Wire EDM Machine

Sodick AQ 327 L

Year of construction: 2005, condition: ready for operation (used), This 3-axis Sodick AQ327l wire EDM machine was manufactured in 2005. Despite a permanent short circuit due to a defective circuit board, it includes replacement belts and has had its axis drives and controls replaced. Operated via a PC monitor, it comes with a repaired computer and SolidWorks software. Consider the opportunity to buy this Sodick AQ327l wire EDM machine. Contact us for more information about this machine. Application Types EDM Gcjdpfjx D Ewtsx Aftea

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm Gcjdpow Ucyuefx Aftja TECHNICAL SPECIFICATIONS Machining type: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table size: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L Axes X, Y, Z, U and V Travel on X, Y, Z axes: 550 x 350 x 400 mm Travel on U, V axes: 550 x 350 mm Anti-collision protection: X, Y, Z, U, and V axes Taper cutting, max. taper: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options: 0.1/0.2/0.3 mm) Wire guide type: closed diamond, gapless Available spool weights and types (DIN standard): 1.6 kg (K 100) to 8 kg (K 160) Available spool weights and types (JIS standard): 3 kg (P3) to 5 kg (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measurement resolution: 0.5 micron Servo motors: AC type Unless otherwise stated, technical specifications are provided without commitment and subject to error or omission.

Condition: used, Year of construction: 1997, Distance between centers 2070 mm Swing over bed 700 mm Gcodjw Rkd Tepfx Aftoa Swing over carriage 430 mm Max turning diameter 460 mm diameter (2000 mm) Spindle bore 90 mm Spindle speeds 14-3200 rpm Z-axis movement 2070 mm X-axis movement 330 mm Turret w/12 stations Tailstock taper MT 5 Control: OSP 7000-L Equipped with: Hydraulic steady rest Chip conveyor 10-20 tool holders 10-20 sets of jaws

Condition: good (used), Year of construction: 1988, Description: Heavy-duty, high-precision horizontal lathe with Rohm hydraulic clamping system, slide with two working positions, Sauter 4-position tool turret, circular turning unit, CNC 6 axes, tailstock, chip conveyor. Suitable for both high-volume material removal and high-precision turning. Machine modified with a 2000 mm face clamping plate and increased in size. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers: 2200 mm Gcjdpfx Afoxmb Adotoa Turning diameter over slide: 1400 mm Turning length: 6000 mm Three-jaw chuck table: 2000 mm Spindle bore: 200 mm Attachment for circular turning Workpiece weight: 4,500–40,000 kg Turret head: 4 positions Spindle speed range: 4 – 400 rpm Main motor Siemens 95.5 kW Maximum torque: 40,000 Nm Overall power requirement: 125 kW Control: CNC SIEMENS 8T, 6 controlled axes Machine weight: 43,000 kg Required space: 13,000 x 4,000 mm

Condition: used, Year of construction: 2004, functionality: fully functional, clamping force: 4,500 kN, screw diameter: 75 mm, clearance between the columns: 800 mm, displacement volume: 1,657 cm³, mold height (min.): 300 mm, ejector stroke: 250 mm, Equipment: documentation/manual, Machine in very good shape. Hopper drier, hopper loader and 3 axis robot included in the price. Gedpfx Aswf Upwoftoca Price can drop if the machine is purchased without them. Still in production and available for inspection. Price loaded on truck.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Transport, Installation, Commissioning – we deliver your machine ready for operation (optional) Machine type: CNC Lathe Manufacturer: Okuma Model: LB400M-1SC Year of manufacture: 2000 Commissioning: 2001 Control: OSP-U100L Spindle hours: 14,502 hrs Country of origin: Japan Delivery time: by arrangement Machine equipment - Hengst Filtration internal extraction unit (Year: 2023) - Touch setter, tool measurement - C-axis (main spindle) - Tool breakage and wear monitoring - 3-jaw chuck, Kitagawa B210, Ø250 - Tailstock available - Coolant supply, including through-tool coolant - Conversational programming IGF - Chip conveyor (scraper type) Technical details - Max. turning length: 650 mm - Max. turning diameter: 420 mm - X-axis travel: 300 mm - Z-axis travel: 675 mm - C-axis travel: 360° - Chuck bore: 72 mm - Spindle bore: 95 mm - Clamping cylinder bore: 95 mm - Tool holder: VDI 40 Gcsdexrtm Sjpfx Aftoa - Tool stations: 12 - Spindle speed: 2,800 rpm - Main spindle power: 22/30 kW - M-spindle – driven stations: 12 - M-spindle: 5.5 kW - M-spindle speed: 3,000 rpm Optional - Organization and execution of transport - Machine installation and setup - Machine commissioning

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Gsdpowr T E Dsfx Afteca Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Maximum workpiece dimensions: 1,550 x 1,200 x 595 mm Maximum workpiece weight: 4,000 kg X and Y axis travel: 1,200 x 800 mm U and V axis travel: 260 x 260 mm Z axis travel: 600 mm Permissible wire diameter: 0.2 – 0.3 mm Simultaneous controllable axes: 4 (X, Y, U, V) Motors: AC motors on all 5 axes Maximum taper: 30° over 100 mm Machine weight: 9,600 kg Filtration system Capacity: 3,000 L Conductivity control: automatic Resin capacity: 14 L Temperature control: automatic Dielectric cooling system: chiller Generator Power circuits: Mosfet AC Minimum roughness: Ra 0.35 Cutting speed: 360 mm²/min (with 0.3 mm brass wire) Automatic wire threading: standard Power supply: 400V three-phase CNC Hardware: Industrial PC, 64 bit Memory: 1 GB Display: 15” TFT touchscreen Data input: keyboard, RS 232, floppy, LAN, USB Positioning system: closed-loop servo-assisted Number of controlled axes: 5 (X, Y, U, V, Z) Minimum programmable increment: 0.0001 mm Machine equipped with: • Optical scales on X and Y axes • 600 mm Z axis • Coil holder for up to 50 kg spools • 1 set of 0.25 mm guides • 1 set of 0.30 mm guides • Taper cutting system • Automatic wire threading and re-threading after breakage • Clamping system: frame with universal drilling • 64-bit CNC with 16 GB memory • AC power generator with anti-electrolysis device • Automatic technology generation • Serial interface, floppy drive, LAN, USB • Dielectric unit with automatic demineralization system • Chiller Year of manufacture: 2018 Gcedpfxsxwmace Aftea

Condition: used, Year of construction: 1998, Mazak SQT30M CNC Lathe, year 1998, Japan C-axis, driven tools Mazatrol T plus Gedpfx Asxutcfeftoca Turning length: 1000mm 12-inch chuck Spindle bore: 98mm VDI50 turret Tailstock Probe Chip conveyor

Condition: good (used), Year of construction: 2008, Cutting hours: 7922 h Fanuc 310 iS-WA CNC X/Y/Z travels: 370 × 270 × 255 mm Max workpiece size: 700 × 600 × 250 mm Tank dimensions: 770 × 600 mm Gedsx Dit Sspfx Aftoca U axis: ±60 mm V axis: ±60 mmMachine fully overhauled by Fanuc