Strip decoiler

Sestal S.C. 5T - 1250

Condition: good (used), Year of construction: 2005, URBAN Welding and Cleaning Line type CC 16/43-26/23 consisting of Welding Machine AKS 1600 and Polishing Machine SV 430. Nsdsvyqbmspfx Ab Tecn

Condition: used, Year of construction: 1997, functionality: fully functional, type of input current: AC, Glass tempering furnace EFCO, 1500x3000 1500 x 3000 mm, Right – Left Year: 1997. Nedpfoxguqnex Ab Tjcn 415 V, 50 Hz, 3 Ph. In good technical condition. Disassembled and ready for loading.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Nodpotwphwsfx Ab Tocn Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Njdex Trg Aopfx Ab Tocn

Year of construction: 2025, condition: new, functionality: fully functional, Roll forming line for high trapeze profile 135 mm height. Machine is NEW and fully automatic. Ncedpfxjxvz Nco Ab Ten Decoiler 15 t (508/620 x 1500) + Roll forming line + Automatic stacker Automatic feeding into the roll forming, without manual hand operating. Line is installed and ready to inspect and test at anytime.

Year of construction: 2005, condition: used, functionality: fully functional, Roll forming line for high trapeze profile 85 mm height. Machine is fully functional. Line is installed and ready to inspect and test at anytime. Nodpoxvz Hhjfx Ab Tocn

Condition: good (used), Year of construction: 2007, functionality: fully functional, type of input current: three-phase, Lisec glass washing machine RTL-25VN, year 2007, working direction left/right, with 6 brushes for low-e, including 1 hot water tank, 1 sand filter and 1 blower. The machine comes with an inlet conveyor RTVN-32/25WE (3,2 m length) and an outlet conveyor RTVN-16/25ST (1,6 m length). The brushes are still good for at least 1-2 years depending on production. Ncodpfxsyc Utvj Ab Ten The machine was used in small production only. Since it has some rusty spots we can offer for a reasonabe price. The machine is in working order and will be available from our stock in Hofkirchen/Austria end of February 2026.

Condition: like new (used), Year of construction: 2019, Flat glass tempering furnace GLASTON FC Series 2448-380-R Year of production: 2019 (installed 2020) With full convection Ncodpfeyip Diox Ab Ton Maximum glass size: 2400 x 4800 mm Glass thickness: 4 - 19 mm Total power: 1551 kW iLook scanner included Very good and clean condition Excellent condition, very little used As new Available immediately

Condition: good (used), Year of construction: 2011, functionality: fully functional, Profile T93 Entry width 1250 mm Material thickness 0.75 - 1.50 mm Year of manufacture 2011 Nodjxam N Nepfx Ab Tscn

Condition: excellent (used), Year of construction: 2015, Glass tempering furnace GLASTON RC200-2136-380-L Year of production: 2015 With top convection Maximum glass size: 2100 x 3600 mm Minimum glass size: 100 x 250 mm Glass thickness: 4 - 19 mm Total power: 807 kW Nodpfxoyip Hdj Ab Tscn IR scanner Rytek, cullet conveyor Excellent condition Available immediately