Suction filter

Schuko

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, volume flow: 9,400 m³/h, power: 15 kW (20.39 HP), input frequency: 50 Hz, Two fans are offered; the stated price is for each fan individually. The two fans are identical in design. In addition, suitable pipe material can be purchased separately, if required. Lhjdpfx Ajxcv Ndogpei

Condition: refurbished (used), DIFFERENT TYPE OF MOTOR AND SLIDE for CELASCHI DET Lhodpodvlcyjfx Agpei SECOND-HAND, FULLY RECONDITIONED

Condition: ready for operation (used), Year of construction: 1995, Schuko spray booth wall with supply air unit + supply air ceiling Offered at a special price, but must be dismantled by the buyer Lhedsxvivqspfx Agpoi Technical data: see photos Location: ex-site Saarland

Condition: used, Year of construction: 1994, Bagging stand filter Second-hand Lhedpfxozk N H So Agpei Year of manufacture: 1994 with weather protection cladding with return air ducting with S 250 fan 4590 m³/h Motor 4 kW Availability: at short notice Storage location: Villingen-Schwenningen If you dismantle and collect the unit yourself from the site, it can be made available for 500.-€ + VAT

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood Lhsdpfx Agev Si Szjpoi The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, Year of construction: 1999, Second-hand fan Centrifugal fan with V-belt drive Suitable for use in both raw air and clean air applications Steel impeller with steel blades mounted on a multi-bearing intermediate shaft Discharge direction GL 360/5 Connection: 300 mm Motor power 11 kW Air flow rate 7,000 m³/h Availability: at short notice Storage location: Röllbach Lhodpfx Agjzk Niyspei

Condition: used, Year of construction: 2003, Filter area: 50 m² Dimensions: 1650 x 1580 x 3550 mm Weight: approx. 500 kg Substructure with discharge screw: Briquetting press Schuko C 800 - 2 with extinguishing device Motor: 1.5 kW Weight: approx. 1200 kg Lodjzb N T Uopfx Agpshi Storage location: Supplier

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Lhodpfx Ajvxlqmogpoi Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: used, Year of construction: 2011, Mobile dust extraction system, Schuko connection, diameter 160 mm Lhodpfx Aszmag Ijgpoi Dimensions L/W/H in mm: 2045x870x2125 Power: 2.2 kW

Condition: new, SCHUKO Vacomat 140/160 XPe clean air extraction system - Exhibition unit - Filter generation motorized, mobile, extraction side right or left, can be remounted ----- Technical data ----- Test mark: H3 / BGHM HO 193023, Extraction nozzle Ø: 1 x 140 / 160 mm, Nominal volume flow: 1,447 m³/h, max. negative pressure: 2,200 Pa, Filter area: 9.5 m², Residual dust content: < 0.1 mg/m³, Number of bags: 1 piece, Motor: 2.2 kW, Dimensions (LxWxH): 1,665 x 900 x 1,980 mm, Weight: 306 kg, Dust class M: AWN 16 - new exhibition machine - Lodpou R Szyefx Agpehi

Year of construction: 2001, condition: like new (used), Double-aggregate grinder, two lower aggregates 2 x7.5 kW main power, 4 kW feed, lifting and lowering 2 kW, the machine after renovation, conveyor belt in very good condition. New graphite shoe. The machine has two aggregates from the bottom, contact rollers rubber first shaft second Combi system with graphite runner. Working width 630 mm. Two feed speeds slower faster. Length of grinding belt 1900 mm. Pneumatic oscillation. Tensioning the belts pneumatically. Speed of grinding belt 18 m / s. grinding shoes 1. Declaration of conformity CE power 21 kW nominal whole. Machining height 160 mm. Maszyan has two lower working shafts. Transport tape top system. Lhedpjfxpbmjfx Agpsi

Condition: used, Year of construction: 1996, Suction nozzle diameter: 120mm Nominal volume flow: 980 m³/h Volume flow monitoring: Pressure difference display Negative pressure: 1100 pa Filter area: Filter cleaning: manual Motor power: 2.2 kW Machine length: Lhsdpfetqv Ixsx Agpsi Machine width: Machine height: Weight:

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 160 -Diameter: 160 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar Lodpfx Agjmydmqspjhi -Number: 5x gate valve available -Price per piece -Dimensions: 530/220/H150 mm -Weight: 4.5 kg/pc.

Condition: used, Year of construction: 1997, Line 3 Stenner MHS9 machines from 1997 Lhedpfxjw Nrhks Agpsi

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 180 Lsdpfxsmydmus Agpohi -Diameter: 180 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 2x gate valve available -Price per piece -Dimensions: 600/250/H140 mm -Weight: 5 kg/pc.