Thicknesser, planer

Steton 630 16/21

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: Dksdpfxjw I Uxcs Affek - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Dedpfemt Hhwjx Affjkk Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Safety standard CE mark Total installed power 20 KW

Condition: used, Thickness planer: Max planing width: 400 mm Max planing height: 240 mm Min length of planed workpiece: 200 mm Cutter shaft diameter: 700 mm Number of knives: 3 Cutter shaft speed: 5000 rpm Manual adjustment of working height Jointer: Total table length: 1810 mm Adjustable tables Cutter shaft noise suppression Cutter shaft guard Extraction port: 2x120 mm Dkjdoxwvqdepfx Affsk Tilting fence Supply voltage: 400 V Motor power: 5 kW Overall dimensions: Length: 2030 mm Width: 800 mm Height: 1160 mm

Condition: new, Year of construction: 2026, Planer-thicknesser – versatile woodworking machine A planer-thicknesser is a versatile woodworking tool that allows for flattening, thicknessing, and smoothing wood surfaces. Ideal for carpentry and furniture manufacturing, it enables precise planing, edge processing, board production, creation of joinery components, and preparation of materials for gluing. This is a stable machine equipped with a high-quality cast iron table, cutting knives for material removal, an electric motor, and convenient adjustments that make it easy to operate. Also known as a jointer, the planer-thicknesser is designed for initial processing of both rough and hard wood, as well as soft lumber. Its purpose is to level, smooth, and bring wood to the desired thickness through mechanical processes. It’s especially valuable in carpentry and furniture production, where precision and repeatability are essential. Stable construction with enhanced weight for vibration resistance The machine weighs 170 kg and features wide, ground cast iron tables (250 mm), ensuring excellent stability and safe operation. Additional rubber feet allow vibration-free operation. VERSION with a high-performance motor – Total power (S6): 2.6 kW The PT260 planer-thicknesser stands out with its exceptionally powerful motor: Total power (S6): 2.6 kW Continuous power (S1): 2.0 kW This is significantly more than what many competitor machines offer, translating into better performance and more stable operation. Stronger motor = better efficiency and easier processing of hardwoods. Hardwoods require more power to process, and this motor handles them with ease. Effortless conversion from jointer to thicknesser Switching between jointer and thicknessing functions is quick and simple. It involves unlocking the eccentric clamps, lifting the tables, and repositioning the dust extraction hood. Precision and ease of adjustment Smooth table height adjustment with scale Central column-mounted thicknessing table with handwheel for height regulation 700x150 mm aluminum tilting fence with scale strip for accurate angle settings from 90° to 45° Technical Specifications: Parameter Value Cutter block diameter 75 mm Cutter block speed 4000 rpm Dust extraction port diameter 100 mm Tilting fence angle range 90° – 45° Number of knives 3 Knife dimensions 250x30x3 mm Table dimensions 1100x250 mm Thicknessing table dimensions 600x248 mm Max. planing width (jointer) 250 mm Max. planing depth (jointer) 5 mm Max. thicknessing depth (single pass) 2.5 mm Max. cutting depth (thicknesser) 3 mm Max. workpiece height (thicknesser) 180 mm Thicknesser feed rate 6 m/min Fence dimensions 700x150 mm Machine dimensions (L x W) 1100x250 mm Weight 170 kg Motor power S1: 2.0 kW / S6: 2.6 kW Power supply 400 V Dkjdpfx Aewt Axpeffsk

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW Dedpfehturcox Affekk refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software incl. exhauster to test under power ! option: warranty, setup, training

Year of construction: 2025, condition: new, Ultrasonic bath UEC 300 is industrial solution for cleaning large and heavy parts that are very dirty. The machines contain a pneumatic elevator capacity of 200 kg. Working frequency is 28kHz with sweep technology. The machine consists of a main ultrasonic bath with three side ultrasonic Dkedpfxegd Uifj Affjk piezo transducers and second, overhead bath with oil separator. Control is with high quality touch screen HMI with 3D display notifications. Complete bath is made from acid resistance stainless steel AISI304 thickness 2mm. ----- Characteristics : Platform size : 900x570mm Maximum load : 200 kg. Useful height : 400mm Ultrasonic power : 3kW(6kWp-p) Ultrasonic frequency 28 kHz with sweep mode Heater power : 9kW FEATURES : Touch screen 7 " with 3D notification Automatic water filling system. Automatic elevator mode work Level sensor Elevator position sensors Cover sensor Warranty : 2 years. WE HAVE AND OTHER MODELS ON STACK

Condition: used, Heavy-duty thickness planer Panhans 436 Planing width: 630 mm Planing height: 250 mm Dsdpjx U S Rdefx Affokk Electric height adjustment with tenth-millimeter touch button – digital Tersa cutter block Table with four-way guidance Main motor 7.5 kW Feed speed: 7 + 14 m/min Segmented infeed and outfeed rollers made of rubber, oscillating Segmented pressure beam made of solid aluminium – oscillating Machine is FULLY REFURBISHED IN WORKSHOP, IN EXCELLENT CONDITION Available from stock Lieboch

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical data: - Fixed milling spindle; newly fitted bearings - with table extension and extendable frame support 2500 mm - Motor 5.5 kW - Speeds 3000/4500/6000/8000/10000 rpm - Milling fence with 2 adjustment options: - complete fence - rear take-off jaws - Extraction hoods: 2 x 120 mm - Automatic motor brake - Right/left rotation - with Haffner power feed with 4 rollers Dkodpfow I Uinsx Affok Weight approx. 700 kg Availability: by arrangement Location: Flörsheim

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm throat 185 mm Dkodpfx Afovh Nbbsfek quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm total power requirement 0,37 kW

Condition: new, functionality: fully functional, Year of construction: 2026, Available in stock Capacity – 500 l. Diesel engine. Self-Propelled. Diesel Burner. Engine fuel tank – 50 l. Oil tank – 30 l. Thermal oil heater – 80 l. Electrically heated hose – 6 m. Heating the mastic through the thermal oil (thermal oil jacket). Dksdpfx Afjd Swd Uefek