Clamping plate with T slot

unbekannt 630/630/H75 mm

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -T-slot plate: clamping plate with T-slots, for hydraulic press, eccentric press... -Clamping surface: 630 x 500 mm -Inner diameter: 180 mm -Plate height: 75 mm -Groove width: 19 mm Lodpfx Ajxm R Ipsk Dsaa -Dimensions: see drawing in the photos -Dimensions total: 630/500/H75 mm -Weight: 162 kg

Condition: new, Year of construction: 2024, Number of tools 36 St. Laodocdq H Hjpfx Ak Doa dimensions 0,72 x 0,56x 0,95 m weight 27 kg New movable tool trolley for toolholders with 40' taper or optional for VDI 40 toolholders. Each row is easily removable. The trolley will be packed for transport and be delivered without any toolholders. Variations in color are possible.

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. Lsdpfju Nfwlox Ak Deaa *

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm clamping spigot bore Ø 20 mm Ledsh Uhqyspfx Ak Dsaa ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Year of construction: 2005, condition: excellent (used), driven tool with collet chuck make Benz1114 DA 003 00 E64,1 kg Lajdpfed Th Euex Ak Dea

Condition: ready for operation (used), Year of construction: 2001, pressure 100 t chamfer lenght 4100 mm distance between columns 3700 mm column arm 415 mm stroke max. 215 mm dayligth 410 mm ajustment speed 200 mm/sec working feed 10.0 mm/sec return speed 150 mm/sec work height max. 1080 mm table width 100 mm Control CYBELEC oil volume 160 ltr. voltage 400 V power capacity 8.5 kW weight 10200 kg range L-W-H 4800 x 1800 x 2600 mm Ljdpfx Aexzuwkok Doaa - in checked conditions - machinevideo - ?v=Phcik_oo4CE Equipment: - BEYELER electro-hydraulic CNC press brake - CNC CYBELEC control unit “DNC 1200 PS/B” * High-resolution screen * Clear, concise menus in the operator's language * Tool and product library * Swiveling control panel, front right - CNC-controlled axes (Y1+Y2-X) - CNC-controlled backgauge adjustment (X-axis) * 2x manually adjustable stop fingers - Manual upper tool clamping - Manual lower tool clamping - Rear safety device (safety door) - Side safety device (safety doors) - Bending tools * 1x set of split upper tools (ROLLERI TOP 175.26.R08) * 1x set of split 1V dies (V 12 mm) - 2x freely movable 2-hand controls - 2x freely movable foot switches - Operating instructions for control system

Condition: new, Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 5,025 mm Number of bays per row of shelves: 02 pcs. 2,400 mm each Number of levels plus floor level: 04 pcs. The scope of delivery includes: 03x pallet rack uprights, new Material color: sendzimir galvanized Material color base plates: RAL 5010 gentian blue Upright type: P73 Upright profile: 75 x 75 x 2.00 mm Incl. cross and diagonal struts, foot plates The uprights are unassembled (bolted framework) 2,350 mm high 800 mm deep Note: The shelf stands are supplied unassembled. We are happy to pre-assemble the shelf uprights for a a surcharge of € 17.50 plus 19% VAT. 16x pallet rack traverse, new Material color: RAL 7035 light grey Lodpfx Akjkti Sxj Djaa Box profile: 80 x 40 mm Traversentyp: ASM50-CES80|40|1.5 Version: Stepped beam Bracket: 5 HK (hooks) Clear width: 2,400 mm Max. load per pair of spreader beams 1,600 kg, with evenly distributed load 08x chipboard II. Choice, used Thickness: 22 mm Dimensions: 2,380 x 710 mm Surface: possibly coated ( possibly two-piece ) 32x locking pins, new Design: completely galvanized To secure the side rails against unintentional lifting out 12x bolt anchors, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 06x shims, new Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plates with details of bay and shelf loads, manufacturer and commission number Dimensions: 297 x 210 x 2 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Laodpfx Akou Nfvbo Doa Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *

Condition: used, Technical details: Pressure: 2,5 t throat: 155 mm max. ram stroke: 280 mm Lsdpfxju Nfv Ue Ak Deaa distance table/ram: 450 mm clamping plate on table: 260 x 1000 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 930 mm total power requirement: 1,1 kW weight of the machine ca.: 500 kg dimension machine xH: 0,85 x 1,0 x 17 m The machine is equipped for straightening work. *

Condition: good (used), Year of construction: 2008, MAchine is fully functional. Ledpswb D Hqefx Ak Djaa