Hot water+high pressure steam 150°C+200bar

PTC TORPEDO MINI-E

Condition: new, TECHNICAL DATA type: gas-heated drive-through chamber furnace Pgodsg Dgymopfx Akcjk internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking Pgjdpfx Aod Du T Iskcek • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: excellent (used), Year of construction: 2022, Konig Roll Plant Purchased and installed in 2022 Capable of: - Rolls Finger rolls Baguettes Doughnuts and Ring Podpfex A Da Dox Akcogk Weight up to 120g from 40g range 10,000 pieces an hour Also comes with a seeding station, and ring doughnut punch. *Video available on request* Please enquire for further information.

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Pgsdpjdvn E Uefx Akcjk Horizontal disc mass 1200mm up to 1900mm

Condition: new, Type: S 150 l Complete stainless steel Hopper capacity 150 liter Single working shaft with paddles Rotation of shaft in both directions Automatic stopping when cover is open Electric power: 2.2 kW Voltage: 380 V / 50 Hz Installation dimensions of machine in cm: Width: 100 Pedoh Dp Sbjpfx Akcogk Lenght: 60 Height: 100 Delivery time: after advanced payment, one working day

Year of construction: 2012, condition: excellent (used), Dividing 100-600gr Pgedpfx Aefcu Nvskcsk Width 610mm Depth 1350mm Height 1540mm Belt width 245mm Belt length 750mm Engine power 1,5kW Weight 550kg

Condition: new, Screw compressor with refrigeration dryer Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Pjdpfswm Ih Ajx Akcegk Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Spindle speeds 25 - 2560 rpm. Pgsdpfx Aouigzpokcek Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: refurbished (used), Technical data: Weight range: 200-2000 gr Productivity of the machine: up to 2500 pcs/hour at 1000 gr Pjdpstzbxhofx Akcjgk Rounding length: 560 mm Dimensions (L x W x H): 5520x1100x1500 mm Weight, net: 880 kg Connection value: 1.5 KW

Condition: like new (used), Year of construction: 2012, operating hours: 27,000 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture 2012. Steam output 360 kg/h. Max. steam pressure 13 bar. Delivery available at additional cost. On-site inspection possible. Please contact us if you have any questions. Pgsdsydqurjpfx Akcok