Shredding plant

Recuperma RECU UZ 2000

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Pedpexrtt Ejfx Amijgk Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.

Condition: excellent (used), Year of construction: 2023, operating hours: 1,500 h, functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), empty load weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Pgedpfx Aeuu Upgsmijk Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: used, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM Pedpfxjtqd Ndo Amiogk THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Pjdjvf E Avepfx Amisgk Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Year of construction: 1963, condition: ready for operation (used), Load: 18t, lifting height: 10,750mm, span: 23,000mm, weight: 35.1t, machine was regularly maintained and inspected. Pjdpfoh I Edvox Amiogk

Condition: excellent (used), Year of construction: 2006, Clamping force: 500 t Screw diameter: 80 mm Platten dimensions: 1300 x 1200 mm Distance between tie bars V: 900 mm Distance between tie bars H: 900 mm Shot volume: 1779 cm3 Shot weight: 1620 g Injection pressure: 1855 bar Working hours: 46.511 Type: Horizontal Podova H Amjpfx Amisgk Drive: Hydraulic

Condition: good (used), functionality: fully functional, Processing plant for (track) ballast 40 cbm feed hopper with push cart OMT 120 kW impact mill with feed and discharge chute Double-deck screening plant 1,400 x 4,000 m Pgedstpamgopfx Amiok with conveyor and stockpile belts Complete electrical installation

Condition: new, functionality: fully functional, machine/vehicle number: GN156, empty load weight: 356 kg, maximum load weight: 944 kg, overall weight: 1,300 kg, axle configuration: 2 axles, loading space length: 2,630 mm, loading space width: 1,450 mm, loading space height: 400 mm, Equipment: uploader, Dropside, railing and co. - Side walls made of galvanized sheet steel 40 cm high, double-walled - with tension locks - Drop sides can be folded down and removed on all sides - Plug-in corner stanchions - Quick conversion to a platform trailer - Sturdy and durable hinges Hanging option for tarpaulins and nets - fitted hook-in knobs for securing tarpaulins and nets Chassis and frame - Towing ball coupling with safety indicator - Partly hot-dip galvanized - bolted chassis with V-drawbar - Frame with two continuous U-profiled longitudinal beams and two cross beams Loading area and floor - Continuous, anti-slip and waterproof screen-printed wooden floor - 12 mm thick Lighting equipment - Modern multifunctional lighting - with reversing light Pgjdoii S U Ujpfx Amijk - with rear fog light - 13-pin plug Wheels and axles - Robust rubber spring axle - with automatic reverse - Equipped with splash guard - Wheel chocks with bracket Lashing and securing options - 6 recessed lashing brackets, integrated into the frame on the cargo bed Documents and freight costs - Freight costs to us already included - incl. vehicle registration document (registration certificate part 2) - Incl. COC document (EEC certificate of conformity) - No further unwanted costs - Discharge possible for an additional charge (pure TÜV fee) Further offers and information can be found on our homepage. I am not allowed to link these directly, so simply enter "Dapper trailer" in your search engine. Photos may show optional accessories. Errors, changes and prior sale reserved.

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Pedpfeq Tpkysx Amijgk Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U

Condition: as good as new (ex-display), Year of construction: 2025, Complete solution for transporting bulk goods such as shredded goods, wood chips, wood pellets, granulate, etc. Aluminum angled conveyor incl. substructure horizontal range 2,500mm (adjustable) Rising range 5,000mm (customizable) Angle in the bend 35,40 or 45° Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Conveyor belt width 500mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt including cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Wavy edge: 50x25mm T-50 lugs - 400mm pitch 2-layer particularly laterally stable Fixed overbelt magnetic separator: Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: magnetprofis GmbH & Co. KG L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Podpfei Igdfox Amiogk We always have various systems of this type in stock. The delivery time for an individual system is currently around 2-3 weeks, depending on the manufacturing effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator