Hydraulic power chuck

unbekannt Ø 215 mm

Condition: used, Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower for air conditioning -Type: l2HO2294D AMR075E1 -Voltage: 220-240 V Pjdpfjuu U Tlex Amiepr -Fan wheel: Ø 350/215 mm -Total dimensions: Ø 350 x 370 mm -Weight: 5.0 kg

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Psdorpn Dvopfx Amiopr

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Power chuck: chuck size Ø 215 mm -Jaw width: 20 mm -Passage: Ø 52 mm Podjv Tvtnepfx Amijpr -Mounting: Cone Ø 106-103 mm -Thread: M60 -Bolt circle: Ø 133 mm -Dimensions: Ø 215 x 90 mm -Weight: 19 kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 215 mm -Transport width: 750 mm -Shaft: Mounting Ø40 x 70/60 mm -Quantity: 1x transport roller available -Total dimensions: Ø 215 x 880 mm -Weight: 39 kg/piece Psdpfx Amjpumakoispr

Condition: used, Year of construction: 2003, turning diameter 190 mm turning length 620 mm control Fanuc Series 18i-TB total power requirement 15 kW weight of the machine ca. 13,5 t Pedpfx Ajxiy Ausmispr dimensions of the machine ca. 5350X3350x2395 m

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange Psdjd N Uy Repfx Amispr -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 215 mm -Hole circle: Ø 120/Ø 12 mm -Hole circle: Ø 135/M12 -Dimensions: Ø 215/H19 mm -Weight: 4.4 kg

Condition: good (used), Motor roller, roller motor, drum motor, belt sander, belt sander Psdpfxovy T Atj Amiopr -Drum motor: Drive drum -Type: unfortunately without a type designation -Speed: 1400 rpm -Drum: Ø 215 mm -Drum length: 295 mm -Shaft: Mountings Ø 32x95 mm / Ø 32 x 65 mm -Overall dimensions: Ø 215 x 455 mm -Weight: 57 kg

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis Ppsdpfx Aslz Rvlemijr 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Ppsdpfxst Hw N Te Amijr Control total power requirement 29 kW weight of the machine ca. 9,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 2002, cutting diameter / mm saw band length / mm cutting width / mm KASTO tec AC5 automatic band saw Sawing capacity: 23kW Machine weight: 5.9t Year of manufacture: 2002 Cutting ranges in mm approx.: Round: 530mm Square: 530x530mm Flat: 530x630mm Smallest dimension to be sawn: 10x10 mm Minimum length to be sawn: 6 mm Minimum residual length, single cut: 10 mm Minimum residual length, automatic mode: 35 mm Ppjdexrg E Ispfx Amier Automatic material feed, single, max. (standard): 600 mm Automatic material feed single max. (optional): 1500/3000 mm Multiple material feed: 9999 mm Machine roller conveyor length: 1568 mm Max. piece weight: 2275 kg Cutting speed: 12-120 m/min (infinitely variable) Cutting feed: continuously adjustable Material feed: with ball screw Automatic feed: with horizontal clamping device Material clamping: hydraulic, continuously adjustable Clamping force Machine clamping device: 200-1000 daN Feed clamping device: 200-2000 daN Saw blade clamping: hydraulic, factory-set Saw blade cleaning: by easily replaceable double brush, driven by a hydraulic motor. Coolant tank volume: approx. 185 l Pump capacity: approx. 25 litres/min On request, we can offer you the 4 immediately available saw blades at an additional cost.