Punch nibbling machine

Muratec

Condition: excellent (used), functionality: fully functional, • Muratec MT 25 MYY / Gantry Loader / Bar Loader. • Two C-axes. • Two Y-axes. • Highly automated machine. • 8 kg gantry loader robot system for part loading and unloading. • 1.5-meter CNC bar feeder. • Machine with 9 controlled axes. Hodpfxezl Rflj Ac Tjr • Two twin spindles. • Two turrets. • Turrets with 15 positions each, all motorized. • Integrated spindle motor: 15 kW. • Motor starting torque: 420 N·m. • Motorized tool drive: 4 kW. • Spindle nose: A2-6. • Maximum turning diameter: 370 mm. • Maximum turning length: 920 mm. • Bar capacity: 67 mm. • Prismatic guides on all axes. • Two Kitagawa 250 mm hydraulic chucks per spindle. • Separate compartment for the inspection of machined parts. • Automatic finished-part pickup arm for small parts. • Automatic secondary spindle cleaning with air or coolant. • Conveyor belt for finished parts. • Automatic load monitoring and tool wear detection. • Automatic inter-spindle part transfer system with torque control. • Fanuc CNC. • Fanuc motors, servos, electronics, and controls. • Rapid traverse speeds: 20 and 25 m/min. • Main spindle speed: 3,500 rpm. • Motorized tool speed: 3,000 rpm. • Turret indexing time: 0.2 seconds. • Rear-mounted, hinged chip conveyor. • Complete set of static tool holders for external and internal machining included. • Complete set of motor-driven axial and radial tool holders included. • Machine currently in operation. • Weight: 10,800 kg. • Immediate availability, unless previously sold.

Condition: used, Year of construction: 1983, grinding length 8400 mm grinding width 1450 mm workpiece height 1250 mm surface area 8000 x 1250 mm table height over floor 920 mm distance between columns 1470 mm workpiece weight max. 59700 kg weight of the machine ca. 59,7 t dimensions of the machine ca. 22 x 5 x 5 m Adjustment ranges: -Crossbeam, vertical 1250 mm -Grinding support, horizontal 3100 mm Adjustment speeds: -Machine table (X-axis) infinitely variable 1-45 m/min Table creep speed 5 m/min Hjdpfxsvr Hgvj Ac Tor -Grinding support, horizontal (Y-axis) Rapid traverse 3000 mm/min Feed, step 0.001-0.099 mm Feed rate, continuous 100-3000 mm/min Creep speed 18+1 mm/min Tip infeed 0.001-0.019 mm -Crossbeam (W-axis) Rapid traverse 410 mm/min Table drive: -Oil transmission, Type Iv4 -Cylinder-Ø 185 mm -Piston rod Ø 130 mm -Drive motor 22 kW

Condition: ready for operation (used), Year of construction: 2008, punching force: 25 t, sheet thickness (max.): 6 mm, overall weight: 12,000 kg, total width: 2,500 mm, total height: 2,250 mm, travel distance X-axis: 2,550 mm, travel distance Y-axis: 1,600 mm, product length (max.): 5,200 mm, CNC punch press manufactured in 2008. This Muratec Motorum 2548 features a punching force of 25 t and a maximum sheet thickness of 6.35 mm. It offers an impressive X-axis travel of 2550 mm and Y-axis travel of 1600 mm, accommodating sheets up to 1250 x 5000 mm with repositioning. If you are looking to get high-quality punching capabilities, consider the Muratec Motorum 2548 machine we have for sale. Contact us for further details. • Maximum sheet size without repositioning: 1250 x 2500 mm • Maximum sheet size with one reposition: 1250 x 5000 mm • Throat depth: 1340 mm • Feed clearance: 25 mm • Maximum sheet weight: 150 kg • Hit rate at 25 mm pitch: X 400 hpm / Y 300 hpm • Hit rate at 1 mm pitch: X 800 hpm / Y 700 hpm • Simultaneous axis speed: 125 m/min • Punching accuracy: ±0.1 mm Hsdpfjzhuvtex Ac Tor • Turret index speed: 40 rpm • Index tool speed: 180 rpm • Compressed air requirement: 100 NL/min • Compressed air pressure: 0.5 MPa • Power supply: 23 kVA • Turret / Tooling: • Turret: 44 stations • Index stations: 3 x F A/I • Multi-tool: 1 x M/T, 12 stations • Tooling type: Wiedemann tooling • Optional turret configuration (catalogue): 44 stations / 4 index

Condition: good (used), Year of construction: 1999, 1 Muratec MT12 CNC lathe with dual spindle and dual turret Fanuc CNC control Hedpfxsy Ta Stj Ac Ter Year: 1999 Supplied with all tooling and tool holders.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Hsdewqb Scjpfx Ac Tor Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: excellent (used), Year of construction: 2000, 1 Muratec MT12 CNC lathe with dual spindle and dual turret 4 axes Supplied with all tooling and tool holders Year: 2000 1 BOSS 542 CNC indexing head Hedey Ta Nfopfx Ac Tor /32

Condition: good (used), Year of construction: 1999, 1 MURATEC MT12 CNC lathe Double-spindle, double-turret Year 1999 Hodpfx Asy Ta Sgoc Ter 1 STAUBLI RX90 robot with control center All tooling and tool holders included.

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Hsdpfjrfx Utjx Ac Tjr Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 17KX216770001, Technical Specifications: Work Area - Maximum turning diameter: 230 mm (120 mm with loader) - Maximum machining diameter: 200 mm - Maximum workpiece length: 145 mm (75 mm with loader) - X1/X2-axis travel: 130 mm / Rapid traverse in X: 24 m/min - Z1/Z2-axis travel: 145 mm / Rapid traverse in Z: 24 m/min - Y1/Y2-axis travel: ±40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis travel: X - Left 200 mm / Right 1600 mm; Y - 550 mm; Z - 155 mm; α 180˚ - Maximum feed rates (m/min): X - 160; Y - 120; Z - 35; α 180˚/1 sec - Load/unload gripper specs (pneumatic): Outer diameter Ø90 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle - Spindle size: Standard (6" / 8") / 165 mm / 205 mm - Maximum speed: Left & right 45–4500 rpm - Motor power (100% duty cycle): Left 15 kW / Right 7.5 kW Turret with Driven Tools - Tool interface: BMT55 - Number of stations: 12 (right), 12 (left) – turret with driven positions - Maximum speed: 4000 rpm; milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 200V, 3-phase, fuse 151 A - Total connected load: 31 kVA Dimensions - Machine dimensions (L×W×H): 3950 × 2715 × 2800 mm - Weight: 4,400 kg Main Features and Capabilities - Horizontal design for optimized chip evacuation; gantry loading/unloading from conveyors - Automation: Gantry robot with two loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series Hsdpfx Acexxi Nce Tor - Chip conveyor - Coolant filtration: Up to 40 bar, micron filter (Evotech 500PRO) - Coolant chiller: Texa TCW55PMSBCDX00, SN165373 - Process control: Marposs T25 - Broken tool detection: Peek tool menu (Murata/Fanuc option enabled) - Documentation: Electronic/manual available Machine status: IN OPERATION

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 15KX239200001, Technical specifications: Work Area - Maximum turning diameter: 210 mm - Maximum machining diameter: 200 mm - Maximum workpiece length: 220 mm - X1/X2 axis travel: 220 mm / Rapid traverse in X: 24 m/min - Z1/Z2 axis travel: 220/770 mm / Rapid traverse in Z: 36 m/min - Y1/Y2 axis travel: +/-40 mm / Rapid traverse in Y: 12 m/min Automation: - Axis strokes: X - 210 mm; Y - 680 mm; Z - Left 2080 mm / Right 3360 mm; α 270˚ - Maximum speeds (m/min): X - 35; Y - 120; Z - 160; α 270˚/1.5 sec - Load/unload gripper specifications (pneumatically powered): Outer diameter up to Ø170 mm; jaw stroke 30 mm; gripping force: external 128 kgf / internal 138 kgf Main Spindle: - Spindle nose: A8 - Maximum speed: Left 5000 rpm / Right 5000 rpm - Power at 100% duty cycle: Left - 15 kW / Right - 7.5 kW - Bar capacity: left spindle - 65 mm / right spindle - not available Tool Turret with Driven Tools: - Tool interface: BMT55 Hsdpfx Asxwuhuoc Tjr - Number of positions: 15 upper / 12 lower station turret, all driven positions - Maximum speed: 4500 rpm; Milling motor power: 4.5 kW Electrical Equipment: - Operating voltage: 200V, 3-phase, 151A fuse - Connected load: 55 kVA Dimensions: - Machine dimensions (L×W×H): 3200 × 2200 × 3500 mm - Weight: 10,500 kg Main Features and Capabilities: - Horizontal design: Optimal chip removal, gantry loading/unloading from conveyors - Automation includes: Gantry robot + 2 loading/unloading conveyors - CNC control: Fanuc FS31i Model A Series - Chip removal conveyor - Coolant filtration 40 bar max: Filber S.L. FTH5/10, 200 l/min - In-process control: Marposs T25 - Broken tool detection system: Peek tool menu Murata/Fanuc feature enabled - Part detection through spindle: Low pressure compressed air sensors - Bar feeder interface max Ø65 mm - Documentation: Electronic and hard copy available Machine condition: OPERATIONAL

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 7771, functionality: fully functional, pressing force: 100 t, stroke length: 300 mm, operating speed: 75 mm/s, reverse speed: 75 mm/s, table height: 900 mm, throat depth: 1,000 mm, total width: 3,100 mm, overall weight: 8,900 kg, travel distance X-axis: 1,000 mm, controller model: EC20 - graficzne 2D, working width: 3,000 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge speed R-axis: 250 mm/s, back gauge travel distance R-axis: 200 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,000 mm, control type: CNC control, degree of automation: semi-automatic, back gauge adjustment: CNC-controlled, number of axes: 4, actuation type: electric, Equipment: CE marking, emergency stop, european tool clamping system, safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 100-3100 NS (100T - 3060 mm) AMADA tooling system Manufacturer: Netherlands - Lochem Hedsylt Ukopfx Ac Ter We are the official representative of SafanDarley in Poland. - Servo-electric drive - Press force: 100 T - Bending length: 3060 mm - Stroke: 300 mm - CNC control in axes Y1 / Y2 / X / R / Z1 / Z2 - CNC-controlled backgauge with 4 axes - X / R / Z1 / Z2 - 2D graphical control - EC20 model - Programmable light curtain - AMADA tooling system - WILA tooling system - lower clamp compatible with 4V / 2V / 1V / T-type dies, 60 mm base - Lower table crowning compensation

Condition: good (used), Year of construction: 2001, Year of manufacture: 05 / 2001 Hjdpfx Aswmlkzoc Ter Control unit: Fanuc 18 iT Integrated portal loading system Muratec WFL 14-160 workpiece feeding system N° 2 Autoblock dia. 210 mm self-centering chucks N° 2 8-position servo-controlled turrets Static tool holder kit Coolant + air outlet above the left - right spindles “PEL” device on the right spindle Side-unloading belt chip conveyor TOOL MONITOR software TOOL LIFE MANAGEMENT software CE mark

Condition: ready for operation (used), Year of construction: 2019, operating hours: 3,818 h, travel distance X-axis: 155 mm, travel distance Y-axis: 25 mm, travel distance Z-axis: 170 mm, controller manufacturer: FANUC, controller model: 32i-TB, number of axes: 8, This 8s Muratec MW 40 was manufactured in 2019. It features a twin-spindle configuration with automatic loading and unloading capabilities. The machine includes 2 C-axes and 2 Y-axes, providing versatile machining options. With a total of 7 turning holders and 6 boring holders, it is designed for efficient part handling. If you are looking to get high-quality turning and milling capabilities, consider the Muratec MW 40 turn-mill centre we have for sale. Contact us for further details. Hjdpjzcwiysfx Ac Tsr • Configuration: Twin-Spindle CNC Turning Centre • C-Axes: 2 • Y-Axes: 2 • Gantry Loader: Double Gantry Loader • Spindle Configuration: Twin Spindle • Tool Holders: 7 Turning Holders • Tool Holders: 6 Boring Holders • Condition: Fully Functional • Turning Station • Voltage: 400 V • Frequency: 50 Hz • CE Marking: Yes • Loader Type: Gantry Loader • Automation: Automatic Loading and Unloading System • Part Handling: Automatic • Turning Capability: Yes • Drilling Capability: Yes • Milling Capability: Yes • Tapping Capability: Yes • Coolant Filtration: Basket Filter • Transformer: 16 kVA • Transformer Input Voltage: 400 V • Transformer Output Voltage: 200 V • Hydraulic Chuck Foot Switches: 2 • Tool Monitoring System: Muratec Cutting Monitor • Tool Management System: Tool Counter with Sister Tool Selection • Polar Coordinate Interpolation: G12.1 • Cylindrical Interpolation: G7.1 • Rigid Tapping: Yes • Coolant and Air Through Spindles: Yes • Twin Front Spindles: Yes • Books are included (instruction manual in German) Optional: • Parts Infeed Conveyor • Parts Outfeed Conveyor • Chip Conveyor Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Hsdjrpnf Aspfx Ac Tor Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: used, TECHNICAL DETAILS - Number of axes : 4 - Number of spindles : 2 - Number of turrets : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 135 [mm] MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 45 - 4.500 [rpm] - Max. chuck diameter : 135 [mm] TURRET 1 Hjdoydfuaepfx Ac Tsr - Number of positions : 8 - X/Z stroke : 130 / 145 [mm] TURRET 2 - Number of positions : 8 - X/Z stroke : 130 / 145 [mm] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 32 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.800 x 1.875 [mm] - Machine height : 2.420 [mm] - Machine weight : 4.600 [kg] MACHINE HOURS - Number of hours under power : 10842 [h] EQUIPMENT - CNC : Fanuc - 3 colors status lamp - Coolant tank - Chips conveyor : ARRIERE - Parts catcher - Workpiece loading robot * Max. chuck diameter : 165 [mm]