CNC Milling Machine

Strojtos FGS 63 NCP

Condition: excellent (used), Year of construction: 2009, operating hours: 12,959 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 12,000 rpm, total height: 2,450 mm, total width: 2,400 mm, total length: 3,100 mm, table width: 630 mm, table length: 630 mm, table load: 350 kg, overall weight: 6,800 kg, Kunzmann WF 650 5-Axis Simultaneous Machining Center (2009) Manufacturer: Kunzmann Type: WF 650 5-Axis Simultaneous Machining Center Year of manufacture: 2007 Commissioned: 2009 Condition: Used, very good Machine ON: 46,181 h Spindle hours: 12,959 h Control: Heidenhain iTNC 530 Software Package 1 for iTNC 530 X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Vertical milling head tilting range: -5° + 95° NC built-in rotary table Ø 630 mm Hnedpsxwl T Ujfx Ad Rsl Table load: 350 kg Spindle speed: 12,000 rpm Tool holder: SK40 Tool changer with 20 spindles Tools Internal coolant supply: Tool clamp with coolant supply and blow-out device through the spindle. Flow rate 25 l/min at 40 bar Optional water/air through the spindle Paper belt filter Controlled CNC milling head (B-axis) Mounting kit for TS 640 probe head 3D probe with infrared transmission Dimensions LxWxH approx.: 3.1 x 2.4 x 2.45 m Weight approx. 6,800 kg Coolant system LxWxH approx.: 1.6 x 2.00 x 0.50 m Scope of delivery: – Documentation – Machine feet – Machine light

Year of construction: 1980, condition: ready for operation (used), Max. rotational speed: 2500/min, feed rate: 5-500mm/min. Hedpsfdzzyjfx Ad Rsnl

Condition: used, Year of construction: 2008, operating hours: 6,848 h, functionality: fully functional, machine/vehicle number: 11580008023, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, total height: 2,260 mm, total length: 22,950 mm, total width: 2,100 mm, table width: 600 mm, table length: 1,000 mm, table load: 200 kg, rotary table diameter: 600 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool length: 315 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Deckel Maho DMU 60 is a universal 5-axis CNC machining center designed for precise milling and complete machining of complex components. This machine is part of the renowned DMU series by DMG Mori (formerly Deckel Maho) and is widely used in toolmaking, mechanical engineering, mold making, as well as the aerospace industry. Hnedpfx Adoyt Ibnj Rsl Thanks to the swiveling milling head (B-axis) and NC rotary table (C-axis), workpieces can be machined on five axes, enabling the production of complex geometries in a single setup. Previous application conditions: General machine/tool parts in steel, aluminum, cast iron, etc. Heidenhain iTNC 530 control HSK-A 63 tool holder The stated price is exclusive of dismantling, packaging, and shipping. Sale is from location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes: X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable: Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle: Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system: Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment: Electronic Handwheel Hedpfxowhdhzs Ad Rsnl Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling: Cooling through the Spindle Center bar: 40 BAR Tank capacity: 980 High-pressure bar: 40 BAR Machine running times: Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight: Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000.

Condition: excellent (used), Year of construction: 2000, turning length: 2,000 mm, spindle bore: 105 mm, spindle motor power: 21,000 W, total height: 2,100 mm, total length: 4,500 mm, total width: 2,000 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, turning diameter over bed slide: 620 mm, workpiece weight (max.): 2,500 kg, overall weight: 7,800 kg, Very little hours Hydraulic tailstock CE Safety doors Multi Fix Tool holders system  D1 Chip conveyor Swing over bed Ø: 620mm Swing over cross slide Ø:370mm DBC Turning Length: 2000mm Spindle bore: 105mm Spindle power: 21kW Tailstock spindle Ø: 100Ø Stroke pinole: 200mm Spindle taper: 6Mk Hsdpeyuchrsfx Ad Renl Workpiece weight: 2500 Speeds / ranges: 1600Rpm Feed rate X-Axis: 8000mm/min. Feed rate Z-Axis: 8000mm/min. Length: 4500mm Width: 2000mm Height: 2100mm Weight: 7800kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2018, MAS - MCV 800 QUICK - 2018 - system HEIDENHAIN TNC 620 - workpiece and tool measuring sonds HEIDENHAIN TS/TT 460 - table 1000x500 mm - table load 600 kg - X/Y/Z=800/500/550 mm - 12000 RPM - spindle taper ISO 40 - spindle through cooling 20 bar - ATC 24 - in 1 shift use - fully working - very good technical conditions Hnsdpfx Adeyl Sruo Rsl - under power

Condition: used, Year of construction: 2003, operating hours: 64,930 h, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 400 kg, rotational speed (max.): 12,000 rpm, Required space: approx. 3.5 x 2.5 x 2.5 m (L x W x H, without chip conveyor) Hnedey Ncnpepfx Ad Rol Machine weight: approx. 6,300 kg

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,064 mm, workpiece weight (max.): 250 kg, input voltage: 230 V, type of input current: AC, laser power: 20 W, total height: 2,700 mm, working range: 175 mm, height adjustment type: mechanical, scan area length: 175 mm, scan area width: 175 mm, table length: 1,200 mm, table width: 1,200 mm, space requirement height: 2,700 mm, laser wavelength: 1,064 nm, working height: 500 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, IPG Fiber Laser Type M · Laser Class 1 · Made in Germany XXL Workstation – Custom Construction: Hjdpsyimz Aefx Ad Rjnl - Standing workstation with table height designed for standing operation - Folding sliding door, right side fully glazed with safety glass, class LK 1 - Bright work light - Stainless steel suction nozzle DN50 - Heavy-duty drawer system: up to 250 kg, internal dimensions 1.2 × 1.2 m - External position: for loading/unloading - Internal position: for laser operation - Programmable auto-start, magnetic switch as interlock - Slots on both sides for extra-long parts, beam protection brush - Roof height for parts up to 500 mm under 254 mm lens - Z-axis manual, base value storable - Machine external height: approx. 2.50 – 2.70 m Laser – IPG MOPA: - Diode-pumped ytterbium fiber laser - Power: 20 W - Pulse duration adjustable (also for plastics) - Wavelength: 1064 nm - Pilot laser + 2 distance lasers (650 nm,

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, table load: 450 kg, overall weight: 4,000 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis KOVOSVIT MAS MCV 750 was manufactured in 2004. It features an X-axis travel of 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine includes a table size of 1000 x 500 mm and a maximum spindle speed of 10,000 RPM. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 750 vertical machining centre we have for sale. Contact us for further details. • Table Dimensions: 1000 x 500 mm • Automatic Tool Changer (ATC): 20 positions • Rapid Feed Rate (X/Y/Z): 30 / 30 / 25 m/min Technical Specification Taper Size ISO 40 Hnedpfx Adsy Eq Rks Rel

Year of construction: 1990, condition: used, spindle taper 2 x SK 40 forward bearing diameter 110 mm milling head speed 100 - 4500 U/min milling drive 5,1 kW workpiece length - max. 830 mm workpiece dia. with double equipment max. 135 mm taper diameter 78 g6 mm centre height 260 mm turning speed range - stepless max. 15 U/min distance of spindles 135 mm spindle nose DIN 55026 Gr. 5 stroke of workpiece slide 810 mm Feed speed max. 6 m/min. Hnodpoyt Rwrjfx Ad Rjl surface area 200 x 1750 mm stroke of tool slide 120 mm Feed speed max. 2 m/min. column movement 200 mm tailstock quill stroke 100 mm morse taper 3 MK centre height 260 mm axial distance of the quills 135 mm passage of steadyrest 40 - 80 mm control SIEMENS SINUMERIK 810 weight of the machine ca. 6,5 t with SIEMENS-control SINUMERIK 810/820 acc.: NC-dividing unit with back stop, various toolholders, steadies, running centres, coolant