Honing machine

PEMAMO MDR 140 NC

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 208, workpiece weight (max.): 17 kg, type of input current: AC, spindle speed (min.): 150 rpm, spindle speed (max.): 2,500 rpm, total height: 1,550 mm, total width: 800 mm, total length: 1,450 mm, hone diameter: 50 mm, overall weight: 500 kg, Equipment: rotational speed infinitely variable, For sale is a high-quality Pemamo MDR 140 NC honing machine (year of manufacture 2004) in good and operational condition. The machine is ideally suited for precise internal machining in the micrometer range and has been used reliably. Highlights: • Swiss precision machine (Pemamo) • Very high accuracy • Ready for operation – demonstration possible • Robust and durable design Dodpfx Ajzb Enzjf Ujck The machine is immediately ready for use and can be inspected while powered on after prior arrangement. Sold without warranty, ex works. The machine will be delivered without power and compressed air supply. Payment before collection.

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg Dcodpovu Hccefx Af Uok range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: good (used), Year of construction: 2009, Machine will come with robot . Dodpfsxfu S Njx Af Ujck 42.000 rpm

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. Dedpfjx Av Adsx Af Uock

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Dsdowgm Saspfx Af Ujck Weight 800 kg Tools

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 160,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. U-axis in excellent condition. Positioning is highly precise. C-axis for contour grinding is available and fully operational. Control: Fanuc O-M The machine is in daily use and continues to be highly accurate. Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Dcedpfx Afsxp Hq Eo Uek Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.)

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Dcsdpfx Asxf Ikfjf Ujk

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. • Tool magazine: 95 pieces Djdpfx Afex H A Nbs Ueck • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Net machine weight: 8000 kg TECHNICAL SPECIFICATIONS Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Dsdpfx Asw Uc Hnof Ueck Distance between lapping plates: < 390 mm Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Subject to errors or omissions; technical data is provided without guarantee.

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Dcedjrxcu Sjpfx Af Uok Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit