Glass transport trolley

Multitec GmbH TL 140 S2

Condition: good (used), Year of construction: 1997, Load capacity: 2200 kg. Max. loading height: 1600 mm. Lasdpex Hqn Ssfx Agzok Available: 10 pieces. External dimensions: Width: 1800 mm. Height: 2020 mm. Depth: 900 mm. Weight: 130 kg. Condition: good, second-hand.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, tempering furnace reconditioned 2022 Lodpfxewinuhe Agzsak

Condition: used, mileage: 117,500 km, power: 355 kW (482.67 HP), first registration: 06/2020, fuel type: diesel, tire size: 385/65 R22.5, axle configuration: 6x2, wheelbase: 5,300 mm, fuel: diesel, fuel tank capacity: 620 l, color: orange, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, total length: 9,100 mm, total width: 2,550 mm, Year of construction: 2020, DAF CF 480 FAN WITH CRANE FASSI F235 A.2.23 E-DYNAMIC + TAM T20SN56100 + WEIGHING SYSTEM Suitable for containers from 380 cm up to 620 cm and up to 700 cm with the extendable bumper. Wheelbase according to COC: 670 cm Axle 1-2: 530 cm Axle 2-3: 140 cm FASSI F235A.2.23 E-DYNAMIC Crane + TAM T20 SN 5.600 Hooklift system Slewing moment: 17.13 t/m Ledpfx Agovivt Hjzsak Maximum crane outreach: 10.5 m Slewing range: 400° Torque rating: 30.8 kNm Hydraulic tank: 120 liters Weight of the crane in standard version, without oil and components: 2,630 kg Photos may differ from the actual condition. Vehicle has been properly maintained at all times. = More information = Transmission: TRAXON, 12-speed, automatic Front axle: Tire size: 385/65 R22.5; Max axle load: 9,000 kg; Steering; Left tire tread: 50%; Right tire tread: 50%; Suspension: parabolic springs Rear axle 1: Tire size: 315/80 R22.5; Twin tires; Max axle load: 12,000 kg; Inner left tire tread: 50%; Outer left tire tread: 50%; Inner right tire tread: 50%; Outer right tire tread: 50%; Suspension: air suspension Rear axle 2: Tire size: 385/65 R22.5; Lifting axle; Max axle load: 7,400 kg; Steering; Left tire tread: 50%; Right tire tread: 50%; Suspension: air suspension Body builder: TAM T20SN56100 Pump: Yes Price: On request Registration number: CKR08

Condition: used, functionality: fully functional, Year of construction: 2014, 1600 mm open top vertical glass wasching+ drying machine glass thiknss : 3 - 19 mm Laedpfx Agjwwivpozek inlet conveyor : 2 m outlet conveyor : 2 m total lenght : 6 m total power : 9 Kw Machine fully fonctional in very good condtion

Condition: new, LIFTING EQUIPMENT FROM 5 - 10t WEIGHT TRANSPORT TROLLEYS FROM 5 - 30t WEIGHT Lsdpfxoi Akpde Agzsak A LOT OF VARIETY NEW IN STOCK

Condition: used, Year of construction: 2011, functionality: fully functional, working height: 2,000 mm, Lisec FPS-25/20U2 2011 Lisec gas press 2000 x 2500 mm Laodpfxovy Ef Hj Agzok Right-Left S-IGL-1892

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Lasdpfswikn Rex Agzjk Gas filling press: Models and triple available

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. Lasdpfxjr Ak Exe Agzek There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 400 h, Automatic cutting line automatic loader 7000 mm cut-off saw with 650 mm blade electronic tilt left/right automatic unloader 3500 mm waste conveyor belt Ledpfx Ajxv Evtegzsak labelling machine

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 942, total length: 9,170 mm, total width: 1,635 mm, total height: 3,100 mm, overall weight: 4,140 kg, input current: 44 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, power: 21 kW (28.55 HP), workpiece weight (max.): 800 kg, pressure: 7 bar, Lattuada TL10 AV C straight line edger mitring 0-45°, cerium. Refurbished at our warehouse in Belgium. Tested and ready to go. Ledsw U Nzrjpfx Agzeak