Three-jaw chuck

RÖHM

Condition: excellent (used), Year of construction: 2001, Steady rest in good condition, today's new price 55.000,- EUR Lasdpfx Aks Ad Iy Uoqeh span range max.: 400 mm span range min.: 50mm steady rest width: 170 mm steady rest height: 730 mm

Condition: used, Year of construction: 1987, bore capacity in steel (diameter) 32 mm throat 280 mm bore stroke 110 mm spindle taper MT 3 Lodpfjxqrd Hox Akqeah table-size 340 x 400 mm turning speeds 210- 2600 U/min total power requirement 1,8 kW weight of the machine ca. 325 kg dimensions of the machine ca. 950 x 450 x 1750 mm

Condition: used, Technical details: Laedpfx Aksu Nlp Ioqjh jaw width: 160 mm weight of the machine approx.: 55 kg span width: 310 mm Hydraulic vice Jaw depth 49mm i.D. *

Condition: used, Technical details: jaw width: 110 mm weight of the machine approx.: 75 kg Vise RÖHM with hydraulic clamping Clamping stroke max. 60mm, clamping width max. 150mm;jaw width 110mm; hydraulic connection Ø 13,5mm each 2x The jaws are equipped with prismatic clamping and with cylindrical shaped piece Hydraulic Enerpac: Oil tank 300x200x130mm; 5 liters capacity; 380Volt; flow rate 1,11 l/min; connection Ø 17,5mm Equipment: -There are connection cables on both hydraulic units. Ljdpfxeu Nungs Akqeah -on one vice a 2m hose connection for hydraulics is integrated two pieces available no. 1 and no. 2 price per piece *

Condition: ready for operation (used), Outer Diameter: 315 mm boring: 103 mm hight: 120 mm Lsdpjd H Ilyefx Akqoah weight: 54 kg

Condition: used, Technical details: diameter: 400 mm Lodsu Nlh Rspfx Akqsah width: 160 mm weight of the machine approx.: 159 kg revolution per minute: 3000 U/min Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken *

Condition: used, Technical details: diameter: 200 mm passage: 50 mm width: 65 mm weight of the machine approx.: 46 kg Ljdpfx Akeu Nlmaoqoah stationärer Spannstock SSH 200 Kraftspannfutter, hydraulisch Kraftspannung 53 kN Merkmale: Futterflansch Ø 280 x 17mm mit Spann-Nut 4x / 18x30mm Grundflansch Ø 290x30mm Flanschaufnahme Ø 140x10mm 20 Satz div. Formbacken *

Condition: excellent (used), Planspiral chuck Auto Strong Diameter 310 mm Camlock size 8 Taper diameter 139.735 6 stud diameter 25.4 Pitch diameter 171.4 Lsdjln Uixopfx Akqjah Chuck height including flange 135 mm Weight 53 kg

Condition: used, Technical details: diameter: 300 mm width: 165 mm weight of the machine approx.: 88 kg EMAG Nr. 20012826 X0501 Merkmale: automatisches spannen Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar Laodpfeu Nlihex Akqeh *

Condition: used, Technical details: diameter: 260 mm Laodpfx Akju Nliusqjh width: 125 mm weight of the machine approx.: 50 kg revolution per minute: 4700 U/min Merkmale: neuwertig automatisches spannen Spannbereich außen 120mm Spannbereich innen 50mm Flanschenaufnahme innen Ø170 x 6mm *

Condition: used, Swivel bending machine KRAMER, type A-Maut. II 1000 Manufacturer’s serial number: 48 287, year of manufacture: 1990 Lasdpfxefnabyj Akqjh Useful length: 1060 mm Maximum sheet thickness: 3.75 mm Stroke of the upper die: 180 mm Adjustability of the bending die: 60 mm Rear stop: 480 mm Drive power of the bending die drive: 4 kW Drive power of the upper die drive: 1.5 kW Mains connection: 400 volts, 50 Hz - Manual and semi-automatic control - Angle setting via angle pre-selection dial - One-piece pointed beam, 135° - Rear stop with hand crank adjustment and simple measuring scale - Continuous stop rail - Electric foot switch, 3-way Space requirement: L x W x H: 2200 x 1350 x 1500 mm Weight: approx. 2.3 tons Good condition

Condition: used, Technical details: diameter: 200 mm passage: 50 mm width: 65 mm weight of the machine approx.: 45 kg stationary vice SSH 200 Power chuck, hydraulic Features: Chuck flange Ø 280 x 17mm with clamping groove 4x / 18x30mm Lasdpfx Aou Nln Djkqoh base flange Ø 290x30mm flange mounting Ø 140x10mm 20 set of different jaws *

Condition: good (used), Powered tools, VDI 50 standard Lsdoz Ea Nkepfx Akqeah RÖHM 14.9934.0550-00, No. 5601 RÖHM 14.9934.0551-00, No. 5740 and various other models available Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, 0 945 x 605 x 605 mm operating pressure 2,2 - 5,5 bar dimensions 1,0 x 0,61 x 1,65 m 1300 x 1000 x 750 cm Ljdpfeupw Smox Akqeah Air consumption 250 l/min. weight of the machine ca. 0,09 t

Condition: good (used), 3-Jaw Spiral Chuck Manufacturer: RÖHM Diameter 500 mm Spindle mount DIN 55027 size 11 Chuck inner bore 200 mm Chuck height 145 mm Weight 182 kg Accessories / Special Features: • Hard turning and drilling jaws • 1 chuck key Siegfried Volz Machine Tools Laodpopmtgnsfx Akqoh Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel