Screen Printing Machine

Thieme 520 H

Condition: good (used), Year of construction: 2000,  Printing technologies installed: • 3 x Flexographic printing units • 3 x Screen printing units • Gravure capability (cylinder formats available) Maximum mechanical speed: 150 m/min Maximum web width: 417 mm Minimum web width: 166 mm Maximum print width: 407 mm Substrate thickness range: approx. 0.008 – 0.18 mm  Repeat ranges Flexo: 228.6 mm (Z72) up to 609.6 mm (Z192) Screen: 269.875 mm (Z85) up to 533.4 mm (Z168) Gravure: 304.8 mm (Z96) up to 609.6 mm (Z192)  Die Cutting Section Flat die cutting: Die cutting width: 407 mm - Repeat: 254 mm (Z80) up to 609.6 mm (Z192) Rotary die cutting capability installed. Unwind / Rewind Section Unwinder: • Martin nonstop unwinder • Core diameters: 76 / 152 mm • Maximum unwind diameter: 1000 mm • Maximum roll weight: approx. 485 kg Rewinder system installed. Electrical Data Nominal current: 500 A Dkedpsylypujfx Apwer Connected load: 275 kW General Condition The machine is designed for web label production and represents a robust hybrid combination press with flexo and screen printing capability. The press is available for inspection by appointment.

Condition: used, Year of construction: 1997, Technical data: Material width: min. 130 mm, max. 270 mm Material width: max. 244 mm Dkjdpfexpilrox Apwer Print repeat length: min. 101.6 mm, max. 254 mm Machine components: Corona treatment 5 × offset printing units 1 × flexo printing unit Flat hot foil stamping unit Flat die-cutting unit

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Dkjdpfer Izhuex Apwsr Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition.

Condition: good (used), Year of construction: 1996, GALLUS Arsoma EM 280-8 Colour Flexo Printing Press Model: EM280 Year of manufacture: 1996 Configuration: • 8 flexo printing units • 8 hot air dryers • GEW UV curing system (1x) • Turn bar (web turning device) • Sheet delivery (stream delivery) • BST Powerscope 4000 web inspection system Technical Data (approx.): • Max. web width: 280 mm • Print width: approx. 260–270 mm • Repeat length: approx. 250 – 520 mm • Unwinder: max. roll diameter approx. 800–1000 mm • Rewinder: max. roll diameter approx. 800–1000 mm • Mechanical speed: up to approx. 120 m/min • Substrate range: self-adhesive labels, paper, film and flexible packaging materials The machine offers a robust and proven solution for label production, providing high flexibility due to the combination of conventional drying and UV curing systems. This enables the processing of a wide range of materials and applications. A key advantage of this press is the included tooling package, which significantly reduces the need for additional investment and allows for immediate production start-up. Scope of delivery includes: • Printing cylinders • Anilox rollers • Magnetic cylinders This added value ensures high versatility and cost-efficiency for future production needs. Dedoy A Nhiepfx Apwjkr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, The machine is a few years old, but has rarely been used. It can be inspected at our location in Weesp. Dedpfx Ajxg Hxwspwekr

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, year of last overhaul: 2025, Thieme model 3050L screen printing machine, fully refurbished. Format: 140x180 Year: 2007 Condition: Final stage of refurbishment Djdpfx Apjxk T D Ijwekr Sartech is a company specializing in screen printing, automation, and robotics solutions, as well as the manufacturing of UV (electronic) or hot air tunnels.

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, MACHINE BUILT 2009 / COMPLETELY REFURBISHED 2025 Ideal for collating calendars, folded sheets (signatures), cardboard boxes of all kinds, packaging, ... Type - MKW RAPID UT - System Belt conveyor table 32- Number of stations B3 - Format 35 x 50 cm GS - High pile up to 70 cm 1 Automatic Collator Type MKW RAPID UT / B3 / GS - With 32stations Belt-Conveyor-Table - Sheet sizes 10 x 14 cm up to 35 x 50 cm - High-Pile version with max. 70 cm stacking height - Paper weights up to 1.000 g/m² - Single sheets, folded sheets (signatures), carton, plastic foils, … - Belt conveyor transport table for continuous sheet transport - Timing belts radially adjustable for optimal sheet delivery - Timing belts radial adjustment via electrical clutches - Foldable transport fingers - Adjustable tilt suction heads for optimal pick up of sheets - Pressure-vacuum pump in sound-absorbing housing - Blown air for accurate sheet layering - Adjustable sheet layering - Electronic machine control by Industry-PC system - High quality color display for reliable and clear operation - Self-learning electronic missing/double sheet control per station - Missing/double-sheet control by Infrared sensor MKW IR - Tandem function for double use 2 : 1 (TANDEM-Mode) - Dynamic station selection for optimized pre-loading for the next job - Inserting function at any station possible - Alternating insert function at any station possible - Alternating cardboard function at any station possible - Speed display infinitely adjustable - Advance counter with adjustable stop for number of sets and stop time - Jam control along the transport table - Active safety: Transparent safety hoods made of unbreakable PolyC. - Ejector unit inclusive additional station at the delivery AW 3 incl. (for ejection of faulty sets) Dodpfxexdy R Ij Apwokr - Raising unit for delivery rollers AHB incl. (for different paper formats in one set and signatures) - Delivery Jogger-system integrated ASS i 3 incl. (for normal and criss-cross delivery, incl. X-Jogger) - Hand feeding station at left side HV 3 (incl. automatic station-control in case of operating error) 1 Prepiling-System for all stations Type MKW VS 3 - Mobile stacking pallets - Format up to 35 x 50 cm - 30 units fixed installation in front of the machine - 2 mobile stations in front of the collator (15+2+15) - 2 mobile pallets per station inclusive 1 High-Pile Non-Stop Delivery Unit Type MKW RAPID TD-3 - Automatic high-pile delivery up to 30 cm piling of sets - Format up to 35 x 50 cm - Staggered delivery of sets - Stacking function adjustable: straight stacking or offset function - Automatic delivery onto buffer belt - Buffer belt lenght approx 2,00 m - Counter function for pile height - Text display for operation and monitoring Warranty Time 12 month spare parts warranty (critical spare parts pack shipped with machine) (not inclusive are belts, bulbs, rubber parts, suckers, …) Package of free spare parts A package of the most important spare parts and consumables like rubber parts will be send together with the machine. Validity of offer Subject to prior sales Detailed offer on request

Condition: good (used), Year of construction: 2007, NILPETER FA-4 Servo-Driven UV Flexo Printing Press Year: 2007 Web width: 420 mm / 16.5” Number of colors: 8 flexo printing units Technology: Servo-driven UV flexo press Max. mechanical speed: approx. 175 m/min Application: Multi-substrate label and packaging production Condition: Used, offered “as is” Availability: Subject to prior sale Machine configuration: Unwind section: • Unwinder with reel lift • Web guide system • Splice table • SDI web cleaner • Vetaphone corona treater Printing and web handling: • 8 x flexo printing units • Servo-driven press technology • Automatic registration system • Chill rollers with chiller • 8 x IST MBS 5 UV dryers • Delam/relam unit with web turn bars Additional converting/finishing equipment: • 2 x rail-mounted unwind/rewind units for cold foil or lamination • Back slit unit Dsdpfx Apjy Tytkswekr • Rotary die-cutting station • Waste matrix rewind • Product rewind with lay-on roller • BST web inspection camera

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, product width (max.): 433 mm, working width: 430 mm, • 8 UV printing units • 2 rotary top loading die-cutting units • Waste shaft with additional pressure roller • GEW UV curing system • 2 additional hot air curing units • Sensotec printing register system • Insetting system • Cooled anvil drums • 2 rail-mounted cold foiling or laminating sections with interchangeable positions • Aditional Oil-heated rotary Hot-foil unit • Belt Conveyor for sheet output • Automatic sheet collection and stacking table/elevator • Splise recognition sensor • Web breakage sensor Dedpoymr Sqjfx Apwekr • End of the roll sensor • Erhardt+Leimer Web guiding system • TekNek web cleaning unit • Slitting knives • Rotary Embossing Cylinder 31 anilox roller 550 aluminium printing cylinders 13 magnetic cylinders 3 cross cutting cylinders

Condition: used, functionality: fully functional, We are selling our small screen printing machine, which is still in operation, due to downsizing of our machinery fleet. The machine is fully functional and can be inspected. Dksdpfx Apoyrbvpewsr