Beam saw

Schelling FL430/410

Year of construction: 1997, condition: ready for operation (used), Technical Specification Max. Cutting Length 4200 mm This SCHELLING FL 430/410 panel saw was manufactured in 1997. It features a cutting length of 4200 mm, a slider of 4100 mm, and a saw blade diameter of 450 mm. The saw blade projection is 130 mm, and it can handle package heights up to 120 mm. Powered by a robust 31 kW motor, this machine offers reliable performance for your cutting needs. Contact us for more information about this machine. Rsdpfx Agjx D D S Njzol Application Types Sawing (Wood)

Condition: new, Type 1300-2S Working width 1300 mm Min.working length 400 mm Working thickness 2-80mm Grinding roller speed - Frequency control Feeding speed 5-20 m/min Total motor power 6.27 kW Transport dimensions 1700x2100x1400mm Weight 1200 kg Rodpfx Aem Dr Rgjgzsl Price 6100 Eur (EXW Jonava, Lithuania)

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Rodpfx Aetk It Ssgzjl Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: used, Year of construction: 1999, functionality: fully functional, saw blade diameter: 350 mm, working length: 3,200 mm, working width: 3,200 mm, saw blade speed: 4,600 rpm, saw drive: 7,500 W, working height: 60 mm, Equipment: documentation/manual, Homag Optimat CH04/32/32 Panel Saw – Fully Equipped Redpfx Aow S Tqlogzjl Still in use to date, 1 to 2 days per week, but offered for sale due to business closure in Slovakia. Always well maintained. ✅ Powerful performance Saw motor (7.5 kW) – Scoring saw (1.1 kW) Main saw RPM: 4600 rpm – scoring saw 5100 rpm ✅ Ease of use Air blower unit for easy positioning of panels to be cut Immediately available, fully equipped 📍 The machine is located in Slovakia and must be dismantled and collected on site by the buyer.

Year of construction: 2001, condition: good (used), I sell the widebelt sanding machine Costa SA2 TS 1350, year 2001. Configuration electronic segmented pad - brushing unit. Working width 1350mm Bands 1380x2620mm Pressure rollers for short elements. Air-blow on both units. Total weight 2600kg Rjdpfxeg Trufe Agzol 1 motor 11 kW End brushing unit with dust extraction. Including documentation. Condition good. Available immediately.

Year of construction: 2001, condition: used, - heating plate size (mm): approx. 1500 x 2700 - usable area max. (mm): 1250 x 2450 Redpjkt N Huefx Agzol - loading side (mm): 1500

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Fully automatic edge magazine for roll and strip material Redpjx Aqx Tjfx Agzsl GLU-JET cartridge glue application station + PU gluing Adhesive application via nozzle technology Sensing nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness With pneumatic tilt adjustment from 0-10° for the trimming saws Milling unit: flush trimming 6 mm, radius trimming, bevel trimming - 15° Corner copying unit - 3 mm edge thickness Scraper unit for bevels and radii with 2 scraper holders Flat scraper unit - finish Buffing unit Spraying device in infeed and outfeed area as well as for PU Machine comes with all processing tools Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: used, Year of construction: 2002, functionality: unexamined, cutting height (max.): 100 mm, cutting length (max.): 3,230 mm, power: 21 kW (28.55 HP), cutting width (max.): 3,100 mm, main saw diameter: 450 mm, Machine type: FLM 330-310 / MCS-F Cutting length: 3,230 mm Cutting width: 3,100 mm Year of construction: 2002 Saw blade projection max .: 130 mm Saw blade diameter max .: 450 mm Main saw motor: 21 kW Scorer aggregate Scorer saw blade diameter max .: 200 mm Package height max .: 100 mm Package height min .: 10 mm Saw aggregate forward: 0,2 up to 50 m / min Saw aggregate backward: up to 50 m / min Feeder: up to 25 m / min (Europe: forward 25 m/min acc. EN 1870-13) Number of clamps: 8 pcs grip push clamp Rsdpfx Asww Hk Rsgzsl Clamp opening: 130 mm Strip aligner before and after the pressure beam Air cushion tables: 2 pcs. (2200 x 700 mm) Roller table: Cross aligning device in the roller table Cross alignment stop at the roller table Machine table: heavy-duty steel construction machine table surface is precision machined Brass table lips Automatic cutting length adjustment Errors and alterations in the technical datas and informations excepted! (displayed photos are symbol photos)

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed Rodpfx Ajvdtxiegzsl - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) with 5 axis (X-Y-Z-C-5th) for routering, boring, cutting and edge banding Numerical Control ICOS CNC (IMAWOP) Max useful working area (without edge banding) mm 4000 x 1600 (2000) x 100 (axe Z stroke mm 650) Max useful working area (edge banding process) mm 4000 x 1600 x 100 (panel thickness) No. 8 movable rails (supports) length mm 1400, LED displaying both the axe X and axe Y position Vacuum cups (with No. 2 vacuum pumps, capacity 140 m3/h each) Safety side metal grids and front emergency carpets Motorized belt to evacuate the wastes from the working process Rjdpfx Agow A Ruqozel No. 1 Vertical Electro-spindle ROBOTKOPF HSK F63 (Kw 16) Automatic Tools Changing System, with 18 folds (places) No. 21 Independent vertical boring spindles (4 x Kw 1,2) No. 8 Independent horizontal boring spindles (4 in X + 4 in Y) Circular Saw (tiltable 0°- 90°) diam. (mm) 200 Glueing Unit (P.U.R. Glue + Quick Melt unit 283.203) VT 100 / 100 WITH 45° INCLINED EDGE BANDING UNIT Edge coils supporting unit (No. 2 reels) OPTIONALS: No. 1 Aggregate Flush Milling / Trimming No. 1 Aggregate Flush-Trimming / Profile Scraping Unit