Portal milling machine

STARVISION DX 3220

Condition: used, Year of construction: 2018, operating hours: 10,104 h, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 36 m/min, Equipment: chip conveyor, DOOSAN VC 630 5AX (5-AXIS machining center) Model: VC 630 5AX HEIDENHAIN TNC640 NC Year of manufacture: 2018 Fpodpfxjymc Ngo Apwok Condition: Used, very good, still in production Operating hours: 26,290 h Spindle hours: 10,104 h X-axis: 650 mm Y-axis: 765 mm Z-axis: 520 mm A-axis: +30° to -120° C-axis: 360° Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 36 m/min Maximum table load: 500 kg Spindle: 16000rpm 30/24kW Tool holder: HSK 63A Through-spindle coolant: 18 bar Height: 3295 mm Width: 3200 mm Length: 4585 mm Weight: 13500kg

Year of construction: 2007, condition: used, gear hobbing diameter - external 1200 mm gear hobbing diameter - internal 1200 mm gear hobbing width -max. 260 mm control Liebherr PC-NC max. workpiece diameter 1500 mm table diameter 900 mm table bore diameter 320 mm max. table load 95 kN power capacity 30 kW coolant pump 120 l/min Axial distance between thrust spindle - table 0-820 mm Shaping spindle diameter 125 mm tool taper SK 45 DIN weight of the machine ca. 26 t dimensions of the machine ca. 8,073 x 6,183 x 4,375 m Strokes: - Stroke length min./max. - 0 mm / 270 mm - Stroke length adjustability - 270 mm - Stroke rate (double strokes) - 10 to 270 DH/min Equipment/accessories: - Chip conveyor - Cutting wheel holder SK 45 DIN Fpjdpow Rf S Eofx Apwjk - Cooler - Technical documentation

Year of construction: 2024, condition: new, noris- Extruder MINI ESE 20/25 D Technical data Fpjdjhx Elfspfx Apwjk Screw diameter [mm] 20 Screw length [L/D] 25 Screw speed [min-1] 20-200 min -1 Screw axial pressure [bar] 300 Continuous load 350 maximum Drive Three-phase drive with frequency converter Drive power [kW] max. 2.5 Reduction gear with integrated axial bearing Weight [kg] approx. 160 Dimensions [Lx Wx H] [mm] approx. 1050 x 600x 1590 *) Electrical connection values 3 / N / PE Supply voltage [V] 400 at 50 Hz Control voltage [V] 230 Temperature control electrical resistance heating bands in mica design. Max. processing temperature [°C] 300 Switch cabinet and control panel The electrical installation of the extruder is located in the machine base. The base contains all the necessary switching, control and display devices. The feed zone is water-cooled, the water connection is provided by the customer, a cooling unit for cooling the water is not included in the offer. Extruder tools are not part of the offer

Condition: used, Year of construction: 2012, x-travel 630 mm y-travel 800 mm z-travel 750 mm control SIN 840D sl Siemens B - axis 360 x 0,001 ° A - axis -200 -- +25 x 0,001 ° spindle turning speed - stepless 20 - 18.000 U/min power capacity at 100 % load 28,00 kW power capacity at 40 % load 34,00 KW max. torque at 40% / 100% load 110 / 84 Nm tool taper HSK 63 feed X/Y/Z/-axis 1 - 100.000 mm/min Fpsdpfevxwxvex Apwsk rapid traverse X/Y/Z 100,00 m/min feed capacity X/Y/Z 9 / 6 / 9 kN feed B-axis 1 - 14.400 °/min feed A-axis 1 - 7.200 °/min size of pallet 2x 500 x 500 mm workpiece weight max. 400 kg max. workpiece diameter 800 mm workpiece height max. 800 mm tool magacine with 63 diameter of tools max. 280 mm tool length - max. 550 mm weight of tools max. 15,00 kg total power requirement 65,00 kW weight of the machine ca. 14,00 t dimensions of the machine ca. 5,50 x 3,50 x H3,20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage control, emulsion mist separator, without chip conveyor and without coolant system.

Condition: good (used), Year of construction: 2009, Machine will come with robot . Fpsdpfjxfu S Nox Apwjk 42.000 rpm

Condition: excellent (used), Year of construction: 2001, turning length: 8,000 mm, turning diameter over bed slide: 2,000 mm, workpiece weight (max.): 25,000 kg, turning diameter over top slide: 1,550 mm, Swing over bed Ø: 2000mm Swing over cross slide Ø:1550mm DBC Turning Length: 8000mm Spindle bore: 150mm Spindle power: 95kW Bed width: 1400mm Tailstock spindle Ø: 260Ø Stroke pinole: 200mm Spindle taper: Metric 80Mk Workpiece weight: 25000 Power: 95A Fpedoxxxbzopfx Apwsk Speeds / ranges: 360Rpm Feed rate X-Axis: 0 - 6000mm/min. Feed rate Z-Axis: 0 - 6000mm/min. Length: 16000mm Width: 5000mm Height: 3800mm Weight: 80000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1996, spindle bore: 160 mm, Swing over bed Ø 1040 mm Swing over cross slide Ø 710 mm Swing in the gap Ø Fpjdpjxtbf Eofx Apwsk 1580 mm DBC Turning Length 3000/4500 mm Gap length 1500 mm Spindle bore 160 mm Spindle power 40 kW Bed width 800 mm Spindle taper 6 Mk Workpiece weight 3500 Speeds / ranges 800 Rpm Feed rate X-Axis 10000 mm/min. Feed rate Z-Axis 10000 mm/min. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, table length 400 mm table width 300 mm x-travel 300 mm y-travel 250 mm z-travel 250 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2000 x 1200 x 2500 mm Fpedpfxevwgq Se Apwsk The machine is supplied with a wide range of accessories

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] Fpjdpfx Apsuhbxajwjk EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: excellent (used), Year of construction: 2004, winch inkl. lifting capacity max. 2t. auf 2,7 Meter lifting capacity max. 1 Tonne auf 5,3 Mete Number of working hours 270 h electrical ja Fjdpfsq N E U Aex Apwspk