210 x 200 mm, making it versatile for a wide range of production needs. Suitable for paper thicknesses from 120 to 350 g/qm2, the machine ensures consistent lamination results across different substrates. Iodpfx Ajxb Dn Ssgzotr Currently located in a printshop in Germany, the unit is in good condition without any damage, reflecting careful use and maintenance. Compact, reliable, and efficient, the GMP PROTOPIC II - 540 Laminator is a practical solution for professional print finishing environments requiring durable and precise lamination. Format: 540 mm Equipment: Good condition without any damage Maximum paper size 540 x 800 mm Minimum paper format 210 x 200 mm Paper thicknesses from 120 to 350 g/qm2

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Isdpfx Agoh Nrh Uozstr Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: good (used), Size max 510 x 305 x 60 mm Size min 140 x 100 x 3 mm Cover size max 642 mm Cover size min 203 mm Speed max 12.000 c/h Equipment gathering machine Iedsd R Ecpopfx Agzjtr • 18 stations • 18 feeders 3661-210 SF intermediate elements • spiral race away • jogging element perfect binder • 25 clamps • clamp pitch 24" • milling and roughening station • hot melt spine gluing unit • hot melt side gluing unit • premelter • SF stream cover feeder • SF cover nipping and pressing station • lay down device

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Iedpjwzvzmofx Agzotr

Condition: used, Used C.P. Bourg BB3002 Single-Clamp Perfect Binder / EVA The C.P. Bourg BB3002 is a professional perfect binder for producing softcover books and brochures. This robust and reliable model is ideal for medium to large print runs in printing and binding shops. Key features: - Uses EVA hot melt adhesive for strong and durable binding - Cover feeder station for automatic cover feeding - Precise milling unit for optimal glue penetration - Glue application system with side gluing for increased stability - Touchscreen control panel for easy setup and operation - Memory function for up to 50 recurring jobs - Automatic format adjustment for quick changeovers - Integrated cooling section for fast curing Technical specifications: - Production speed: Up to 600 books/hour - Book block thickness: 1 - 60 mm - Book format: max. 320 x 380 mm, min. 100 x 100 mm - Cover weight: 80 - 300 g/m² - Cover magazine capacity: 80 mm - Book block paper: 60 - 160 g/m² - Milling depth adjustable between 0 and 3 mm - Glue type: EVA hot melt - Glue temperature: Adjustable from 130°C to 180°C - Electrical connection: 400V, 3 phases, 50 Hz - Compressed air connection: 6 bar - Dimensions (L x W x H): 2950 x 1135 x 1370 mm Iodpfou Srpgex Agzotr - Weight: approx. 1100 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, machine/vehicle number: 932639 A690, Format trimmed 510x320 mm min 158x110 mm Format trimmed max 500x315 mm Iodpsbg Hnhsfx Agzstr min 148x105 mm Power max 14000 c/h min 2000 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate Itjdewypp Ispfx Agzor - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, mileage: 229,235 km, power: 96 kW (130.52 HP), first registration: 11/2018, fuel type: diesel, empty load weight: 2,585 kg, maximum load weight: 1,086 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, energy efficiency: D, CO₂ emissions: 187 g/km, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.1 l/100km, fuel consumption (combined): 7.8 l/100km, brakes: other, color: white, driver cabin: other, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 2,060 mm, total width: 2,470 mm, loading space length: 3,400 mm, loading space width: 1,770 mm, loading space height: 1,958 mm, Equipment: air conditioning, airbag, cabin, * Engine damage / engine defective * Condition as per photos * Maxi high roof + extra long * 270° rear double doors * Internal dimensions: 3,400 mm x 1,770 mm x 1,980 mm * Wooden floor * Side walls lined with wood and equipped with lashing rails * DIN-compliant lashing rings * Cab with 3 seats * Air conditioning * 6-speed manual transmission * Comfort driver’s seat * Heated seat * Airbag * Electric windows * Electrically adjustable, heated mirrors * Wheelbase: 3,700 mm Isdpfjwc U Afjx Agzjtr * Gross vehicle weight: 3,500 kg * Unladen weight: 2,585 kg * Payload: 915 kg If you require a new TÜV inspection, we are happy to provide you with a quote from our partner workshops. Our offer generally comes WITHOUT a new TÜV inspection, DGUV, SP, or UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and highly recommend an inspection and examination of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect details in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Year of construction: 1963, condition: used, functionality: limited functionality, machine/vehicle number: 512804, 1963 Bobst SP900E with double action stripper in reasonable/good condition. Well-maintained.. in recent years for example sprocket wheels, main gripper chains, counterplate under cuttingplate, cardan joints to the feeding head, have been renewed (original Bobst parts) Gripperbars have not been renewed recently, they are still in quite a good condition. The knee joints have almost no signs of wear. they were probably at some point and the machine has not been used much since then. There is hardly any screech on them. Itsdpetyqizofx Agzer Machine is dismantled in our storage in the South of The Netherlands, dismantled and not under power. For seriously interested potential buyers we will further upgrade the machine and assemble it and give the possibility to test it inevery way they want. In that case price will be 22,000 euros, loaded on to your transport, EX SITE

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Year of production: 2005 Manufacturer: GUK-Falzmaschinen Griesser & Kunzmann GmbH & Co. KG Machine availability – on request; Machine in use; possibility to carry out work tests during inspections; Good technical condition; Folding machine manufactured by the renowned German company GUK equipped with a high pile feeder (sheet picking with a suction roller from above) FL2-50, 2 folding pockets aggregates, pocket with maximum working widths of 50 cm and mobile chute delivery. Folding machine GUK model FA 50/6-6 FL2-50 – infeed width 500 mm (6+6 folding pockets). Maximum input format: 500 x 850 mm Minimum input format: 105 x 145 mm Minimum folding length: Itodpforx S Iwjx Agzsr 45 mm Feed rate of sheets from feeder: 40 - 180 m/min Maximum performance: 27.000/from sheet A4 Power supply: 400 V/50 Hz Machine equipment: High pile feeder FL2-50; Batch counter. Multifunction counter programming the operation of the machine. Ability to fold sheets in groups (lots) of the given number in each lot, with stepless adjustment of the spacing between parties. I. folding unit FA 50/6, 6 folding pockets; Sound reduction hood, top. II. folding unit FA 50/6, 6 folding pockets Sound reduction hood, top. Mobile chute delivery S 520. To be added after I or II folding station.