Table mill

Panhans 240A

Condition: used, Heavy-duty wood lathe with hand copy attachment, sold by private owner with extensive accessories, fully equipped, some items in original packaging. Used, excellent condition, low operating hours. Make: Flott-Arnz. Centre distance approx. 1200 mm, centre height approx. 250 mm. Hand copying device with approx. 1000 mm copy length. Four-prong drive centre, live centre included. 5 spindle speeds: 500 - 2500 rpm. Location: 97447 Gerolzhofen, loaded on truck, unpacked. Sale as inspected, in current condition, without any warranty or guarantee. Fpjdpfx Ajyb S Hkel Ujn

Condition: used, Year of construction: 2022, Machine is in perfect condition in small woodoworking shop. Fjdpjy S U Duefx Al Uspn

Condition: used, Year of construction: 2025, Cutting height at 90°: 170 mm Cutting length: 430 mm Horizontal miter angle range: 45°-90°-25° Vertical miter angle range: 60° - 90° - 30° Swivel adjustment with crank: yes Roller conveyor / support table: no Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Motor brake: yes Dust extraction port: 100mm Fpjdpfx Aloiixxno Usn Machine length: Machine width: Weight: 110 kg

Condition: used, Year of construction: 2009, Used machine Year of manufacture: 2009 Single-sided automatic edge banding machine with CNC control, 10" touch screen Industrial conveyor chain 1 1/4" Joint milling unit FI-502 Glue application unit VC-710 End trimming unit IN-801 Top and bottom flush trimming unit RS-100 2 motorized multifunction profiling units - contour milling unit CR-202 (FAST system with 4 standard positions) Scraper unit RBK-503, NC 2 positions Flat scraper RCC-701 Workpiece thickness: 10-65 mm Max. workpiece height with contour milling unit (depending on profiles): 35-65 mm Edge thickness from roll: 0.4-3 mm Edge thickness from strip material: 0.4-22 mm (depending on unit) Minimum workpiece length: 140 mm Minimum workpiece width (with length 140 mm): 85 mm Minimum workpiece width (with length 250 mm): 50 mm Feed speeds: 10-14-18-20 Central extraction connection: 200 mm Extraction connection, edge banding: 80 mm Extraction connection, joint milling: 120 mm Glue pot capacity: approx. 3 kg Heat-up time at half fill: approx. 10 min Length: 6000 mm Width: 1780 mm Height: 1770 mm Machine is offered without the workpiece return unit shown in the pictures Availability: short-term Fpodov R Nk Uspfx Al Usn Location: Flörsheim

Condition: good (used), Year of construction: 2013, Edge thickness Roll 0.4/3 mm / Straps 0,4/22 mm Workpiece thickness 10-65 mm Workpiece overhang 140 mm Feed sppeds 10-14-18-20 m/min Equipped with Twin edge milling unit Gluing unit Snipping unit Rough trimming unit Fine trimming unit Profile trimming unit Universal trimming unit Flat scraping unit Edge buffing unit " Sintra " control unit Dimensions (l x w x h) approx. 7000 x 1400 x 2100 mm Weight approx. 3600 kg Machine number 94391 Fodpfou Hldmex Al Uopn Year of construction 2013 CE

Condition: used, Year of construction: 1994, Used, good condition, top equipment, low operating hours. Equipped with 2 rubber outfeed rollers, segmented infeed roller, electric adjustment. Machine cleaned and lubricated. Planer knives replaced. Test planing completed. Machine is complete with all settings. Manufacturer: Hofmann Model: DH 510-2 Year of manufacture: 1994 Machine no.: 51/2-490-3452 GS wood dust tested Motor: 4 kW Planing width: approx. 510 mm Planing height: approx. 260 mm Segmented pressure bar Segmented infeed roller 2 rubber outfeed rollers Feed rate: 7/14 m/min Number of knives: 2 Knife system: strip planer knives Brück reversible knives Digital height display for planing height Fjdpfsythclex Al Ujpn Electric height adjustment with handwheel fine adjustment Extraction connection: D 160 mm Space requirement approx. 1000 x 1000 x 1500 mm Weight: approx. 800 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: excellent (used), PANHANS long-hole drilling machine Drilling table size 520 x 290 mm Max. drilling depth approx. 130 mm Max. drilling length approx. 240 mm Height adjustment approx. 135 mm Drill spindle speed 3000 rpm Motor power 1.5 kW, 400 V, 50 Hz Space requirement approx. L x W = 900 x 1100 mm Weight approx. 220 kg 2-lever operation WESCOTT drill chuck 20 mm Dowel drilling device with 4 grids (16, 22, 25, 32 mm) Miter stop, adjustable by 45° 2 workpiece clamps Height adjustment with handwheel Motor protection switch with undervoltage release Workpiece stop 1500 mm Including test report for conformity with Section 4 of the AM-VO (German Ordinance on Machinery) Space requirement approx. 950 mm x 1000 mm x 1300 mm Weight approx. 200 kg Note regarding used machines: • Subject to errors in technical specifications and prior sale. • Quoted prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine at the location. • Special agreements are only possible in written form. (We only answer inquiries if you provide your address + telephone number!) Fpsdpeza Dx Njfx Al Uon

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers Fsdpfjxlvktjx Al Ujpn 3x High-performance mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double-sided automatic lateral aligner with motor drive 1x Foot switch for START/STOP of the work cycle 1x Set-up for grooving with height adjustment of the saw blade via the control system 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 hp (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collet 4x Additional collet with single finger 1x Compact Office label printer 1x Cut editor 1x Maestro optiwise - Advanced - N. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) incl. 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). incl. 1 day online training MAESTRO OPTIWISE PRO (as needed) incl. MAESTRO CONNECT 1 year incl. MAESTRO PATTERN IMPORT (255€ free of charge)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR!!! Due to customer insolvency, offered for sale at a reduced price. Location:

Year of construction: 1980, condition: good (used), Format panel saw Altendorf F 45 year 1980 S/N 80-8-203 Slide length: 2500 mm Height and swivel adjustment manual with wheel Motor power: 5, 5kW Fpjdpfeipv Rlox Al Ujn Cutting width: 800 mm 4 speeds 3/4/5/6000 rpm, blade diameter max mm: 450 Weight approx. 1100 kg technical specification under subject

Condition: used, Work area and workpiece capacity Travel range X-axis: 3110 mm Travel range Y-axis: 1620 mm Workpiece passage Y: 1,900 mm Workpiece passage Z: 180 mm Workpiece length in shuttle mode: 1,400 mm Table design: TV FLEX 1600 / FLEXMATIC Number of cross traverses: 6 Positions of traverses: 6 to 12 positions Axis speeds and drive data Maximum vector speed X/Y (PRO-SPACE): 56 m/min Maximum vector speed X/Y (PRO-SPEED): 78 m/min Speed of vertical drilling spindles: up to 8,000 RPM Speed of horizontal drilling spindles: up to 8,000 RPM Max. speed of main spindle: 24,000 RPM Speed of grooving unit/circular saw: frequency-controlled, approx. 2,500-8,000 RPM CNC control and software Operating system: Windows 7 Display: 21.5" LCD Full-HD (16:9) Operation: Keyboard, mouse and machine control panel Software: Maestro CNC Programming: Parametric programming, graphic programming, ISO code, DXF import Machining functions: Milling, drilling, tool management, machining programs Simulation: Graphic simulation of drilling and milling operations TECPAD: 7" touchscreen for machine functions and error messages Mobile operation: Portable control panel for operation along the machine Drilling and grooving unit F23L Vertical drilling spindles: 13 independent spindles (7 clockwise, 6 counterclockwise) Horizontal drilling spindles: 10 independent spindles Arrangement of horizontal spindles: 4 spindles in the X direction on one side, 3 spindles in the X direction on the opposite side, 2 spindles in the Y direction Integrated sawing unit: Grooving and circular saw unit in the X direction Saw blade diameter: 125 mm Motor power of sawing unit: 2.2 kW (approx. 3 hp) Stroke of vertical drilling unit: 75 mm pneumatic stroke Stroke of horizontal drilling unit: 75 mm pneumatic stroke Frequency inverter: Programmable speed control up to 8,000 RPM 5-axis milling unit and tool changing system Main unit: JQX 5-axis milling unit Spindle type: Hiteco HSK-F63 electric spindle Power: 10 kW rated power Peak power (S6): approx. 9.5-15 kW Maximum speed: 24,000 RPM Bearings: Ceramic bearings Cooling: Liquid-cooled spindle Lubrication: Central automatic lubrication system Rear tool magazine TRB 14 Magazine positions: 14 Travel range: 350 mm Fpjdpfxszuwuro Al Usn Pitch: 115 mm Max. tool diameter: 240 mm Max. total tool weight: 70 kg Front tool magazine FAST 14 Magazine positions: 14 Max. tool diameter: 130 mm Max. tool weight per position: 8 kg Max. total weight: 24 kg Vacuum system, workpiece clamping and positioning Vacuum cups: 12 pcs, permanently mounted Dimensions of cups: 145 x 145 mm Height of cups: 75 mm Vacuum pump: Standard 1 vacuum pump Additional vacuum pump: 90 m³/h Workpiece supports: 4 pneumatic workpiece supports Rear stops: 8 aluminum stops Intermediate stops: 8 aluminum stops Side stop: Left reference stop with laser positioning Preparation for clamping cylinders: Prepared for 6 pneumatic clamping cylinders Extraction and compressed air Connection power: 23 + 28.5 kVA Compressed air consumption: 450 l/min Required extraction capacity: 4,500 m³/h Air velocity in extraction: 25 m/s Extraction nozzle: 250 mm