Notching Machine

Unbekannt -

Condition: used, Year of construction: 1986, plate thickness 6,0 mm pressure 18 t cutting angle - upper blade 90 ° blade length 225 x 225 mm voltage 380 V Gkodog Ip Efjpfx Aftjf total power requirement 5,5 kW weight of the machine ca. 650 kg dimensions of the machine ca. 1,10 x 0,80 x 1,05 m - Angular stops adjustable

Condition: new, plate thickness 1,6 mm 4 t blade length 156 mm angle adjustable from - to fest Grad table surface area 450m x 305 mm total power requirement Handbetrieb kW Gksdpfx Afjftd Uaetof weight of the machine ca. 95 Kg Dimensions (LxWxH) 530 x 380 x 480 mm

Year of construction: 2013, condition: ready for operation (used), A Rehm Invertig Pro 350 AC DC and a Rehm Invertig Pro 450 DC are available, used and in good condition. 1) Invertig Pro 350 AC DC, standards: IEC 60 974-1 IEC 60 974-2, welding current range TIG: 3-350A, output voltage U₂ at maximum current: approx. 24V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent for TIG at 350A, mains voltage input: three phase 400V 50Hz, protection class: IP23S, protection category: S, setting range: 3-350A for TIG in this AC DC version, duty cycle 100 percent at 40°C 350A for TIG 100 percent duty cycle, input fuse protection: 32A at 3x400V for the 350 AC DC version, length: 520mm, width: 360mm, height: 460mm, weight: 29.5kg for AC DC version. 2) Invertig Pro 450 DC, standard: IEC 60 974-1, welding current range TIG: 3-450A, output voltage U₂ at maximum current: approx. 28V, open circuit voltage U₀: approx. 91V, duty cycle 100 percent at 450A TIG, lower for electrode welding approx. 60 percent, mains input: 3x400V 50Hz, protection class: IP23S, duty cycle at 100 percent 450A TIG at 40°C, electrode welding current approx. 360A at 100 percent duty cycle for electrode in the 450 DC version, input fuse protection: 32A at 400V three phase for 450 versions, length: 520mm, width: 360mm, height: 460mm, weight: approx. 28kg. An on-site inspection is possible. Gsdpfx Afjxddamjtekf

Condition: used, Year of construction: 1989, Year 1989 angle stop 30 -120 Grad good condition . Anschlag weight 600 kg +++++ Please note: Gkodpfx Ajliuihjftsf The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: good (used), Max. welding power 20 kVA Short circuit power 25 kVA Nominal power at 50 % ED 10 kVA Throat 500 mm Max. Secondary short circuit current 10 KA Connected load 15 kVA Dimensions W x D x H 400 x 1100 x 1150 mm Weight 200 kg Accessories / Special features: - Water cooling by external connection - Adjustable current time 0 - 10 - Adjustable electrode force by adjusting the spring - Mechanical foot switch Note / Reference value: With a max. secondary short-circuit current of 10 KA, a max. sheet thickness (normal sheet) of 2.5 mm can be welded. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 Gedpfjfi Tl Hjx Aftekf D - 44143 Dortmund - Wambel

Condition: like new (used), functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 400 mm, warranty duration: 3 months, year of last overhaul: 2024, Fully retrofitted manual floating CMM Mitutoyo Euro M544 (originally built ´97) retrofit 2024 with DEVA electronic and Inspect 3D Inca Premium software Measuring ranges: x-axis 500 mm y-axis 400 mm z-axis 400 mm Accuracy acc. ISO 10360 E = [3,5 + 4,0L/1000] µm at temperature range from 18 … 22 °C base material Granit Fixing holes M8 x 1,25 Scales Mitutoyo Linear Scales Scale resolution 0,0005 mm Electronic DEVA001 Probe Head Reniashaw MIH (used) Touch probe Renishaw TP20 (new) on demand: - Renishaw MH20i € 3.500,-- - Inspect3D Inca Premium latest version (plus € 4.000,--) - Aberlink 3D software (with free updates) € 1.500,-- Godpfok Arxtex Aftekf - installation, calibration softwaretraining Incl. 3 month warranty within EU (excl. travel costs)

Year of construction: 1985, condition: used, machine/vehicle number: 112-176, Technical data: -Bending mot. Automatic or manual mode -Bending performance square steel ST 37 up to approx. 25 mm -Bending performance flat iron ST 37 to approximately 30 x 8 mm -Bending length betw. the rotating units adjustable up to approx. 1000 mm Gjdpfx Ajc I Snzjftskf -Faceplate with various recording profile perforations -Tailstock / recovery storage -Delay start bending / bending length twisting preselection - right - left rotation -Space requirement approx. B 1750 x H 1100 X 500 mm -Drive 400 V / 0,75 kW -Weight approx. 150 kg

Condition: new, Year of construction: 2023, functionality: fully functional, faceplate diameter: 110 mm, working height: 72 mm, Rotary Table HV-4 for horizontal and vertical use Producer: VERTEX Type: HV-4 Year of Construction: 2023 Serial Number: - Direction of Use: horizontal, vertical Mounting Plate: Ø 110mm Centre Sleeve: MK2 through hole Flatness of Clamping Surface: ±0,015mm/100mm Parallelism of Clamping Surface to Ground: ±0,02mm/100mm True Running of Clamping Surface: ±0,015mm/100mm Workpiece Weight horizontally: max. 35 kg Workpiece Weight vertically: max. 18 kg Weight: 7 kg Scale Ring: 360° Quick clamping device: yes Gear: Worm gear ground, hardened & adjustable, 90:1 Godpfxopr Ur So Aftokf Ort: Austria / Vienna Condition: new, originally packed Description: Simply viewed, a dividing head is a turntable on which a workpiece can be attached directly or using clamping aids. The plate can be rotated to any desired angle, either with a crank and scale ring or with high precision using a pin and a perforated disk (optional accessory). Application: Support Tool for the production of gears, belt wheels, perforated disks, ... Dimensions see drawing

Year of construction: 1981, condition: used, plate thickness 4 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 800 mm total power requirement kW weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch Godpfx Aep U Utfeftekf - 2 pcs. sheet metal stop

Condition: used, plate thickness 3 mm blade length 250 mm angle adjustable from - to fest 90 Grad table surface area 900 x 790 mm total power requirement kW weight of the machine ca. 0,65 t dimensions 1,2 x 0,9 x 1,1 m Gkedpfx Ajvki D Usftef Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop