Single-shaft shredder 18.5 kW

Vecoplan VAZ120/105

Condition: used, Year of construction: 1991, VECOPLAN VAZ 120/105-U Waste Shredder / Crusher For sale: VECOPLAN VAZ 120/105-U waste shredder, in almost new condition. The machine has been 2025 year completely overhauled and technically upgraded and is fully operational and ready for use. The shredder is equipped with a PLC control system, enabling fault monitoring and advanced control functions. A power meter is installed for efficient energy monitoring. The system operates fully automatically. When the machine is empty, it stops after a preset time, eliminating the need for manual shutdown. Once the crushing process is completed, the machine shuts down automatically. If the shaft becomes difficult to rotate, the press stops applying pressure while the rotor continues rotating. As soon as the shaft can rotate freely again, the pressing process automatically resumes without going to start pozition. This significantly improves operating efficiency and reduces unnecessary wear on machine components. If the load does not decrease, the press retracts. Should the load still remain high, the crusher shuts down automatically and indicates an overload condition, protecting the machine from damage and further wear. Technical Specifications: • Machine type: VECOPLAN VAZ 120/105-U Waste Shredder • Application: shredding particleboard and solid wood, plastic, paper and similar waste • Drive power: 18.5 kW • Introduction: Ksdpfx Abjt Dh T Ds Todh up to 1000 kg/h for particleboard waste • Screen diameter: 25 mm • Rotor: Ø 235 mm (circle), width 1070 mm, 120 rpm • Motor: Rated power: 18.5 kW Rated current: 36.5 A Speed: 1455 rpm Voltage: 400 V / 50 Hz Protection class: IP54, Type B3 • Drive system: V-belt drive with hydrodynamic turbo coupling (soft start, overload protection) • Hydraulic unit: Drive power: 1.0 / 1.4 kW Maximum pressure: up to 180 bar • Feed opening: 1200 × 1050 mm • Extraction nozzle: minimum air velocity 28 m/s Dimensions & Weight: • Weight: approx. 2300 kg Condition: fully operational after maintenance.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Kdjdpfshclffjx Ab Tjh Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: ready for operation (used), Year of construction: 1989, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 10791/89, overall weight: 2,500 kg, rotor diameter: 235 mm, number of blades: 27, total length: 2,550 mm, total height: 1,350 mm, control cabinet length: 300 mm, control cabinet width: 800 mm, control cabinet height: 1,200 mm, total width: 1,900 mm, rotor length: 1,050 mm, rotor width: 235 mm, power: 18.5 kW (25.15 HP), type of input current: three-phase, rotational speed (max.): 120 rpm, hopper volume: 2 l, rotational speed (min.): 120 rpm, rotor flight circle: 235 mm, filling opening width: 1,200 mm, filling opening length: 1,050 mm, ejection height: 500 mm, year of last overhaul: 2025, working width: 1,050 mm, sieve perforation: 25 mm, warranty duration: 6 months, input voltage: 400 V, torque: 10,000 Nm, blade width: 40 mm, Equipment: CE marking, Intake length: 1200 mm intake width & rotor length: 1050 mm ᴓ rotor: 235 mm nº de cutters: 27 un (40x40 mm) rotor speed: 120 rpm Motor: 18,5 kW Voltage: 400 V Frequency: 50 Hz ᴓ screen: 30 mm - other sizes available Machine weight: 2500 kg Machine fully revised; including all wear parts new Scope of supply includes: Ksdpfxsxrzzqe Ab Tjdh - Infeed funnel - Steel support - Electric control pannel - Wiring between shredder and electrical cabinet

Condition: used, rotor length: 1,000 mm, power: 15 kW (20.39 HP), rotor flight circle: 250 mm, Inlet opening: 1,050 x 1,200 mm Rotor flight circle: 250 mm Drive: 15 kW Kdsdpfx Aor T I Tljb Toh

Year of construction: 2025, condition: new, The LITech hammer mills HM 120/200/300/400 are ideal for the pre-shredding of medium-hard, hard-tough & brittle materials such as floors, precious metals, electronic scrap, epoxy resin, gypsum, glass, catalysts, ceramics, clinker, coal, coke, minerals and much more many more!! Kedpfx Abjg Ay Dhs Todh

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Kdedpfx Abeghgq No Toh Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. Kedpfx Ajbqt Arsb Todh For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request.

Condition: refurbished (used), functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Technical specifications baler: Kedsxl Rqbjpfx Ab Todh Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: new, Year of construction: 2024, A vineyard post roll forming machine is used for vineyards and orchards to produce the stakes and posts. Normally, grape posts are 1.5-2mm thickness. The production line consists of Decoiler, Servo Feeder Straightener, Press, Stamping Tool, Roll Form Machine and Shear. Kedpfxet Tcz Uj Ab Todh

Condition: reconditioned (used), Year of construction: 2005, Allgaier Screening Machine | Gyratory Screen Type type ARSM 33-10 completely reconditioned - Make: Allgaier - Type: ARSM 33-10 - Year of construction: 2005 - Condition: completely reconditioned - Screening capacity: up to approx. 200 - 220 srm/h (for wood chips and sawdust) - Screen area: 10.0 m² x 2 = 20 m² per screen mesh size - Fractions: 3 - Screen decks: 4 pieces + 1 piece intermediate floor - Drive power: 7.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 8,000 kg - Machine colour: RAL 6011 Reseda green - Screen inserts free selectable - Design of outlets according to customer requirements Screening machine completely refubished (overhauled). Spherical roller bearings and spring struts are new. Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - wood pellets Kodpjq Iivaofx Ab Tedh - charcoal - Waste wood - bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Oscillation screen | Wood chip screener | Screening machine for wood chips