Tool taper

SANDVIK COROMANT Rechteckiger Schaftadapter

Condition: like new (used), Year of construction: 2008, amount 1 STK Fpodsxgv Dcjpfx Ah Uop

Year of construction: 2020, condition: good (used), -KOM 3037- An ABUS gantry crane is offered here, which can lift loads of up to 500 kg. This gantry crane also has four cross bridges. Type: free-standing gantry crane system Manufacturer: Abus Year of construction: 2020 Number of cross bridges: 2 Length travel drive: manual by hand Cross travel drive: manual by hand Lifting capacity per crane hoist: 500kg Fodjvw Adnepfx Ah Uspp Number of vertical supports: 4 Power supply: trailing cable - lengthways & power rails - crossways Travel paths - usable area Length: approx.: 13,000mm Width: approx.: 8,400mm Hook height: approx.: 3,450mm Room dimensions / external dimensions Length: approx.: 14,100mm Width: approx.: 8,800mm Height: approx.: 5,000mm

Condition: like new (used), Year of construction: 2008, amount 1 STK Fodpfjxgv Arjx Ah Ujpp

Condition: used, Round-tub vibratory finishing machine WALTHER TROWAL Type CLS-230 Order No. 05.833/00 Year of construction 1969 Tub diameter 1100 mm Total tub height approx. 650 mm Working container / Gross volume max. 230 liters Usable volume approx. 115 liters Speed 1100 to 1800 rpm, stepless Motor power 7.5 kW Power connection 400 Volt, 50 Hz - Operating cycle manual and via timer - Stepless motor speed adjustment via variator gearbox - Manually adjustable eccentric imbalance weights - Container with polyurethane lining – lining partially damaged or worn - Sound-insulated lid - Manual separation flap - Built-in screening device after the separation flap - Liquid connection - Material discharge opening 180 x 150 mm - Control cabinet for wall mounting - Baffle lid with perforated screen Fedpfx Ajfqpxish Ujpp Space requirement with base L x W x H 1800 x 1750 x 1700 mm Net weight approx. 1800 kg In good condition Function description: Workpieces and abrasive media are set in motion by the generated vibration and are recirculated extremely gently. The constant relative movement between workpieces and abrasive media results in deburring and surface finishing of the workpieces.

Condition: new, functionality: fully functional, Year of construction: 2026, Vertical Broaching Machine VADARI GmbH TYPE SRM 2026 – 60 kN – New Machine – BROACHING MACHINES MADE IN GERMANY! Currently available with special conditions ==> ==> Information for manufacturers or dealers with in-house production: If required, the drawings, rights, spare parts, customer and prospect data, as well as planning and manufacturing documentation (also for a variant with 9 tonnes of pulling force) of the broaching machine can be acquired from us. Feel free to contact us if interested. ==> The new machines are custom-built to order. Short lead times and quick delivery possible. ==> Currently, spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are immediately available. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special pins for internal gear cutting, etc.) and accessories available upon request. Please inquire separately. All broaching tools and holders from other manufacturers can continue to be used with our broaching machine! Complete manufacturing and assembly in our own plant in Germany. Prompt delivery possible by arrangement. We also offer spare and wear parts (spindles, spindle nuts, motors, gears, and all other required components – including electrical parts) for Wolff and VADARI SRM broaching machines. Vertical Broaching Machine Type SRM 2026 – NEW MACHINE: The machine is mainly used for the production of keyways from 3–28 mm and profiles of similar dimensions. Thanks to its compact design and small footprint, the machine is suitable for small, medium, and large businesses. Its low price also makes it worthwhile for small series or single-piece production. Drive is provided by a pole-changeable gear brake motor. The maintenance-free double spindle drive ensures smooth operation, central pulling point, and constant cutting performance. The open worktable allows even large workpieces to be easily placed. In most cases, clamping of the workpiece is not required. Stroke adjustment is achieved with adjustable end switches with stroke limitation. For short hubs/workpieces, several workpieces can be stacked on top of each other. Broaching needles, mandrels, and spare parts available at attractive terms on request. Technical data: Pulling force: 60 kN at 3m/min; 40 kN at 6m/min Broaching speed: 3 m/min and 6 m/min (optionally available with stepless speed adjustment from 0 to 6 m/min via extended electronics) Return speed: 6 m/min Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: unlimited Worktable: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Footprint: 750 x 570 mm Total machine height: 1510 mm Drive output: 3.7 / 4.4 kW Electrical equipment: 400 / 230 Volt 50 Hz Control voltage: 230 Volt Operating voltage: 400 Volt 50 Hz Paint finish: outside RAL 7035/7036/7016, inside RAL 3000 or custom Safety door: Standard equipment Coolant system: Standard equipment Fodpeuqbnhofx Ah Uepp The machine complies with the current Machinery Directive and is CE marked.

Condition: good (used), turning diameter over cross slide: 870 mm, spindle bore: 162 mm, turning length: 3,000 mm, turning diameter: 870 mm, center width: 3,000 mm, Distance between centres: 3000 mm Swing: 870 mm over bed, 560 mm over cross slide Weight between centers: 3.600 kg without steady Fpjdsw Sm U Djpfx Ah Uop 4.400 kg with 1 steady 5.600 kg with 2 steadies Spindle speeds: 0 - 900 Rpm Spindle bore: 162 mm CNC Controller: Fagor Featured with: - Additional chuck at back end of main spindle (oilcountry) - 1 fixed steady Ø420 mm - 1 moving steady - 4-jaw chuck Ø800 mm - 3-jaw chuck Ø 400 mm - 10 Toolholders - Coolingpump/chiptray at back end - Machine documentation Country of origin: Spain Motor power: 30 kW Machine weight: 9.000 kg Machine LxWxH: 5,1 x 2,4 x 2,0 mtr.

Condition: excellent (used), Year of construction: 2019, Hainbuch centroteX quick-change system (2019 model) • 2x centroteX M machine adapters (A037017.0382B): o Short taper size: KK8 o Drawbar connection: M85x2 o Length: 53mm o Opening: 78mm • 1x TOPlus mini Axfix size 65 (A038531.0015C) o ID no.: 10000678 o Length: 136mm • 1x TOPlus mini Axle pull size 65 (A038530.008C) o ID no.: 10000676 o Length: 134.5mm • 1x Hainbuch (HWR) InoFlex VT026 – 4-jaw chuck o Length: 179mm o Diameter: 210mm • 1x Forkardt 3-jaw chuck (3QLC 250-72 Z8-S12) o Length: approx. 155mm o Diameter: 257mm • 1x monteq change system (A012708.0009B) • 1x D400 mobile container o Storage of the 4 listed clamping devices o monteq change system + Tiger crane hook mounted on the side • Descriptions/Instructions • 1x Tool box with accessories Accessories • TOP65 clamping head (coarse for raw material) Fpsdpfx Ahsv Ivakj Usp o 1 each: d12, 20, 30, 36, 40, 50, 55, 60, 65 • TOP65 clamping head (hexagon) o 1 each: SW36, 45, 46, 50 • TOP65G clamping head (smooth) o each 1 pc.  d8, 10, 12, 14, 15, 16, 17, 18, 20, 22, 23, 24, 25, 26, 27, 28, 30, 32, 33, 34, 35, 36, 39, 40, 42, 44, 45, 46, 50, 54, 56, 60, 62, 64, 65 o 2 pcs.  d38 • 1x boring ring for clamping head 65 • 50 clamping heads in total • Jaw accessories o for HWR 4-jaw chuck  1 set of reversible jaws  3 sets of claw jaws o for Forkardt 3-jaw chuck  1 set of hard Reversible jaws o Various T-nuts + screws o Various spacer bolts for jaws (adjust the clamping length to the material) • Various soft jaws (2 pallets)

Condition: new, MEP SHARK 350 NC HS 5.0 Fully automatic two-column metal band saw Item number MEP SHARK 350 NC HS 5.0 Motor power 4,0kW Bench opening 355 mm band dimensions 4640x34x1,1 mm weight 2800 Kg speed 15 - 115 m/min. infinitely variable cutting surface 0° 350 / 350x350 mm cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: Automatic hydraulic band saw machine in two-column design for 0° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw machine which can also be operated semi-automatically, with the new MEP 50 Windows 2 "CE" based control system, specially developed by MEP for automatic machines. The standard equipment includes: Driven chip conveyor, installable on the right or left side of the machine. Clamping pressure regulation of the vices. Fpjdpfxji Hmcde Ah Ujp Feeder with vertical rollers for lateral material support. Clamping pressure regulation. 100 programs can be stored. The machine is available with 34 or 41 belt - without extra charge.

Year of construction: 2008, condition: used, x-travel 2000 mm y-travel 620 mm z-travel 520 mm tool taper 2500 x 600 mm Fodpfx Ahoulnbke Uspp control 2000 kg tool magazin: SK40 rapid traverse HEIDENHAIN table-size 30 - 8000 U/min feed 45 m/min total power requirement 45 m/min workpiece weight max. 20 kW diameter of tools max. 10500 kg tool length - max. 5400 x 3300 x 3000 mm

Year of construction: 2015, condition: excellent (used), 10 turning steels Make Sandvik Coromant : 1 : 340 SC5 DCLHR 291311 285 2226 2 : 340 SC5 DCLHR 291311 285 2226 3 : 340 SC5 DCLHR 291311 285 2226 4 :C5-PCLNB-35060-12 Sumitomo 5: PSC50-DDHNL-35060-15 6: C5-PCLNB-35060-12 Sumitomo 7: C5-PCLNB-35060-12 Sumitomo 8: SECO S5-DCLNR-35060-12 9: MPDES26073-105R03C Fpedsfr T D Tjpfx Ah Uop 10 :MPDES 26073-105RO03C Tools are sold individually or as a lot Unit price 80 Euro plus VAT.