SALM brewhouse 1800 liters - copper finish

SALM, Wien

Condition: new, connected load frequency 230 V battery 24V / 100Ah Gjdpfxsvu Hccs Af Aoka Brush diameter 510 mm turning speeds 175 U/min 0 Luft 24 L / s tank capacity 50 / 50 Liter weight 160 kg range L-W-H 1,1 x 0,52 x 1,0 mm KREMER floor cleaning machine: Packed with battery and charger Theoretical surface cleaning: Output: 2000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area incline: 2% Fresh/waste water tank volume: 50/ 50 L

Condition: used, Technical Data Faceplate diameter: 1580 mm Max. turning diameter: 1700 mm Max. turning height (cross rail support): 1250 mm Godswyn Ntepfx Af Aska Max. turning height (side support): 1160 mm Max. faceplate load: 12,000 kg Max. distance from faceplate to underside of cross rail: 1210 mm Max. distance from faceplate to underside of side toolholder: 980 mm Max. distance from faceplate to underside of turret head: 1420 mm 18 spindle speeds: 2.8 – 140 rpm 18 feed rates: 0.063 – 3.15 mm/rev Total power requirement: 55 kW Required floor space approx.: 5300 x 3500 x 4100 mm Control: conventional

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Gjdjnkb Urjpfx Af Aska Description Model: NWR175 Ricardo Motor Newpower Generator Generator set Continuous power: 150 kVA / 120 kW Maximum power: 165 kVA / 132 kW Engine : Kofo RIcardo R6105BZLDS, 6 cylinder water-cooled Connection: circuit breaker, 5-wire direct connection Frequency : 50 Hz Voltage: 400/230 V including mechanical speed control, AVR, battery charger, soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 3130x1130x1810 mm Weight: approx. 1745kg Diesel tank: approx. 250 L At 100% load: approx. 30.80 L/h At 75% load: approx. 23.7 L/h At 50% load: approx. 15.6 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs Automatic switch - On request Sockets - On request Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,560 h, load capacity: 1,600 kg, lifting height: 4,950 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,150 mm, fork length: 1,200 mm, empty load weight: 3,400 kg, total length: 2,114 mm, drive type: Elektro, construction width: 1,100 mm, Electric 4-wheel forklift Load centre: 500 Mast type: Triplex Speed class: 20 Condition: Ready for use and fully functional Technical condition: normal Gkodpfxsw U E Uuo Af Aea Front tyre type: Non Marking Front tyre condition: 60 - 80% Rear tyre type: Non Marking Rear tyre condition: 60 - 80% Battery voltage: 48V Battery capacity: 625Ah Battery type: PzS Sideshift, 3rd valve, rear work light, front work light,

Year of construction: 2026, condition: new, The equipment is generally considered project stock or, depending on availability, can be offered as a demonstration machine. Application: Accurate dosing of free-flowing products in precise quantities. Scale Features - Easy operation - Fast and uncomplicated cleaning - Low maintenance requirements - Tool-free assembly and disassembly of all product-contacting format parts - Low maintenance requirements - Corrosion-resistant stainless steel construction (1.4301) - Entire control system integrated within the machine housing - Continuously adjustable vibration system for optimal product flow - High accuracy through combination weighing Technical Data - Number of weighing heads: 10 - Weighing hopper volume: 2.5l - Weighing range: 10 - 1000g / 2,500g - Accuracy: ±0.2-1.5g - Speed: 60 bags/min (depending on product) - Control panel: 7" touchscreen display - Power: 1kW / 230V / 50Hz - Dimensions (LxWxH): 1620mm x 1100mm x 1110mm - Machine weight: 380kg Gksdpfxjq T R Sbe Af Aea

Condition: used, Year of construction: 1987, Technical details: Gkodpomf Aw Aefx Af Aea number of spindles: 8

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Available: 14 pieces Godpfjh Hbpwex Af Aska

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor, NEW Specifications: • Condition – new • Manufacturer – Atlas Copco • Capacity – 984 l/min • Main motor power – 7.5 kW Gksdohkttpjpfx Af Asa • Tank – 500 l • Maximum working pressure – 10.0 atm • Built-in refrigerant dryer • Electronic adjustment of compressor operating parameters • Soundproofed enclosure (only 67 dB) • Complies with CE standards • Operating manual in Polish • Weight – 227 kg Additional information: • Manufacturer’s warranty available after commissioning by an authorized Atlas Copco service center • Available within 7 working days

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. Godpfeyf E Tfsx Af Aska This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: used, Year of construction: 2017, Overview  Gsdpfx Afjty Ddrj Aoka This brew house was built in 2017 by Spanish manufacturer INOX DUBRA and has a wort volume of 25 hectoliters. Various equipment is included in the offer, from the brewhouse to bottling. All the equipment is still installed and be viewed and inspected in person at any time.   Scope of delivery  - Brewhouse | INOX DUBRA | 25 HL | Two-Vessel Brewhouse   - Plate Heat Exchanger | CESPEDES | UFT34/1OO- UFT32/12 | 2015  - Cold Water Tank | 2.500L   - 3x Isobaric Fermentation tanks | INOX | 2.500L | 2020  - 3x Atmospheric Fermentation tanks | INDUSTRIAS CESPEDES | 1.000l | 2014  - Brite tank | INDUSTRIAS CESPEDES | 2017   - Grinding mill  - Water tank | 1.000L   - Compressor   - Helicoidal pump   - Volumetric pump - Manual atmospheric filler - Steam generator