Three-jaw chuck

unbekannt Durchmesser 250 mm

Condition: used, Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm Gjdpfx Amjf A E Hbeyobl -Dimensions: 300/300/H mm -Weight: 40 kg

Year of construction: 1984, condition: used, gr. grinding Ø: 40 mm small grinding Ø: 5 mm weight: 0,9 t 2 grinding wheels with flange 8 collets 1 coolant tank Gedpfx Amocq Rv Ueysbl mechanical feed with fixed stop The cardan shaft for the workpiece drive is worn out

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Rezess: Ø 194 mm -Hole circle: 3 x 214 mm -Throughout: Ø 70 mm -Weight: 17 kg Gbsdpfx Ajduab Njmysl

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -hard: interchangeable jaws -Bayonet short cone flange: cone size 6, cone Ø 106 mm, bolt circle Ø 133.4 mm Gjdjduacnspfx Amysbl -Throughout: Ø 70 mm -Weight: 28 kg

Condition: new, Year of construction: 2023, Welding turntable, tank turning device 6000 Kg load capacity Didital display with foot remote control diameter from 180mm to 3500 mm drive rollers diameter 300mm Gbsdpfxok Adl Ho Amyjl dimensions: length 1900mm x width 470mm x height 390mm Speed infinitely variable 200 - 1800 mm / min.

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Short taper mount: Ø 105 mm Godpfjdrwl Iex Amyjbl -Passage: Ø 76 mm -Weight: 26 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Transmission: n/a -Weight: 25 kg Gbedpfxsdz U Sus Amyel

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm drum diameter 300 x 120 mm feed 100 - 1000 mm/min Gbsdpfxof Ep Dio Amyel total power requirement 2 x 0,55 kW

Condition: used, Flange mounting, driving flange -Chuck flange with: driving pin -Outer diameter: 250 mm Gbeded Hcq Rspfx Amyol -Short taper mount for: bayonet disc mounting DIN 55027 -Cone size: 8 -Hole circle: Ø 171.4 mm -Weight: 17 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm Gbedpjd Ira Nefx Amyel -Passage: Ø 82 mm -Short taper: 8 -Weight: 24.2 kg

Condition: used, Year of construction: 1983, Bohrleistung in Stahl (-Ø 50 mm throat 1500 mm workpiece height max. 1380 mm Bohrleistung in Guß (-Ø 60 mm Abstand Spindelmitte bis Säule 320 - 1250 mm swival range +/- 180 ° base plate surface area 2640 x 1000 mm max. torque on the spindle 310 Nm Bohrspindel-Ø/ Aufnahme 75 mm /MK 5 bore spindle stroke 310 mm spindle turning speed range 28 - 2500 U/min Gbsdpfotv Iklsx Amysl feed: 0,05 - 2 mm/U power capacity 4 kW weight of the machine ca. 4,3 t dimensions of the machine ca. 3,2 x 1 x 2,75 m cube table 500 x 500 x 500 mm

Condition: used, Three-jaw chuck, three-jaw lathe chuck - Chuck size: Ø 250 mm Gsdpfx Ajd Ira Ujmyebl - Passage: Ø 80 mm -Short taper: 6 -Remark: without further jaws -Weight: 26.1 kg

Condition: good (used), Wedge bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Mouth size: Ø 250 mm -Cone: Ø 94 mm -Thread: M20 Gbsdpfx Aed Itcnomyel -Gradient: 2.5 mm -Weight: 33.3 kg

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Gsdpfx Ametzctmsysbl Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Gedpfodt T I Djx Amyebl -Chuck size: Ø 250 mm -Adapter plate with thread mount: Ø 67 mm -Passage: Ø 51 mm -Weight: 27 kg