High Pressure Pump
URACA
KD716
High Pressure Pump
URACA
KD716
Type of offer
Used
Location
Nijverheidsweg 1G, 3251LP Stellendam, NL
High Pressure Pump
URACA KD716
MACHINE DATA
- Machine type:
- High Pressure Pump
- Manufacturer:
- URACA
- Model:
- KD716
- Condition:
- good condition (used)
PRICE & LOCATION
LISTING DETAILS
- Listing ID:
- A3976432
- Update:
- 20.09.2021
DESCRIPTION
High Pressure Pump
260 bar 60 ltr/min at 1500 rpm and 30kW (current configuration)
600 bar 60 ltr/min at 1500 rpm and 66kW
600 bar 90 ltr/min at 2200 rpm and 97kW
Ju89hq
260 bar 60 ltr/min at 1500 rpm and 30kW (current configuration)
600 bar 60 ltr/min at 1500 rpm and 66kW
600 bar 90 ltr/min at 2200 rpm and 97kW
Ju89hq
SELLER
HYDREQ BV
Contact person: Herr J Ouwendijk
Nijverheidsweg 1G
3251 LP Stellendam, Netherlands
Registered since: 2016
HYDREQ BV
Hydroblasting Equipment
We buy and sell new and used hydroblasting equipment
Hydroblasting Equipment
We buy and sell new and used hydroblasting equipment
Send inquiry
TELEPHONE & FAX
Telephone:
+31 187 223 000
Fax:
These listings may also fit your interest.
14
Rheda-Wiedenbrück
2019
reconditioned (used)
High-pressure pump/high-pressure plunger pump/channel rinsing pump Uraca KD716-G (with integrated gear i=3.32)
DATA
Plunger: d 65 mm
Operating pressure: 140 bar
Flow rate: depending on the drive power/drive speed see data sheet FOR EXAMPLE
370 l/min. at 1800 min-1
309 l/min at 1500 min-1
247 l/min. at 1200 min-1
206 l/min at 1000 min-1
Translation: i=3.32
Gear shaft: 46 mm
Drive: left or right
with engine cooler
DESCRIPTION
Condition: 2019 overhauled and in very good condition.
The following par...
8
URACA KD716 High Pressure Pump
Ptwqeu
Electric Driven High Pressure Pump
28mm
Two speed motor;
450 bar at 84 ltr/min at 1500 rpm
450 bar at 42 ltr/min at 750 rpm
11
Rheda-Wiedenbrück
2000
refurbished (used)
High pressure pump/high pressure plunger pump/channel flushing pump Uraca KD716-G (with integrated gear i=3,32)
DATA
Plunger: d65 mm
Working pressure: 140 bar
Flow rate:
370 l/min. at 1800 min-1,
309 l/min. at 1500 min-1,
247 l/min. at 1200 min-1,
206 l/min. at 1000 min-1.
Gear ratio: i=3,32
Nablml
Gear shaft: 46 mm
drive: right or left
with engine cooler
DESCRIPTION
Condition: Overhauled in September 2021.
The following parts were newly installed:
- Pump head complete including plunger, plunger...
Hot water generator
Working pressure: max 500bar
Motor: 12V DC or 230 V/50 Hz
Fuel consumption: approx. 7,5 l/h fuel oil
Bkwlee8i
Fuel tank volume:18l
Pressure outlet (water) M 24*1,5 AG
Heating power oil burner: 67 kW
Empty weight:129kg
Mass: (L*W*H) 80*75*90 cm
Item number: 1 521 009 or 1 521 022
6
Sandersdorf-Brehna, Germany
(dealership location)
2009
used
Hammelmann Aquajet 12, 2500 bar , 24 liters.
P83tl
4
High-pressure pumps are used for cleaning machines and apparatuses.
Vessels, filter cloths of filter presses and pipelines can be cleaned with them.
Name: High Pressure Pump
Manufacturer: Uraca
Type: KD613
Year built: 1991
Material: mild steel
Driving force: 54 kW
Dimensions: L 1800 x W 1000 x H 750 mm
Empty weight: approx. 2000 kg
Speed: 468 rpm
Flow rate: 270 liter/min
Condition: Used
Technical documentation: yes
Hw3790cle
Price: on request
13
Pirdop
1999
good condition (used)
We are selling a stationary Uraca RS724E/675 ultrahigh-pressure pump with the following technical parameters:
- pressure: 675 bar
- debit: 127 l/min
- power: 155 kW electric motor
- 5582 work hours
Hbmhfszmg
We bought this pump from the Netherlands in 01/2021. It was sold with a 3-month guarantee. It was not used by us due to the fact we were unable to power it with such high kW.
As additional equipment, we bought and installed a 25 meters long electric cable for powering the pump.
3
Starnberg
2013
excellent (used)
Ex location Germany, free load on truck.
Main Features:
- Stainless steel design with single stuffing boxes
- Clear water model
- Valve-lift for drainage
- Horizontal design
Max Pressure 3.000 bar
Bz8xv7j7hg
Drive power 103 kW
Motor Speed 1.500 rpm
Pump Speed 402 rpm
Gear Ratio 3,73
Capacity 20 l/min
Plunger dia 17 mm
Stroke 85 mm
L x W x H, ca. 3 x 2 x 2 m
Weight, ca. 3 tons
12
Rheda-Wiedenbrück
2000
excellent (used)
Stationary high pressure pump unit URACA RS705E/180 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat
- Pump type: KD705
Operating pressure: 180 bar
Delivery rate: 51 l/min.
driving power: 18,5 kW
required inlet pressure: approx. 2 bar
Plunger: d28 mm
plunger stroke: 42 mm
pump speed: 690 min-1
suction connection: G2
Pressure connection: M24x1,5DKO
- Safety pressure gauge 0-250 bar
- C-coupling, suction side
- dirt trap G 1 1/2 suction side
- compl...
Cold water high pressure cleaner
Bknna3fk
Working pressure: stepless up to 500 bar
Delivery rate:up to 15l/min (900l/h)
Pump: 3 plunger, full ceramic
Engine: 2-cylinder Hatz-Diesel ,air-cooled
Engine power: 17kW
Engine/pump speed: 2.900/1.450 rpm
Pump drive: V-belt
fuel consumption: ca 4,0l/h
Fuel tank volume: 20l
Pressure outlet (water): M24*1,5 AG
Empty weight: 215kg
Dimensions:(L*W*H) 91*80*96 cm
Item number: 1 513 020
9
Sandersdorf-Brehna, Germany
(dealership location)
excellent (used)
Very good and robust URACA pump with Deutz engine. Pump has just 250 hours and engine 500 hours. Pump makes 800 bar and delivers 69 liters/m.
Fdkbgko9
6
Uraca KD 624-VG
Botnvq23
55mm plungers
200 bar
328 ltr/min bij 1800 rpm
perfecte toestand
10
Stationary high-pressure pump unit URACA RS716E/400 on base frame for all cleaning and pressure testing tasks. Similar but no Hammelmann, Woma, Kamat
Operating pressure: 400 bar
Delivery rate: 56 l/min.
9hwrj0k
Drive speed: 1.475 RPM
Drive power: 44 kW
with SIEMENS 45 kW 3~motor 1LA6 223-4AA60 225M IP 55
with URACA MSÜV 16/700 and PSV8/800 valves
Dimensions LxWxH: approx. 1300x1100x1400 mm
weight: approx. 1.115kg
Year of construction: 1995
Condition: in good used condition.
Cold water high pressure cleaner
E9bzcav
Working pressure:stepless up to 500 bar
Delivery rate:up to 15l/min (900l/h)
Pump:3 plunger, full ceramic
Engine:2-cyilinder,4-stroke gasoline engine
Engine power:16,4 kW
Engine/pump speed:3.250 /1.450 rpm
Pump drive:gearbox
Fuel consumption:ca 5,5l/h
Fuel tank capacity:20l
Pressure outlet(water): M24 *1,5 AG
Empty weight: 128kg
Mass (L*W*H) 75*79*99
Item number: 1 486 050
4
Uraca pump with 500 bar and 12,3 liter/min .
Bb0p3vr
Electric drive ,overhauled and in very good condition.
4
Stellendam
good condition (used)
Water Heater for High Pressure Water
heats water at 600 bar and max flow of 130 ltr/min up to 90 degrees celcius
Yrv7sw
13
Rheda-Wiedenbrück
2004
reconditioned (used)
Stationary high pressure pump unit / high pressure cleaning unit URACA RS716E/200 on base frame for all cleaning tasks. Similar/no Hammelmann, Woma, Kamat
Pump type: KD716-K Version A2
Operating pressure: 200 bar
Delivery rate: 73 l/min.
Pump speed: 298 RPM
Drive power: 29 kW
with ADDA 30 kW 3~motor, 1500 rpm, 400V, 50Hz, IP55, B3, IEC
with URACA HHV5-64 safety valve
Dimensions LxWxH: approx. 2170x1100x790 mm
Weight: approx. 800 kg
Jib3h2j
Year of construction: 2004
Condition: in very good used ...
Cold water high pressure cleaner
Working pressure:stepless up to 500bar
Delivery: up to 30lmin (1800l/h)
Hekh8uyd
Pump:3 plunger ,full ceramic
Motor:Electric motor 400V,50HZ,IP54/63 A CEE
Motor power:30 kW
Motor/pump speed:1.450/970 rpm
Pump drive:V-belt
Pressure outlet (water):M24 *1,5 AG
Empty weight:450kg
Mass (L*W*H) 116*80*130 cm
Item number: 1 518 020
6
Uraca PÜV 8/200 safety valve, bypass valve, overflow valve (pneumatic and silicone-free) similar but not Hammelmann, Woma, Kamat
Perm. operating overpressure: 50-200 bar
Imltfdd7g
Recommended delivery rate: 10-125 l/min.
Dimensions HxWxD: 260x113x113 mm
Weight: 10,9 kg
with MADER PEU-063-0010-I-P-M
Year of construction: 2012 (unused)
Demineralized water: Suitable for operation with demineralized water.
Electro-pneumatic control: Accepts the switching command and the pressure setting of the valve...
Hot and cold water high pressure cleaner
Working pressure:stepless up to 350 bar
max flow rate:16l/min
Pump:3 plunger,full ceramic
Engine:Kubota 3-cylinder diesel
Engine power:13kW
B93muytu2i
Engine & pump speed:3000/1,090 rpm
Pump drive:V-belt
Fuel consumption:3,9l/h
Fuel tank volume:70l
Water tank volume:300l
Pressure outlet(water) M22 *1,5IG
Heating power oil burner: max1*115kW (ca 95°C)
Olburner consumption: ca 7l/h
Structure:self-supporting frame on rack with forklift pockets
Empty weight:c...
Hot and cold water high pressure cleaner
Working pressure:stepless up to 350 bar
B93msczcg9
max flow rate:16l/min
Pump:3 plunger,full ceramic
Engine:Kubota 3-cylinder diesel
Engine power:13kW
Engine & pump speed:3000/1,090 rpm
Pump drive:V-belt
Fuel consumption:3,9l/h
Fuel tank volume:70l
Water tank volume:300l
Pressure outlet(water) M22 *1,5IG
Heating power oil burner: max1*115kW (ca 95°C)
Olburner consumption: ca 7l/h
Structure:self-supporting frame on rack with forklift pockets
Empty weight:c...
Hot and cold water high pressure cleaner
working pressure: stepless up to 220 bar
max flow rate 26l/min
Hd8uazk3
Pump:3 plunger,full ceramic
Engine: Kubota 3-cyilinder diesel
Engine power: 13kW
Engine and pump speed: 3.000/1.760 rpm
Pump drive: V-belt
Fuel consumption: 3,9l/h
Fuel tank volume: 70l
Pressure outlet: (water): M22 *1,5 AG
Heating power oil burner : max 1*115kW (ca 95° C)
Consumption oil burner: approx 7l/h
Construction: Skid - construction
Empty weight: ca 420kg
Mass(L*W*H) 120*80*1...
6
Wasserlauf
- Wassermangel-Sicherung zum Schutz der Pumpe bei schwachem Wasserzulauf
- Auswaschbarer Wasserfiltereinsatz aus Edelstahl für maximale Lebensdauer der Pumpe
Jffh3o9
- Wartungsarme Hochleistungs-Kurbelwellen-Industriepumpe für hohe Leistung bei maximaler Lebensdauer
- Unabhängigkeit vom Wasservordruck durch Vordruckpumpe mit Edelstahl-Vorlagetank als Puffer und für zusätzliche Wasserberuhigung
- Thermoschutzventil zum zusätzlichen Schutz der Pumpe
- Frost- und Pumpschädenprophylaxe du...
4
DYNAJET 800me - 400V/50Hz/63A cold water high pressure cleaner.
Sv390k
No Falch, Woma, Hammelmann, Oertzen, Den-Jet or Kamat.
GET TO KNOW OFFER:
If you want to be sure this unit is right for you, we have a special offer for you:
Crediting 100% of the rentals for up to 6 months on the purchase price!!!
The DYNAJET 800me is the first device worldwide with 800 bar working pressure and
dry-closing gun without control cable. In addition to its high performance, the
professional high-pressure cleaner ...
4
Cold water high pressure cleaner
Welcome to the innovative and compact me-class! The DYNAJET 280me with up to 280
bar working pressure impresses not only with its high performance, but also with its compact
Iuo3g7izg
dimensions and high mobility. This makes the versatile high-pressure cleaner one of the all-rounders in our range.
all-rounder in our range.
Construction
Robust, powder-coated steel frame for optimum machine protection and long service life
1-axle chassis with pneumatic tires for ea...
4
Cold water high pressure cleaner, export version with 60Hz
Welcome to the innovative and compact me-class! The DYNAJET 150me with up to 150 bar working pressure impresses not only with its high performance but also with its compact dimensions and high mobility. This makes the versatile high-pressure cleaner one of the all-rounders in our range.
Construction
Robust, powder-coated steel frame for optimum machine protection and long service life
1-axle chassis with pneumatic tires for easy maneuver...
5
DYNAJET 500me/30 basic - 400V/50Hz high pressure cleaner.
No Falch, Woma, Hammelmann, Oertzen, Den-Jet or Kamat.
GET TO KNOW OFFER:
If you want to be sure that this unit is the right one for you, we have a special offer for you:
Crediting 100% of the rentals for up to 6 months on the purchase price!!!
Welcome to the compact me-class with extra high flow rate! In contrast to its smaller colleague DYNAJET 500me, the more powerful DYNAJET 500me 30 basic with up to 500 bar working pressure achieves ...
8
Heißwasser:
• Patentierte Brennersteuerung ohne Magnetventile für sicheren und effizienteren Betrieb ohne Nachlaufen
• Vorheizen des Wassers durch Motorkühlung für hohe Energieeffizienz
Wasserlauf:
• 25 m Zulaufschlauch und 50 m Hochdruckschlauch auf unverwüstlichen, fest installierten Trommeln
für sekundenschnellen Arbeitsbeginn
• Auswaschbarer Wasserfiltereinsatz aus Edelstahl für maximale Lebensdauer der Pumpe
• Großer integrierter Wassertank für unabhängiges Arbeiten auch ohne Wasseran...
6
Gewindeanschluss
Eingangs-Anschluss GEKA
Ausgangs-Anschluss M22x1,5 IG
Antrieb
Antriebsart Dieselmotor
Motorleistung 13 kW
Drehzahl Motor Max. 3000 UpM
Motortyp Kubota 3-Zylinder Diesel (wassergekühlt)
Kraftübertragung von Motor zur
Pumpe
Riemen
Kraftstoffverbrauch 3,9 l/h (Durchschnitt)
Volumen Kraftstofftank Ca. 70 l
Sonstiges
Fahrwerk 1-Achs-Anhänger mit PKW-Auflaufbremse
Gewicht in KG 760,0
Maße (L/B/H) 291 x 172 x 177 cm
Maße offen (L/B/H) 320 x 172 x 220 cm
Medium Klares Trin...
2
The new DYNAJET Surface Cleaning System DFS 500 VAC: With 500 bar and integrated
Venturi principle, the DFS 500 VAC is the ideal tool for fast and efficient cleaning of large surfaces
and efficient cleaning of large areas such as industrial and hall floors, building forecourts or
Zwn9c
forecourts or courtyard entrances.
The suction according to the Venturi principle, where an additional water jet creates a
vacuum is generated by an additional water jet, which carries the dirty water away, elimin...
3
• Vordruckpumpe für optimale Versorgung der HD-Pumpe zur Minimierung von Verschleiß und Kosten
• Langsam laufende und einfach zu wartende 3-Plunger-Kurbelwellenpumpe für maximale Lebensdauer und geringe
Verschleißkosten
BASISDATEN
System Heiß- und Kaltwasser-Hochdruckreiniger
Typ TraileDruckklasse 500 bar
Druck regelbar Ja
Druck minimal 150 bar
HYDRAULIK
Minimale Fördermenge 14 l/min
Maximale Fördermenge 30 l/min
Drehzahl Pumpe Max. 1450 UpM
Hydraulische Leistung 28 kW
Pumpe 3-Plunger, V...
2
Dynajet roof cleaner for fast and thorough cleaning of roofs.
Net price: € 2.933,00.
Ideally suited for cleaning concrete tile and tiled roofs. Completely equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel distance and height adjustable to roof profile, nozzle bar for 2 identical nozzles (shape D). Connection: M22 x 1.5 ET or M24 x 1.5 ET.
500 mm diameter.
Please order the nozzles, sealing rings and support rings separately (not included in delivery).
Attenti...
5
Sandersdorf-Brehna
2007
good (used)
Ecomaster MK3 P16 2800 bar (20 l/min),maintained and ready to use, including 2 hoses,1 gun, 1 multi-jet nozzle, control cable.
Pyvfz
4
Rybnik
2010
ready for operation (used)
Used WOMA Ecomaster MK3 250M (triplex pump with piston Ø16mm)
Pynwx
Operating pressure: 2800 bar
Max flow: 20 lpm
Operating hours pump: 1007 h
Operating hours engine: 1517 h
Year of manufacture: 2010
Condition: very good
Additional equipment: 40m HP hose, control cable + cassette, HP gun
14
Lichtenstein
1975
excellent (used)
1 complete compressed air system used good
Manufacturer: Boge, Bielefeld/VIG, Bochum; Year of construction1975/1997
Location: 72805 Lichtenstein (Württemberg)
Bqfm2bq0c
consisting of:
1 Boge 3 piston compressor, type S B Rm 1375 35/1500
No. 213058, speed 950 rpm, year of construction 1975
Highest operating pressure 15 bar, flow rate: 1375 ltr/min,
with Ferax reed valves + 4mtr connection cable with plug.
1 complete control in the hangable switch box Completely wired with all c...
7
Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma.
Pump type: HDP 112
Working pressure: 300 bar
Delivery rate: 153 l/min.
Drive speed: 1500 rpm.
Drive power: 90 kW
with VEM motor 90 kW 3~motor, IP55,
with pressure regulating valve,
with safety valve,
with oil cooling system.
dimensions LxWxH: ca. 2300x1000x1400 mm
weight: approx. 1500 kg
Year of manufacture: 1996
Condition: in good used condition.
B7zpuqboxh
15
For sale Falch High Pressure Unit Trail jet 100 (T10)
B7janm8ygf
Data:
Engine Deutz 4 cyl Diesel water cooled Type BF4M1012 EC
1900 rpm 87 hp 68 Kw with turbocharger fitted with new filters and oil.
High pressure pump
Uraca pump 1100 max press 1000 bar adjusted
32 liters per min maximum (Pump works fine, no pressure loss)
Nozzle 045
Maximum allowable water temp is 40 degrees.
Year of construction of this machine is 2001
Hours of operation of this machine is 2100 hours
Comes with 10 mtr high pres...
12
Rheda-Wiedenbrück
2018
excellent (used)
Stationary high pressure pump unit Hammelmann HDP 142 on base frame. Similar but no Kamat, Uraca, Woma.
Pump type: HDP 142
Working pressure: 610 bar
Qj3zv
Delivery rate: 78 l/min.
Drive speed: 1500 rpm.
Driving power: 86 kW
with AC M 280 M-4/HE electric motor 90 kW, IP55,
with pressure regulating valve,
with safety valve,
with oil cooling system.
dimensions LxWxH: approx. 1.700x850x1.450 mm
Weight: approx. 1.200 kg
Year of manufacture: 2018
Condition: after service by Hammelmann in October 2020 ...
14
Te Koop
Nieuwe Hogedruk unit, eigenbouw Vibemo
Info over deze 400/21 VIHT
Motor type Lombardini LDW 1404 3000 omw diesel.
skit met dieseltank 55 liter
pomp 500/21 (wordt afgeregeld op max 400 bar)
aandrijfving tandwielkast
Heater diesel 220v 50 hz dmv omvormer gevoed goed voor 100 graden aan de nozzel
druk regelbaar door keuze knop toerental
temp regelbaar door instelbare thermostaat
eigen besturings systeem met bewaking voor temp en olie.
door keuze knop is het toerental, uren, voltage v/d ...
3
Rheda-Wiedenbrück
2022
as good as new (ex-display)
The CDT50 in the trailer version covers a pressure of 230 to 2000 bar with a volume flow of 11 to 80 l/min. The pump is driven by a water-cooled 4-cylinder Toyota diesel engine. Durability and corrosion resistance are ensured, among other things, by the frame inside the trailer, which is made of hot-dip galvanized steel. In addition, the frame is primed and then painted, which creates a very attractive appearance. The frame can be pulled out very easily for maintenance. The CD50 in trailer versi...
1
Rheda-Wiedenbrück
2022
as good as new (ex-display)
The CD160 series of our high pressure machines covers a pressure of 200 to 2500bar and a volume flow of 25 to 300 l/min. The pump is driven by a water-cooled 4-cylinder SISU diesel engine with turbocharging and charge air cooling. The entire frame is made of hot-dip galvanized steel for durability and corrosion resistance. The frame is primed and then painted for a beautiful appearance. The dimensions of the machine are 2250 x 950 mm. The frame is equipped with rubber feet, forklift pockets and,...
