Drying tunnel

Tesoma COMPACT / E-15-H-HS

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar Rsdpfxeuf Sy Ae Ag Ijp

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Rsdpoykr Rzjfx Ag Isp

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Rodpfx Agew R Enms Ijp Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, total length: 3,000 mm, total width: 1,500 mm, total height: 2,200 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 1,500 kg, 1. very precise, fully automatic screen printing machine with an automatic feeder feeder that positions the sheet with an accuracy of 0.08mm. The integrated CCD camera recognizes a hole or a print mark and positions the screen with an accuracy of 0.02mm to the print mark. 2. welded steel frame and highly dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, controlled pneumatic squeegee pressure compensation, which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material. Redpfx Agjqu Udwj Isp 6. the material is kept in a floating state during application and removal, which guarantees scratch-free transportation.

Year of construction: 1999, condition: good (used), Specification: Adjustable bed 2 foil pulls Variable Accel / Decel and delay pull pulse – to provide accurate foil pull and prevent preheating of foil. Foil Countdown in metres – this system will provide a warning that a foil change is required and is controlled via the touchscreen. Electronic front and sidelay sensors Rjdpfxshy N Uho Ag Iep Auto impression Preloader Machine has been completely built by Starfoil. Condition as is.

Condition: repair required (used), functionality: fully functional, machine/vehicle number: 8500243, Year of construction: 2017, total length: 1,400 mm, total height: 1,100 mm, total width: 1,260 mm, type of input current: AC, overall weight: 430 kg, input voltage: 230 V, input current: 13 A, input frequency: 5,060 Hz, ambient temperature (min.): 18 °C, ambient temperature (max.): 25 °C, With the Stratasys J750/J735 3D printers, you can streamline and reduce the cost of producing models from different materials on the same build tray in the same print job. The J750/J735 3D printers allow you to assign colors to parts of a model at the design stage (using CAD software), save the model as a VRML file, and have the model printed in the desired colors. The Stratasys J750 has a build area of 490 x 390 x 200 mm (19.3 x 15.35 x 7.8 in). Spare parts and materials are available. Rjdpfxevu Rias Ag Ijp The machine has only been used internally, primarily for product development.

Year of construction: 2004, condition: used, Sewing machine Meccanotecnica Aster 160 OS Year: 2004 Description: Rodeykz Ipepfx Ag Ijp - Colour monitor with touch screen - Feeder - 4 + 4 opening possibilities - Belt delivery Max. mechanical speed: 150 cycles/min Maximum product size: 320 x 420 mm Minimum product size: 75 x 150 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: like new (used), functionality: fully functional, overall weight: 277 kg, total width: 650 mm, total length: 1,940 mm, total height: 1,050 mm, Plockmatic PBM 500 including BookFold Module and Trimmer Module. This booklet maker is in very good, lightly used condition! Rjdpsyi Ta Usfx Ag Isp Counter readings: PBM 500: 86,305 BookFold Module: 173,595 Trimmer Module: 204,306 - Produces professional booklets inline or offline with stapling and folding. - Capacity: up to 50 sheets of paper (80 gsm) for folded booklets of approx. 200 pages - Supported paper sizes: width from approx. 206 mm to 320 mm, length up to approx. 457 mm - Compatible with A and B formats as well as many custom sizes. Looking for other configurations on the machine? We are flexible and can tailor the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical team. If you would like further information, please feel free to contact us. Worldwide shipping available.

Year of construction: 2020, operating hours: 13 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 623, Almost unused Urschel Tanslicer machine. We used it for slicing bread chips, but it can also be used for slicing vegetables, cucumbers, etc. It looks brand new. Originally purchased from Urschel Switzerland. Blades can be exchanged. Rsdjw Afvcepfx Ag Isp

Condition: good (used), Year of construction: 2017, Year of manufacture: 2017 Condition: good Schulze PRETREATmaker IV A unique device for applying a priming liquid before printing textiles. Due to the size of the area on which it is able to apply the liquid (40x60 cm), it is particularly suitable for DTG M2, M3, M4 printers, but of course also for printers with smaller print area, such as R-Jet, Brother GT3, Anajet, TexJet... The advantage is that it does not need a compressor. The machine is equipped with 4 independent and adjustable nozzles (you can apply only a small area e.g. when printing logos on hearts). Spraying time for full 40x60 area - 4,5 seconds. Selectable liquid spray size in 2 cm increments (2 - 60 cm length). Large clear LCD display. 5 storable positions/settings for area and spray quantity. High efficiency and productivity. No compressor required Machine has 4 independently adjustable nozzles (you can only apply a small area e.g. when printing logos on hearts) Spraying time for a full 40x60 area - 4.5seconds Selectable liquid spray size in 2cm increments (2 - 60cm length) Large clear LCD display 5 storable positions/settings for area and spray quantity High efficiency and productivity Rsdpfx Aoufi Uwog Ijp PRETREATmaker IV is a high-end device designed for the professional application of penetrating fluid on textiles. It has an advanced electronic system that allows high performance and easier control during the textile pretreatment process. The clear color touch screen allows you to easily adjust the length and width of the spray and easily set the spray volume. The machine is equipped with four nozzles, each of which can be switched on individually. This allows you to precisely set the area for the application of the priming solution (Dupont Artistri, Image Armor, Brother...), but also saves a lot of priming, compared to applying by hand, using a pressure/air gun. The length of the spray area can be controlled in 2 cm sections, using the touch screen. For setting the amount of penetrating fluid application, 10 values are available. The Pre-treat maker IV also has an automated spray nozzle cleaning process (consumption of approx. 12 ml per hour), which keeps the nozzles clear and prevents drying or blockages. Spray area: 40 x 60 cm Spraying method: nozzles move over the table (inside) Table length: 80 cm Nozzles: 4 pieces Dimensions: T 90 x W 72 x H 48 cm Dimensions (for transport): T 95 x W 80 x H 61 cm Weight: 68 kg Weight (for transport): 86 kg Connection: 220/230 or 110/120 VAC (automatic switch) Power consumption: 150 W Operating pressure (before coating): max. 7 bar Menu: 5 languages: German, English, French, Italian, Polish Measurement: "cm" or "inch" Included: spare nozzle, spare filter and ultrasonic cleaner Other features: galvanized and powder-coated housing