Surface planer

SCM

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table dimensions: 900 × 770 mm Bjdpfx Ano Ad Igzepslp Additional work table: 1,000 × 300 mm Table height adjustment: 115 mm ROUTING HEAD Speed: 10,000–20,000 min⁻¹ Swivel range of routing head: 0–60° Spindle stroke: 135 mm Spindle diameter: 85 mm MACHINE DETAILS Manufacturer: SCM Type: R9 Year of manufacture: 1977 Machine type: Overhead router Dimensions (L × W × H): 1,650 × 1,250 × 2,000 mm Weight: 1,500 kg

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. Bjdsua Tbwepfx Anpjlp SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), CATALOGUE NUMBER 7901 Technical specifications: - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm - from above: - ejectors (barrier to prevent material from moving backward) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth sliding rollers, metal - from below: - guide strip - ejectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 22kW - brake - diameter of the dust extraction nozzle 200mm - overall dimensions L/W/H 2300x1370x1570mm - weight approximately 1700kg ADVANTAGES - Made in Italy - Very good condition - DTR documentation - Used multi-blade saw Bledpfx Aszul Akjnpsp Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2003, Width 520mm Motor 7.5kw 380V Rollers in the table Split entry roller Sharpening tree 4 chisels Maximum height 250mm Electrical display Blodpfx Aj Ahx Szenpjp

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater Blodpfxezgx H Ho Anpop —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal price extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows 2) IT integration with a post-processor ----- Machine still in operation, available for viewing! ----- Technical Summary (detailed description available upon request!): ----- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Bjdpey Hl Iyefx Anpslp Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 1995, Window manufacturing line Manufacturer: SCM Type: Method K Year of manufacture: 1995 Technical data Tool configuration: - 1st crosscut saw spindle - 2nd mortise and tenon spindle - 3rd profile spindle - 4th profile spindle - 5th hardware spindle - 6th glass bead separator saw Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is not binding. Blodpfs Ahn Ihox Anpep

Condition: used, SCM S 630 Heavy-duty thickness planer – for carpentry and timber framing Planing width 630 mm Planing height 300 mm 4-knife safety cutterhead with automatic brake / indicator light Segmented pressure beam – aluminum Bsdpoz Ay Ttofx Anpelp Grooved steel roller at the infeed Rubber rollers at the outfeed Undertable rollers 7.5 kW main motor Electronic thickness table adjustment – digital/LED Infinitely variable feed rate 6-20 m/min Machine from a vocational training workshop in TOP condition Available from stock in Lieboch

Condition: excellent (used), Catalog number 8139 TECHNICAL DATA - max. diameter of the main saw blade with a scoring saw: 300mm - max. cutting height: 100mm - main saw blade adjustable up/down + angle, manually - spindle diameter: 30mm - with a crosscut fence - cutting length on the fence: 3200mm - cutting width adjustable manually with the fence: 1300mm - with a side fence - with a scoring saw - max. diameter of the scoring saw: 120mm / 8500 rpm - spindle diameter: 20mm - main motor: 5.5kW/4000 rpm - diameter of the dust extraction port: 60mm - dimensions of the table with extension and widening: 1730x1390mm Bleds Ahnhfjpfx Anpep - blade guard - dimensions (L/W/H): 3420x3860x1150mm - weight: approx. 800kg ADVANTAGES – Italian made – with a scoring saw – unpainted – DTR documentation – used saw, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to higher fluctuations)

Condition: excellent (used), Catalog number 8074 TECHNICAL DATA PLANER: Bledpfx Anezuk Ewepep - roller width 410mm - 3-knife roller - silencing comb - roller guard - adjustable angle guide - table length 2000mm - both tables adjustable THICKNESS PLANER: - max thickness of workpiece on the thickness planer 220mm - thickness planer roller guard - from above: - pawls - toothed, twisting infeed roller - pressure rollers - planing roller - pressure roller - smooth outfeed roller - main motor 4kW - electric brake - electric table adjustment up/down - knife setting device - 2 types of rotational speeds 6000/12000 m/min - dust extraction nozzle diameter 2x120mm - dimensions L/W/H 2060x970x1150mm - weight 660kg ADVANTAGES - Italian made - silencing comb - knife setting device - unpainted - excellent condition - used planer/thickness planer Net price: 16900 PLN Net price: 3930 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to higher fluctuations)

Condition: new, functionality: fully functional, input voltage: 400 V, Application of a spiral shaft with replaceable carbide knife inserts, which reduces noise levels by approximately 50% and extends sharpness more than 20 times compared to a conventional knife shaft. A key advantage of carbide inserts is the ability to replace or rotate individual knives in the event of damage, significantly reducing operating costs. Carbide-tipped blades enable chip-free planing and optimal smoothness on any type of wood. Perfectly even thickness planing ensured by the centrally guided column table with central support. Processing accuracy of 0.1 mm, adjustable via a digital indicator on the handwheel. High working comfort due to the noise-reducing guard. Precision-ground thicknessing table for workpieces up to 230 mm in height. Standard equipment includes table extension with integrated rollers. Chain drive ensures precise feed of the workpiece. Numerous safety features: no-voltage release switch, limit switches to prevent unintentional activation, emergency stop switch. Technical specification Thickness planing width: 410 mm Material height clearance (min.): 5 mm Bsdpfx Aoytc Sujnpelp Material height clearance (max.): 230 mm Table size (width): 930 mm Table size (depth): 410 mm Maximum chip removal in thicknesser: 5 mm Minimum planing length: 150 mm Cutterblock diameter: 95 mm Number of knives/inserts on cutterblock: 72 pcs Cutterblock speed: 4050 rpm Feed speed: 6 m/min Extraction port diameter: 100 mm Motor power: 4.2 kW Motor power S1 100%: 3.0 kW Voltage: 400 V Dimensions (width): 1110 mm Dimensions (depth): 710 mm Dimensions (height): 1020 mm Weight approx.: 239 kg Scope of delivery Spiral cutter head with 72 TCT knives Spare TCT knives (5 pcs) Digital thickness table height indicator Table extension with rollers

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Bljdpfevvi I Rex Anpep

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Bljdpfx Anjvwbp Aepsp

Condition: as good as new (ex-display), Code: N0593 Brand: FELDER - AUSTRIA Model: D 963 - CE Standard Automatic thickness planer with Silent Power low-noise spindle and Digi Drive positioning system - CE Standard Blsdszqd D Ejpfx Anpop Working width 630 mm Working height 3–300 mm Max chip removal 8 mm Variable feed speed from 4 to 16 mt/min Planer spindle with Silent Power spiral cutters with reversible HM blades Digi Drive automatic positioning system

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Mouse: Yes Blsdpfx Aevvi Htsnpsp Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld