Honing machine

PEMAMO MVR 060 EH

Condition: good (used), Year of construction: 2009, Machine will come with robot . Iedpfxsxfu S No Acqoba 42.000 rpm

Condition: new, connected load frequency 230 V battery 24V / 100Ah Brush diameter 510 mm Isdpfxjvu Hccj Acqjba turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: refurbished (used), machine/vehicle number: 4507, Rectificadora sin centros ESTARTA 327 CNC Ibjdpfsg Ix Hmox Acqea

Condition: used, TECHNICAL DETAILS - Plate - External diameter : 750 [mm] - Internal diameter : 150 - Main motor rotation speed : 4 [kW] - Supply voltage : 380 [V] - Total installed power : 3.6 [kW] WEIGHT & DIMENSIONS Ibedpfexb Em Nox Acqja - Machine floor space : 1100 x 1700 [mm] - Machine height : 2000 [mm] - Machine weight : 1100 [kg] - Number of hours : 5160 [h]

Condition: used, TECHNICAL DETAILS - Spindle speeds : 5 - 300 [rpm] - C axis indexing precision : 0.001 [°] - Vertical travel of the main spindle : 130 [mm] - Vertical travel of the main spindle (manual mode) : 140 [mm] - Rotational speed of the grinding spindle with motor : 4500 - 80.000 [rpm] - Rotational speed of the grinding spindle with turbine : 100.000 - 160.000 [rpm] - Cylindrical grinding without/with intermediate plate max. : 230 / 360 [mm] - Maximum grinding length Z (with block) : 125 [mm] - Maximum acute angle in conical grinding : 16 [°] - Maximum grinding depth in conical grinding with angle : 44 [mm] LINEAR AXES - Travels on X/Y/Z axes : 700 / 500 / 500 [mm] - Rapid traverses rates (X/Y) : 4000 [mm/min] - Cutting feed rates (X/Y) : 0 - 2000 [mm/min] TABLE - Table dimensions : 770 x 630 [mm] - Maximum weight upon table : 500 [kg] - Distance table / spindle nose (min./max.) : 0 - 600 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2650 x 2577 [mm] - Machine height : 2677 [mm] - Machine weight : 5600 [kg] MACHINE HOURS - Number of working hours : 44995 [h] EQUIPMENT - CNC : Fanuc - Coolant tank * with high-pressure pump * with paper filtering unit - Oil mist extractor Ibjdpfjx Av Adsx Acqja - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Weight 800 kg Isdpjwgm Sasfx Acqoba Tools

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 270 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 250 mm, controller manufacturer: HEIDENHAIN, swivel angle B-axis (min.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KERN HSPC EVO was manufactured in 2005. It features a spindle speed of 50,000 RPM, a tool magazine with 95 pieces, and a workpiece magazine with 24 pieces. The machine includes a Heidenhain iTNC530 control system and HSK 25 special holder. Note: the changer arm requires repair. If you are looking to get high-quality milling capabilities, consider the KERN HSPC EVO machine we have for sale. Contact us for more information. Ibedox H A Nbopfx Acqoa • Tool magazine: 95 pieces • HSK 25 special holder • Workpiece magazine: 24 pieces • The changer arm no longer works, it needs a new guide/cylinder, see photo.

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Ijdorxcu Sepfx Acqjba Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Net machine weight: 8000 kg Ibodpfxew Uc Hno Acqoa TECHNICAL SPECIFICATIONS Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Distance between lapping plates: < 390 mm Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Subject to errors or omissions; technical data is provided without guarantee.

Condition: used, Year of construction: 2018, functionality: fully functional, Hwacheon T2-2T YSMC dual turret and dual spindle CNC lathe, year 2018, equipped with SIEMENS SINUMERIK 840-D control, high-performance machine for complex and simultaneous operations, ideal for high-precision series production. Main technical specifications: Max. swing diameter over bed: Ø 880 mm Max. turning diameter: Ø 460 mm (main spindle) / Ø 390 mm (sub-spindle) Turning length: 444 mm (upper carriage) / 437 mm (lower carriage) Bar capacity: Ø 65 mm (main and sub-spindle) Axis travels: X1: 245 mm / X2: 210 mm Z1/Z2: 520 mm Y: ±50 mm (total 100 mm) B: 550 mm Rotary axes C and A: Resolution 0.001° (360°) Spindles: Speed: 50 ÷ 5,000 rpm Power: 11/15 kW Spindle nose: ASA A2-6 Sub-spindle chuck: Ø 210 mm Tool holders: Upper/lower turret: 12 stations each, driven Driven tools: 6,000 rpm, power 5.5 / 7.5 kW Ibsdpfjwt S N Dex Acqoa Tool size: 25x25 mm (turning), Ø 40 mm (boring) Rapid traverse: X1/X2/Z1/Z2/B: 30,000 mm/min Y: 15,000 mm/min Included accessories: TOP AUTOMAZIONI MAGIC bar feeder TOP AUTOMAZIONI RETURN D.65 automatic parts unloader Chip conveyor Coolant tank with pumps and two high-pressure pumps Various fixed and driven tool holders Tool presetting arm with dual head Manuals, electrical diagrams, CE declaration Complete and high-performance machine, perfect for high-productivity multitasking turning.