ALB. TRIPET SA. MAR 200

Tripet MAR 200

Condition: repair required (used), TSCHUDIN HTG400 sold as a parts donor. Mechanically, the machine is in good condition; electrically, it must be checked and repaired. Pedpsyt E Irefx Amiogk The drive motors are functional. The same applies to the internal cylindrical grinding machine TRIPET AR 200 with internal grinding attachment and face grinding attachment. Both machines are being offered for parts.

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Workpiece Workpiece drm over bed 590 mm Pgsdpsx D Sc Nofx Amiok Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: excellent (used), Star SA-12 Swiss-Type Lathe Technical Specifications Rapid feed (X, Y, Z, ZB): 370 mm Maximum turning feed (X, Y, Z, ZB): 270 mm Smallest input unit (X, Y, Z, ZB): 120 mm Machining Capacity Pgedpfewi Ty Ajx Amijk Maximum turning diameter: 13 mm Maximum headstock stroke: 140 mm Maximum drilling capacity: 7 mm Maximum tapping capacity: 7 mm Maximum thread cutting capacity: M6 x P1.0 Main Spindle Spindle speed: 500 – 12,000 rpm Drive: Spindle drive Main spindle motor: 2.2 / 3.7 kW Main spindle indexing angle: 1° or 15° Main spindle bore: 20 mm Tool slide Type: Linear slide Number of tools: 6 tools Number of driven tools: 3 tools (collet: ER 11) Driven tools Spindle speed: 1970 / 2330 rpm Max. drilling capacity: 4 mm Max. milling capacity: 4 mm Pick-up spindle Max. clamping diameter: 13 mm Max. part length for forward ejection: 85 mm Max. unclamping length: 30 mm Spindle speed: 500 – 8000 rpm Pick-up spindle motor: 0.5 kW Tool selection: 4 tools Max. drilling capacity: 4 mm Max. tapping capacity: M3 x P0.5 Power supply Voltage: 3-phase 200/220 V Frequency: 50/60 Hz Power: Average: 6.0 KVA SCOPE OF OFFER Among other things: (list not exhaustive): STAR SA-12 Swiss-Type Lathe Control: Fanuc Series 18i-T Fire Extinguishing System Coolant Tank Transformer LNS Bar Loader Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: good (used), Year of construction: 2000, CNC surface and profile grinding machine Fabr.Ziersch & Baltrusch Type:PROFITLINE ZB 62 NC Year of manufacture.2000 Pgedpsfrbckofx Amiek grinding range : 600X270mm Electromagnet with continuous transverse pole pitch 600X200mm. P = 4 mm Wet grinding device, with automatic paper belt filter, machine trough. Complete machine documentation available.

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg Pgjdpfsb Ez R Ujx Amiek

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher Pgedpeu E U Ufsfx Amiok - Parts conveying strip

Condition: excellent (used), Year of construction: 2014, Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with one chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis resolution (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter of counter spindle: 32 mm Max. drilling diameter front side: 12 mm Max. tapping diameter front side: M10 Max. tapping diameter rear side: M10 Spindle through-hole diameter: 37 mm Number of tool positions: up to 25, depending on configuration Rapid traverse X/Y/Z axes: up to 32 m/min Pgjdpfsydaadjx Amijk Bar length: 2,500 mm Coolant tank capacity: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m, 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1 travel: 108 mm Y1 travel: 347 mm Z1 travel: 325 mm X2 travel: 120 mm Y2 travel: 44 mm Z2 travel: 212 mm X3 travel: 313 mm Z3 travel: 430 mm A3 travel: 150 mm A4 travel: 1,500 mm No guarantee is made for the accuracy, completeness or timeliness of the information provided.

Condition: new, functionality: fully functional, Comparable with Durma, Baykal, Ermaksan, etc. Bending length 3020 mm Pressing force 320 t (also available in many other configurations!) Approach speed 140 mm/s Bending speed max. 10 mm/s Return speed 130 mm/s Y-axis stroke 400 mm Open height 650 mm Throat depth 450 mm Clear gap between frames 2555 mm Pgodpeuf Nr Ajfx Amisk Machine length 3785 mm Machine width 2290 mm Width without support arms 1740 mm Overall height 3100 mm Table height 920 mm Motor power 22 kW Oil tank capacity 300 l Machine weight 14,450 kg (Specifications may vary depending on equipment) Standard equipment: 3 CNC axes (Y1, Y2, X) Press beam double-guided, stable and precise Robust double-guided backgauge Backgauge fingers double-guided on linear rails Movable front arms with height adjustment Side and rear safety guards 60mm lower die adapter rail Manual upper tool clamping system (Promecam system) Foot switch with emergency stop 380 V, 50-60 Hz, 3 phase LED lighting Additional equipment: Delem DA 66t CNC control R-axis (backgauge) CNC controlled CNC-controlled crowning Fiessler Akas 2M laser safety device 2 additional backgauge fingers (total 4) 1 set of top and bottom tooling - Further processing lengths and capacities available upon request with appropriate accessories! -

Year of construction: 1988, condition: used, machine/vehicle number: 103.071.3156.78192, disk of circular saw-Ø: 400 u. 425 mm cutting area at 90° round: 130 mm cutting area at 90° square: 120 x 120 mm Pgjdpfx Aez N Amomisk cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 110 x 110 mm cutting speeds: 11 u. 22 m/min forward feed speeds: 670 mm/min cutting length: m. automat. Vorschub bis 1200 mm electrical connection: 380 V, ca. 4 kVA V sawing drive: 1,6/2,5 kW space needed: 1800 x 3800 x 2000 mm weight: ca. 1800 kg

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels Pedeuddcaepfx Amijgk of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.