Welding turn Table

Protec RB 6000

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation Pjdpfx Aqjl Dwnlsvopw to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Ppodpfxod Anz Rs Aqvsw Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust

Condition: new, Year of construction: 2024, load capacity: 6,000 kg, Equipment: foot remote control, Welding rotary table, container rotating device, 6000 kg load capacity with hand and foot remote control Diameter from 160 mm to 4000 mm Ppjdsgfql Aopfx Aqvew Drive roller diameter 300 mm Dimensions: Length: 1900 mm x Width 470 mm x Height 390 mm Speed, continuously variable, 50 - 2000 mm/min. Motor AC 380 V

Condition: excellent (used), Motorized 3x3 welding column with movement control by pushbutton panel. Useful capacity: 3x3m Wire spool dispenser Lincoln Idealarc DC-1000 submerged arc equipment with torch and flux holder + Lincoln NA-3N Amps and Volts regulation panel. Submerged arc duty factor: 1000 Amps at 100%. Idealarc® DC-1000 Submerged Arc Welder Ppedpju Afttsfx Aqvsw Input voltage: 230/460 Input current: 193/96.5A Input Hertz: 60 Input phase: 3 Input power: 230/460/3/60 Mode icon: DC/DC Output range: 150-1300A DC,16-46V Polarity: DC Nominal output: 1000A/44V/100%

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. Ppedpfx Aqjqt Dmysvow When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Year of construction: 2004, condition: excellent (used), Four-side planer Ppodpohlp D Njfx Aqvow -max. planing width 23cm -max planing height 16cm -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: new, Year of construction: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roller Shaft diameter: 40 mm Roller diameter: 152-162 mm Revolutions: 8.5 per min. Top roll adjustment: 120 mm Capacity table: in the attachment Machine available in various versions: Manual adjustment, 3-roll driven etc. Ppodpfxjhgiuho Aqvsw

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg Ppodpfxohcnhmj Aqvew - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Condition: good (used), travel distance X-axis: 745 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 300 mm, Bridgeport milling machine Type: Interact 4 Control: Heidenhain TNC 155 X-path: 745 mm Y-path: 370 mm Z-path: 300 mm Bed: 960 x 380 mm Spindle: ISO 40 Dimensions: 185x180x235 cm LxWxH Pedpfxoqgcdtj Aqvepw

Condition: used, (14) Unused Man UPB 12-L-W-E3262E302 CHP cogeneration units with capacity 130kWel and 226 kWTh made in 2022 and designed to be fed by wood gas. Project was dropped so the equipment was never installed or commissioned. Psdpfx Aqsyhc T Ijvjpw Plant includes the following major equipment: - Man 12 cylinder engine rated 273 kW, 50Hz, 1500 RPM - Marelli MBX-E 250 MA4 generator rated 169 kVA, 400V, 50Hz, 1500 RPM - AFR Air-Fuel Ratio control system by Motortech - Generator control system by ComAp (14) units available.