Double end tenoner

SCM D 80 K SP3B

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), Kedpslu D Tfsfx Agzonf – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: excellent (used), Year of construction: 2003, Double end tenoner Celaschi 4+4 motors Opening side up to 3000 mm Kedpovx Afnjfx Agzsnf

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, working width: 1,350 mm, Costa calibration machine Knjdpswmxh Tofx Agzef

Condition: excellent (used), Weinig Unimat 500 four-sided planer Working width 230mm Working height 140mm Number of spindles 6 Spindle arrangement: 1.Bottom 7.5kw 2.Right 7.5kw 3.Left 7.5kw 4.Top 11kw 5.Top 11kw 6.Bottom 7.kw Total power 56kw Feed speed adjustable on inverter Memory system Pneumatic pressure divided into 3 sections Knsdsthk T Iepfx Agzjf 4 rows of metal material feed rollers 2 rows of rubber drawing rollers 1 roller in the tabletop driven by a cardan shaft Length of input table top 1980mm Worktops made with Marathon Coating technology CE certificate Extraction stubs 6x140mm Machine dimensions 394x185x195cmH

Condition: used, - Adhesive application with 1 profiled roller for Packaging height 300mm over 1 application roller - The drive via worm gear motor 0.37 kW - 1 ST left - 1 ST right - Fits DIMTER HK 200 and HK 400 Knodecht Nyspfx Agzsf spare parts dimter in stock equipment in stock accessories in stock

Condition: good (used), functionality: fully functional, number of engines: 4+4 Knjdpfx Aow D Nq Tjgzsf opening: 6 meters

Condition: good (used), WEINIG PROFIMAT 22N four-side planer - DTR - German production - adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm Kodpfx Ageh Akbaezenf spindle diameter 40 mm 1) 4 kW lower head 2) right head 3) 5.5 kW left head 4) 4 kW upper head 5) universal head 360 ° 4 kW 2.2 kW feed motor feed speed 5 - 20 m / min four upper drawing steel rollers two upper pulling rubber rollers one pull roller in the table top feed on cardan shafts electric height adjustment pre-table length 1970 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 380/200/170 cm weight ~ 2000 kg

Condition: like new (used), Year of construction: 2004, HYDRAULIC PRESS FOR GLUING WOODEN ELEMENTS TO THE THICKNESS OF HSKG Category: VI - Hydraulic presses for gluing wooden parts. The HSKG device is used for gluing wooden cut-thickness parts under high pressure of hydraulic cylinders. The range of achievable crushing forces per cylinder is 5-11kN (horizontal) and 25-55kN (vertical). The gluing of elements is carried out in a stack with the dimensions of the loading field. Stack forming is carried out by hydraulic compression between the sliding vertical beams and the vertical slats of the transverse cylinders. Both stack forming elements are equipped with wooden or metal inserts corresponding to the profile of the slat stack. Gluing wooden elements from the thickness improves the quality of the frames, reduces the cost of machining, reduces the amount of wood waste. Technical and operational data ( of standard execution HSKG - 6m ) Number of loading fields pcs 4 Dimensions of a single loading field - loading height - length of slats in one field mm mm 1140 1530 Maximum width of slats mm 150 Maximum length of glued elements mm 3120 Installed power kW 3 Electricity supply V AC 3/N/PE, 400V 50Hz Control voltage V DC 24 Number of actuators on one field: mm Knsdpfjtrl R Aox Agzsf mm O 50x100 - 3 pcs. O 80x100 - 3 pcs. External dimensions (L x W x H) mm 8120x1000x2300 Weight of the device kg 4800 At the request of the customer, we also make other configurations of pressure actuators control depending on the expected length of glued elements, as well as other lengths of individual working fields in different quantities in the whole press set, and working width of up to 220 mm maximum with increased pressure force.

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Drive chain: servo motor Min. working width: 40 mm Kodpfx Asn Hwl Aegzenf Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Condition: refurbished (used), pressing force: 10 t, working height: 805 mm, total length: 1,700 mm, Finger jointing press Finger jointing press Cycle press for finger joint connections Ksdpjt Sc Swefx Agzjnf Pressing force: 10 t Hydraulic finger jointing cycle press Wood width: 80-280 mm Wood thickness: 18-80 mm OPTIONAL with hydraulic unit 300 ltr and 5.5 kW motor, manufacturer GOD with electrical system