Batch mixer 4000 L

Van Aarsen PMM 4000L

Condition: like new (used), Year of construction: 2014, functionality: fully functional, crusher SG - 500/200 - the crusher is completely overhauled and ready for operation - the crusher is also equipped with a vibrating conveyor 8 m long with a separation where sawdust is separated and equipped with a magnet with metal detection in the attachment you will find technical parameters for the machine ¨ Bwjdpfx Afowhw Iusxst - electrical switchboard for the machine.

Condition: like new (used), Manufacturer: Flender Bedpfx Ajg Stz Asfxowt Type: K2S-2,5 Backstop: Yes Power: 78 kW Ratio: 44,16:1 RPM in/out: 1.400 / 31,7 Shaft ø in: 65 mm Shaft ø out: 140 mm

Condition: excellent (used), Year of construction: 2014, operating hours: 10,000 h, pressure: 10 bar, operating pressure: 10 bar, For sale: Certuss steam generator with gas burner. The unit is in very good condition. Only 10,000 operating hours. Model Junior 120, year of manufacture 2014. Steam output 120 kg/h. Maximum steam pressure 10 bar. Delivery available for an additional charge. Inspection on site possible. Please contact us with any questions. Bwodsyhrp Espfx Afxjt

Condition: used, Year of construction: 1986, functionality: fully functional, Dry-ball mill – including new electric motor Bedpfx Ajxixiyofxewt

Condition: used, Year of construction: 2009, functionality: fully functional, Kalmijer KGM biscuit machine with 2 biscuit rollers: Spekulatius and Kipfel. Comes with 10 baking trays. The machine has been overhauled. Stainless steel frame on castors. Equipped with heating for the rollers. Tray width: 25 cm; tray lengths: 1 m, 80 cm, and 60 cm. 16A connection. If you have any further questions, please contact us. Thank you in advance! Bwsdpfxew T Rxcj Afxjt

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Bwodpfsu Agh Sex Afxet Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, Bwodpjua D U Isfx Afxot (Mozgatható Szállítószalagos) Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. Bwsdpoq Nf Uwjfx Afxjt 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Year of construction: 2023, condition: new, Complete solution for transporting bulk goods such as wood chips, wood pellets, shredded goods, granulate, etc. Aluminum angled conveyor incl. substructure horizontal area 1.500mm(customizable) Rising range 3.000mm (customizable) Infinitely adjustable angle in the kink Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable ( to move) Bwsdpfxjk S Dw Ee Afxst Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. We always have various systems of this type in stock. The delivery time for an individual system is currently around 3-4 weeks, depending on the production effort. Our core competence lies in supplying the customer with exactly what he really needs. Together with our customers, we work out customer-specific, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: new, Year of construction: 2023, power: 1,150 kW (1,563.56 HP), total length: 6,460 mm, total width: 1,600 mm, total height: 1,840 mm, Selling price: € 129.500, US$ 150.100 Current frequency: 50 Hz Bwedpfx Aoxfrz Ijfxst Voltage: 400