CNC bench drilling machine

TOS VARNSDORF WHN 13

Condition: good (used), Year of construction: 2013, Ref. -No.: 10484 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: HEIDENHAIN 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Dodpfx Adjw Iu Nhs Njck Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1.400 RPM Spindle Speed: 2000 RPM Further information: The control system was converted to a HEIDENHAIN 530i in 2013. All drives were upgraded to digital. The thrust bearing tower was also replaced in 2013. Accessories: 3D probe - Heidenhain, large spindle support Additional table dimensions: 3850 x 900mm 1x axis module Heidenhain (overhauled), 1 new axis module is installed in the machine. Newly packed spare parts, covers from the machine. All bearings have been replaced by the machine in recent years. Tools and milling cutter heads are available. Machine is from 1st hand. The machine is still under power and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2013, Traverses X Y Z; 500 x 450 x 400mm, table size 630 x 500mm, table load 200 kgs, B axis -5/+110 degrees, C axis 360 (0.001 degrees), spindle speed 12,000rpm, spindle taper Iso 40, 30 station ATC, Siemens 840D control, swarf conveyor. Dedpezicmpofx Ad Nsck

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. Dcedpozc D E Ijfx Ad Nsk - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: good (used), Year of construction: 2003, feed length X-axis: 3,500 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,250 mm, total length: 7,200 mm, total height: 5,300 mm, table width: 1,800 mm, total width: 6,800 mm, table length: 2,200 mm, workpiece weight (max.): 12,000 kg, Table type boring mill TOS VARNSDORF - WHN13CNC MACH-ID 9629 Make: TOS VARNSDORF Dodpfx Adoy T E Its Neck Type: WHN13CNC Control: HeidenHain TNC430 Year: 2003 1e owner machine ca 16.000 Spil hours Chip conveyor Under power  X - Travel: 3500mm Y - Travel: 2500mm Z - Travel: 1250mm W - Travel: 800mm Table Length: 2200mm Table Width: 1800mm Table load: 12000 Speeds / ranges: 2800Rpm Power: 37kW Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Feed rate W-Axis: 10000mm/min. Number of controlled axis:5 Length: 7200mm Width: 6800mm Height: 5300mm Weight: 36850kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, functionality: fully functional, DMG DMU 50 3+2 axes SPINDLE overhauled 01/2026 Control system: Heidenhain iTNC 530 Hours: 11,275 program hours x-axis travel: 500 mm y-axis travel: 450 mm Djdpfx Adsza T A Dj Nock z-axis travel: 400 mm Control system: iTNC 530 Heidenhain Spindle speed range – main spindle: 20 – 10,000 rpm Tool holder: SK 40 DIN 69871 Table surface: 700 x 500 mm Max. table load: 500 kg T-slots: 7 x 14 x 63 mm Number of tool positions: 30 Max. tool weight: 6 kg Rapid traverse rate: 24 m/min Feed force: 4.5 kN Feed rate: 1 – 24,000 mm/min Total power consumption: 26 kVA Machine weight: approx. 4.5 t Space requirement: approx. 4.5 x 3.5 x 2.3 m Chip conveyor Handwheel Measuring probe Coolant gun Available immediately

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm Dsdpfx Aoy H Dahod Neck W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,600 mm, Travel paths X-axis travel: 3500 mm Y-axis travel: 2500 mm Z-axis travel: 1600 mm Worktable NC rotary table: 2200 x 1800 mm Max. table load: 12,000 kg Max. spindle speed: 2,500 rpm Tool holder ISO-50 Dedpeyifpfefx Ad Nsck Accessories: - Chip conveyor

Condition: excellent (used), MAZAK INTEGREX 400-3S is a CNC Turning-Milling-Drilling Center designed for precision, high accuracy and reliability. Capacities: distance between centres 1500 mm, swing 760 mm, max turning length 1524 mm, bar passage 102/77 mm, tool magazine 40 stations (Ø max 90 mm, L 400 mm). Main specs: main spindle A2-8 stepless 35–3300 t/min 30 kW 1200 Nm; back spindle A2-8 35–4000 t/min 26/22 kW 500 Nm; milling spindle CAPTO C6 15–12000 t/min 18.5 kW 120 Nm. Travels X630 Y±115 Z1585 mm; feeds 0–8000 mm/min; rapid X/Z 38 m/min Y26 m/min; weight ~13300 kg; footprint 5110x2196 mm; height 2798 mm. Equipment: coolant 444 l (15 bar through milling spindle), Forkhardt 3-jaw chucks Ø400/315 mm, linear scale for X, RS232, PCMCIA, spindle sync, chip conveyor, synchronized tapping, foot pedal. Enables tight tolerances; typical applications: automotive, aerospace, medical, machine tools, watchmaking. Dedpfx Adoyxn H Ne Neck

Condition: ready for operation (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, table load: 12,000 kg, spindle diameter: 130 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, table length: 2,200 mm, table width: 1,800 mm, feed length X-axis: 3,500 mm, feed length Z-axis: 1,250 mm, Spindle diameter: 130 mm Dodpsy Hgvrofx Ad Nsck X-axis travel: 3,500 mm Y-axis travel: 2,500 mm Z-axis travel: 1,250 mm B-axis (table): 360º W-axis travel (quill): 800 mm Table size: 2,200 x 1,800 mm Max. table load: 12,000 kg CNC: Heidenhain 424 M Spindle speed (2 ranges): 10 - 2,500 rpm Coolant tank: Yes Tool holder: BT 50 Weight: 42,000 kg Dimensions: 6,460 x 6,960 x 4,400

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: 07-16 1990, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, A machine in good condition, as shown in the pictures, manufactured in 1990 and equipped with NCT 90 control. It has been used very little and is being sold due to underutilization. The total weight of the machine is 33 tons. The machine is fully operational. Disassembly and transportation are the responsibility of the buyer. Dcsdpfjw Sx Agox Ad Nsk

Condition: good (used), Year of construction: 2008, Ref. -No.: 10564 Manufacturer: TOYODA Type: FH 630 SX Year of construction: 2008 Type of control: CNC-Steuerung Control: Fanuc 31i - A Storage location: Halberstadt Country of origin: Japan Serial no.: NS2XXX X-Travel: 1000 mm Y-Travel: 800 mm Z-Travel: 850 mm B-Axis: 360 ° Max. Workpiece Weight: 800 kg Max. Tool Weight: 27 kg Max. Tool Length: 545 mm Max. Tool Diameter: Ø 120 mm Max. Size Of Workpiece Lxwxh: Ø 1000 x 1000 mm Tool Taper: BT - 50 Tool Piece Magazine With: 60 Pcs./pcs. Spindle Speed: 6000 RPM Machine length: 7000 mm Machine width: 3500 mm Weight Of The Machine Ca.: 20,1 t Further information: - Equipped with IKZ and chip conveyor - NC rotary table 360,000 * 0.001° Machine can be inspected under power by arrangement. Dedpfjxvw Izsx Ad Njck