Fan

Schuko K 400

Condition: new, Year of construction: 2026, Size: 4 Nominal heat output: 116 kW -- Complies with German Federal Immission Control Act (BImSchV) Stage 2 and CE standards -- Combustion chamber fully lined with refractory bricks Suitable for rooms of: 2,900 m³ (according to DIN) Bodpfxsdlhcde Apqewp Fuel: Logs, chipboard, wood chips, wood chip briquettes Fuel consumption: 30 - 35 kg/h Forced air supply, free-blowing: 7,500 m³/h Exhaust outlet: Ø 600 mm Flue gas connection: Ø 220 mm Weight: 1,550 kg PLC control cabinet: 380 volts

Condition: reconditioned (used), power: 30 kW (40.79 HP), hopper volume: 800 l, working width: 800 mm, Slow-speed shredder, 800 x 1000 mm hopper, 30 kW motor, hydraulic pusher, reversible knives Bwedpfx Apowzg Tajqep

Condition: new, Year of construction: 2026, Extremely powerful industrial magnet for iron separation Special price: €990 net (shipping €14.90 net) *Construction lengths can be found in image 2 The active side is equipped with a stainless steel end plate (material 1.4301). Threaded holes are provided on the rear side for mounting; *handle available on request The block magnet systems can be used at temperatures of up to max. +100°C operating temperature. The magnet surface should be cleaned regularly from captured iron parts. Pickup distances for all types, for example: For a steel nut M5: approx. 60 mm For an M5 x 30 screw: approx. 100 mm Bsdstqfhxjpfx Apqswp Mounting example 1: Mounted above a conveyor belt, 'iron parts jump onto the holding surface of the magnet.' Mounting example 2: Mounted within a pipeline system with direct contact to the material flow. For maximum separation safety, a cascade setup of multiple block magnets in series is possible. Assembly and safety instructions: When handling, already upon unpacking and later during installation, ensure that there are no loose iron parts, such as tools or screws, nearby. The magnetic force is so strong that painful injuries may occur if fingers get caught between iron parts and the active surface. There should be no steel parts under the active surface within a minimum distance of 400 mm.

Condition: used, Year of construction: 1999, Shredder Nazzareno K700 Serial number: 97013 Year of manufacture: 2007 Motor power: 18.5 kW Opening: 740x1400 mm Rotor length: 750 mm Screen diameter: 10 mm Bedpfx Apewh Na Aeqjwp Includes feeding conveyor Transport dimensions: 3600×1350×1900 mm (L×W×H), Weight: 3500 kg - Year: 1999 - Documentation available: No - CE certificate present: No - Serial number: 97013 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor, trough screw conveyor, trough screw conveyor -Distance inlet-outlet: 3400 mm -Drive motor: KEB 0.75 kW Bwedpfx Apjwna Dloqsp -Speed: 24 rpm -Auger: Ø approx. 270 mm -Auger pitch: 260 mm -Inlet/Outlet: Ø 250 mm -Design: stable -Dimensions: see technical drawing in the photos -Transport dimensions: 4290/400/H590 mm -Weight: 400 kg

Condition: used, Year of construction: 2023, Special price on request!! Demonstration machine! Machine Concept: The WEIMA high-performance shredders, with their flexible application possibilities, can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer waste, etc.) into fuel chips and achieve enormous volume reduction, especially with bulky materials. Operation: The machine is equipped with a large feed hopper, which can be loaded either by conveyor belt or manually. The hopper can be customized according to individual requirements and ensures continuous and cost-effective material feed without the need for manual assistance. A hydraulically controlled pusher supplies the wood waste to be shredded to the rotor's cutting area, operating automatically and load-dependently. The internal slider guides are made of highly wear-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are mounted with universal joints to prevent lateral forces on the piston seals. Bjdpfx Apjvfy Rzsqewp The patented, profiled V-rotor made from solid steel has a diameter of 252 mm and operates at a rotor speed of 80–120 rpm. The concave-ground, aggressive, and four-way reversible cutters / cutting crowns are located in milled knife pockets on special cutter holders. This patented system, by enabling for the first time the reduction of the cutting gap between the counter knife and rotor, ensures high throughput capacity, low energy consumption, and optimal discharge of shredded material. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one side of the rotor shaft. Technical Specification: Motor power: 18.5 kW Hopper opening: 600 x 800 x 1,050 mm Working width – rotor length: 600 mm Rotor diameter: 256 mm Rotor speed: 60–100 rpm Number of knives: 28 Type and size of knives: concave / 40 x 40 mm cutting crowns Screen hole diameter: 12–15 mm Paint: WEIMA Standard RAL 2002 / 7016 Connection: 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Standard equipment: - V-rotor with one knife row 40 x 40 mm - Vibration-damping machine feet - Pressure bar on pusher - Horizontal pusher - Control cabinet with 5 m cable, incl. PLC control and LOGO! text display - Bolted screen - WEIMA WAP gearbox - Extraction socket Ø160 mm - Straight feed hopper Additional equipment: - Additional rotor knife row (28 knives) - Self-cleaning hopper (LOGSPACER) - 4-way segmented floor - Fast-reverse hydraulics with shock valve Location:

Condition: used, Year of construction: 2019, functionality: fully functional, overall weight: 240 kg, grinding wheel diameter: 200 mm, Mebor BA grinding machine, available due to restructuring. Tooth pitch: 20-50 mm Blade width: 70-210 mm Blade length: 10,000 mm Grinding speed: 30 teeth/min Grinding angle: 17° - 32° Grinding wheel: 200x10x20 mm Water cooling, wet grinding Bwedpfxoxyhl Ee Apqsp Timer

Condition: ready for operation (used), The item in my auction is a conveyor belt with a length of 4.7 m and belt width of 1.35 m. I have four identical units. The price is for 1 piece. Possibility of transport. Bwsdpowz Uktsfx Apqsp

Condition: good (used), Year of construction: 2013, Heating system for wood fuel (wood chips or logs), can generate steam up to 150°C, but is also suitable for hot water. Hydraulic feed, therefore larger fuel material can also be used. Heating capacity up to 850 kW, but can also deliver up to 1 MW thermal output. The unit is currently in storage. Bjdpfx Ajyhlrmopqowp

Condition: used, Year of construction: 2010, Heavy-duty shredder with large rotor Low operating hours Used, excellent condition, low usage Manufacturer: DHB-Maschinenbau Type 800 Year of manufacture: 2010 Operating hours: 2108 Machine number: 30123 CE type-approved Motor: 30 + 2.2 kW Slow-speed With hydraulic push floor Hopper opening: 800 mm x 1000/1300 mm / 1.25 m³ Bsdpfx Aoxddukepqewp Cutting width: 800 mm Rotor size: 800 x 400 mm diameter Vibration dampers Number of blades: 46 concave pieces Screen hole size: 15/20 mm New price approx. €45,000 Extraction connection D 200 mm Required space approx. 2700 mm x 1600 mm x 1900 mm Weight approx. 3400 kg Total connected load approx. 32.5 kW Storage location: 97447 Gerolzhofen, free loaded, unpacked Sold as seen, in current condition No warranty or guarantee