Surface planer

Vema AHM 52

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Gedpfek H Ic Usx Afnsbh Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: ready for operation (used), Year of construction: 1972, Disc diameter: 600 mm Grinding table size: 670 x 280 mm Grinding table swivels up/down: 30/45° Grinding disc drive motor: 1.5 kW Gbjdpjvkdqiofx Afnjh Space required: 870 x 650 x 1280 mm including extraction SZ 1, 380 V, 1.5 kW

Condition: excellent (used), SCM S520 Thickness Planer Working width: 520 mm Working height: 250 mm Adjustable feed speed: 4 steps Cutterhead with traditional knives 4-knife cutterhead Power: 4 kW Weight: 670 kg Gbsdpfxox Hfg Nj Afneh

Condition: used, Year of construction: 1992, with Centrofix cutterhead infinitely variable feed 2 x outfeed rollers used, good condition, top equipment Make: Maka Type: DH 630 A Year of manufacture: 1992 Machine no.: 9201891 GS wood dust tested Motor: 6.7 kW Planing width: approx. 630 mm Planing height: approx. 300 mm 1 adjustable table roller Segmented pressure beam Segmented infeed roller 2 steel outfeed rollers Feed speed: 0-21 m/min, stepless Number of knives: 4 pcs Knife system: Centro-Fix reversible knives Digital display for planing height Electric height adjustment with manual fine adjustment handwheel Extraction port: Ø 150 mm Gbedpfx Ajxuv N Iofnsh Space requirement: approx. 1200 x 1200 x 1400 mm Weight: approx. 1000 kg Location: 97447 Gerolzhofen, loaded free of charge, unpacked Sale as is, as inspected, without warranty or guarantee

Condition: used, machine/vehicle number: 4/14242, Frank Floor Sanding Machine FSR used Engine power: 0,75 KW Voltage: 230 Volt Gjdpfxob Auu Rs Afnjbh 5 amps, 50 Hz, Machine no.: 4/14242 Dust bag Location: Ex warehouse Bitburg

Condition: reconditioned (used), Connected load 380V 13A 5.5kW main drive motor + 0.7kW feed motor, planing width 630 mm, Tersa cutterblock with 4 knives, stepless feed 6-18 m/min, star-delta switch, mechanical table height adjustment via hand lever, drive via cutterblock, fine adjustment by handwheel, mechanical digital display for planing height, 1x table roller, extraction connection 160 mm, 1x steel infeed roller, 1x steel outfeed roller. Gjdjxdl U Espfx Afnebh

Year of construction: 2004, condition: excellent (used), Four-side planer -max. planing width 23cm -max planing height 16cm Gbjdpfx Aehlp D Nofneh -2 pulling rollers in the table -chromed table - smooth regulation of the feed speed -2 pulleys from the top in front of the lower head, additionally a roller apparatus for short elements - 4 spindles: lower 5.5kW, right 5.5kW, left 5.5kW, upper 7.5kw The machine is in very good condition, little used, with spiral heads on the bottom right and left, with a Terssa knife head on the top.

Condition: excellent (used), cutting height (max.): 120 mm, cutting width (max.): 700 mm, Right-hand machine, machine number 188 Electrically adjustable hydraulic width adjustment Infinitely variable feed rate from 0-80 m/min 37 kW drive motor with V-belt pulley, motor tensioning rail, Various saw heads, shims, and saws Infeed table with individual trestles Gbedpfx Aov Raqxsfnoh Fixed outfeed table The machine has been completely overhauled and is in excellent condition.

Condition: used, Year of construction: 2000, Used feeder Year of manufacture: 2000 Suitable for Kündig Uniq edge sanding machine Technical specifications: Max. reach: 1050 mm Number of feed rollers: 4 Roller diameter: 120 mm Roller width: 60 mm Spring travel of rollers: 25 mm Speed settings: 8 (2/4/5.5/6.5/11/13/16.5/33 m/min) Motor power: 0.75 kW Connection: 400V/50 Hz Weight: 32.5 kg The console shown in the picture is not included in the scope of delivery! Gjdpfx Afsumpp Eensbh Location: Flörsheim Availability: Immediately

Condition: excellent (used), HA 4 surface planer planing width 450 mm total table length 2500 mm Feed table 1500 mm Gsdpfx Aoinkfnefnobh Machine height 820 mm Max. Chip thickness 15 mm Cutter shaft revolutions 4800 rpm Motor power 4 HP Weight 660 kg 3-piece cutterhead