Finger jointing press "ORMA" LS/R 50/16

ORMA LS/R 50/16

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley Dcedpewxdqkofx Acpon with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: good (used), Code: 0136 Brand: ITALPRESSE Model: FORMATIC 20.9 Hydraulic fluid membrane press Two sided lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2000 x 900 Daylight mm 325 Cylinder stroke mm 325 Heating electric boiler Kw 27 Thrust ton 300 ton N° 3 thrust cylinders Hydraulic unit power Kw 5,5 Pressure control manometer Automatic pressure reset Opening timer Dcedpfjpbvqvox Acpen Overall dimensions mm 3300 x 1400 x 2400 h Weight kg 8100

Condition: good (used), Year of construction: 1973, Weinig planer 4-sided / U250 / Unimat 250 planing width: 250mm Planing height: 120mm Spindle bottom 7,5 kW Spindle right 5,5 kW Spindle left 7.5 kW Spindle right 7.5 kW Dsdpfxerigq Ss Acpscn Spindle top 7.5 kW Spindle bottom 7.5 kW Spindle sawing unit 7.5 kW with planing heads with milling tools with knives with all accessories good condition - available immediately Location: Austria, near Sankt Pölten

Condition: used, Weinig Unimat 23 Technical data Working width 30 - 230 mm working height 19 - 200 mm elevated on pedestal Djdoncc Igopfx Acpocn u- re-li-o-u.o without feeder only machine machine is dismantled, immediately available Transport can be organized

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Djdev Tb Hgspfx Acpocn Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), Year of construction: 1995, WITH SLIDING TABLE AND FEED DEVICE TABLE SIZE: 1350 x 850 mm Dsdpjwcq Idjfx Acpocn MILLING SHAFT DIAMETER 35 mm MOTOR POWER 4 KW (5.5 HP) SLIDING TABLE SIZE: 900 x 350 mm FEED DEVICE WITH 4 ROLLERS

Condition: good (used), Item: D-1035-Double bulk feeder with weight Stainless Steel double bulk feeder with weight. Dimension: Vat L 1800 X W 850 X H 1300 mm Bigger lift: 460 mm, Small lift 100 mm, flight 80 mm Dodpfx Aed Nk Ucecpecn L 2700 + weight 500 mm , Total L 3200 mm

Condition: used, Savi shear, working width 700 mm Dedjq Tx R Nspfx Acpjcn

Year of construction: 2007, condition: good (used), functionality: fully functional, Paint drying chamber MEYER AB / Fanmet OY 17m3 Year of construction 2007 )2009 installed ) Manufacturer MEYER OY Finland Dcjdpfx Acett Sy Repen was used for drying lacquered furniture parts. Feeding with tray trolleys Length 3600mm width 2150mm height 2200mm approx. 17m3 electric heating total power 30 kw 18 heating units, each with 1667W, 400 V (length 2360mm) Air flow: 3m3 /sec or 10,000m3 /hour Inner cladding galvanized sheet steel 2 VEM fan motors ( 3,6kW+0,37kW ) ATEX Thermostat 0-120C Overheating protection 0-210C ATEX compliant 94/9/EC CE marked

Condition: used, Year of construction: 2020, Industrial bandsaw CENTAURO SUPERCUT 80 BANDSAW FOR THIN SLICES WITH THE HIGHEST PRECISION The major advantages of a compact and versatile machine for all applications in the field of thin slicing: Thin slicing from 2 mm material thickness Maximum cutting accuracy up to 0.15 mm Minimum cutting kerf from 1.3 mm Ideal for cutting dry and wet wood as well as alternative materials Dsdezvflnepfx Acpecn The surface of the thin lamella can be glued directly, without any further post-processing being required User-friendly electronic control Two programmable feed speeds of the conveyor belt from 0 to 30 m/min for optimal cutting quality and a longer service life of the saw blade Optical sensor for starting the cutting cycle and for automatic speed switching Ground work table Flexam feed belt for optimal performance 6 height-adjustable rubber pressure rollers, whose position can be adjusted to open/close, in order to ensure the optimal pneumatic clamping pressure on the workpiece during the feed and cutting process Oleopneumatic saw blade tension for optimal cutting performance Upper and lower Chaco saw blade guides, which ensure optimal stability of the saw blade during the cutting process Internal and external lubrication of the saw blade for removing resin residues and chips 4 dust extraction connections to optimize the extraction of dust and chips Maximum cutting height 400 mm (optional 500 mm) Maximum cutting width 400 mm Powerful quality motor with 15 kW (20 hp) Ethernet interface for online service and remote maintenance Carbide or stellite saw blades for optimal cutting performance Maintenance-friendly design and easy service