Surface grinding machine

TSC txurtxil SR-0209

Condition: used, Year of construction: 2018, operating hours: 3,000 h, power: 130 kW (176.75 HP), front tire size: 600/65R28, rear tire size: 650/75R38, Equipment: front power take-off, Speed: 40, lifting roof, rotating beacon, / reversing gear, diesel, hydraulic system (2 / circuit), GPS system (receiver), / front PTO external control / _____ / continuously variable transmission / cab: Premium Comand / incl. RTK / / IMechanical U Ledsqrrmmspfx Agzsta

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Lodpfx Ageqx Sxlezota

Year of construction: 2013, condition: used, General information Field of application: Grounds care Technical information Power: 15 kW (21 HP) Type of fuel: Diesel Drive: Wheel Top speed: 40 km/h Weights Empty weight: 757 kg Carrying capacity: 590 kg GVW: 1.347 kg Condition General condition: average Technical condition: average Visual appearance: average Other information Towing capcity: 590 kg Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: John Deere Model: Gator 4x4 HPX Year of build: 2013 Condition: Used Data: Length: 280 cm Width: 160 cm Ltjdpfjv Ti Hhsx Agzja Height: 190 cm Seats: 2 Drive type: Diesel, 21 PS Own weight: 757 kg Loading area LxW: 112 x 124 cm Payload: 590 kg Towing capacity: 590 kg Top speed: 40 km/h Road permission: yes Total permissible weight: 1.347 kg Special features: Four-wheel drive, differential lock, Loading area with tilting function. Information: The Gators are sold without any accessories!

Condition: new, axle configuration: 2 axles, total length: 5,250 mm, total width: 2,300 mm, total height: 1,000 mm, color: red, Year of construction: 2025, Carrying capacity: 24.000 kg Tyre size on axle 1: 24R20.5 Ledpfov R I Nvex Agzeta Tyre size on axle 2: 24R20.5 Tyre size on axle rear: 24R20.5

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Lodpfx Agsqt Dmyozota Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Ledpfx Agsh Ha Ipjzsta Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm Ledpfeunt Eyex Agzota centre height 100 mm grinding wheel diameter 360 mm total power requirement kW weight of the machine ca. 3,8 t dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, many accessories.

Condition: good (used), Year of construction: 1986, 1 used universal cylindrical grinding machine type SA 5 /630 year of construction 1986 center height 140 mm Circulation over bed 280 mm Center width 630 mm Table speed 0.05 - 6 m / minute Coolant system Weight 4.5 tons Lodpfxoul Agbj Agzsta Technical data Errors excepted

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min Lsdpfx Aget Tqrnezsta total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E Ltjdjtr Azkjpfx Agzea On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment machine testing available The roundness within 0.001