Through drill

Vitap

Condition: used, Year of construction: 2018, power: 4 kW (5.44 HP), workpiece height (max.): 45 mm, TECHNICAL DETAILS Maximum workpiece thickness: 45 mm Minimum panel height: 10 mm Maximum panel height: 45 mm Edge banding unit: 1 MACHINE DETAILS Total installed power: 4 kW EQUIPMENT CE conformity Glue reservoir: For hot melt adhesive Lhjdpsz Ekbwefx Alzel The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 7247

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. Max. working width (mm) 3200. Min. working width (mm) 215 Lodpfeyyw S Rox Alzohl N. 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit (11 Spindles for each horizontal drilling head) N. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 4 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display. Total installed power (Kw) 62,7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: good (used), Code: 0481 Brand: VITAP Model: BM 13/S - CE Standard Multiple boring machine with 13 spindles for furniture, carpentry, panels, kitchens, bathroom cabinets and various - CE Standard Technical data: N°13 spindles Center-to-center distance between spindles 32 mm Total center-to-center distance between the first and last spindles 384 mm Table dimensions 600 x 400 mm Max drilling depth 70 mm Min spindle speed 2800 rpm Lodpsz Dkwvjfx Alzjhl Motor power 1,5 Hp Compressed air pressure 6/8 atm Overall dimensions mm 750 x 560 x 1200 h Weight kg 160

Condition: good (used), Year of construction: 1998, functionality: fully functional, number of spindles: 35, Multi-spindle drilling machine (dowelling machine), model from the Vitap Alfa 35 series. [1, 2] This type of machine is used in the furniture industry for precise linear drilling of holes for dowels (axes), shelves, connecting elements, and fittings in wooden panels (chipboard, MDF, solid wood). [1] Lhsdpfsz Ef R Tex Alzsl The main features of the machine in the image: Drilling head with 35 spindles: The long, green support arm (drilling spindle) has 35 parallel spindles with a distance of 32 mm between them (standard system for furniture). The drill bits alternate in a left-hand

Condition: excellent (used), functionality: fully functional, 6 drilling units with two heads two side heads Ljdpfx Aljz D Ac Rozehl spindles span 32mm max material length 2250mm magazine feeding manual regulation of units span rotated heads pneumatic top pressure drilling depth regulation

Condition: used, machine/vehicle number: 008576, X axis working area: 3000 mm Y axis working area: 1230 mm Main Electrospindle power: 3.6 KW Number of controlled axes: 3 axes Total number of drilling spindles: 20 Ljdpfxezylvzo Alzjhl Total number of tool changer positions: 4

Condition: good (used), Code: 0405 Brand: VITAP - ITALY Model: ALFA 21 Multiple boring machine for furniture, kitchens, custom furniture, bathroom furniture and various Lhsdpfeyrrhisx Alzol Technical data: N° 21 spindles - Centre distance mm 32 Max drilling depth mm 80 Table dimensions mm 860 x 500 Spindle rpm 2800 Motor power Hp 2,5 Tilting head 0-90° Operating pressure 6-8 atm Overall dimensions mm 950 x 800 x 1140 h Weight kg 300

Condition: excellent (used), functionality: fully functional, 21 spindles spindles right/left table dimensions 840x440mm 2 pneumatic clamps spindles span 32mm Ljdpfxjzz N Tmj Alzshl pedal control pneumatic setting vertical/horizontal

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 110053, functionality: fully functional, input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 5,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, workpiece weight (max.): 25 kg, number of axes: 3, total height: 1,600 mm, total length: 2,134 mm, total width: 1,286 mm, overall weight: 715 kg, Equipment: CE marking, documentation/manual, We offer this very good Vitap POINT2 machining center, year of construction 2011. Type: POINT2 Serial number: 110053 Year of construction: 2011 Weight: 715 kg Nominal supply voltage: 400 V Supply frequency: 50 Hz Nominal current: 8.9 A Max overload current: 0.008 kA 8 vertical drills 4 horizontal drills on X direction 2 horizontal drills on Y direction 1 saw blade Lodpfszzf Itsx Alzehl If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 690189, overall weight: 386 kg, total width: 1,150 mm, pressure: 6 bar, operating pressure: 6 bar, number of spindles: 35, type of input current: three-phase, Condition as shown in the pictures. Lhsdpfxjzyr Epe Alzsl

Condition: new, Year of construction: 2023, machine/vehicle number: 320542/B, functionality: fully functional, number of axes: 3, controller manufacturer: TPA, CNC Drilling and Milling Machine Manufacturer: Vitap Type: K3 New machine Through-feed processing, workpiece machining from below, and automatic workpiece return to the operator Develop an individual class: - With this machine, you can perform many different milling operations in addition to grooving and drilling, from simple edge milling to milling shapes and letters. - We do not limit your creativity. Easy entry into CNC technology: - TPA makes it easy for you: Whether drilling, grooving, linear milling, contour milling, or milling letters. - The CAD software clearly displays the machining operations. - Particularly clear is the programming of the work steps on the individual workpiece sides. - You can mirror machining operations with a mouse click. - You can either enter the starting points precisely or determine them by clicking on the virtual workpiece. Vitap Bar Nesting - efficient and time-saving - This patented software produces entire corpus elements from a long workpiece. - You insert the long workpiece, and when you remove the first finished element, the machining of the next element continues directly. The DDT feed system (double dynamic transport) - 2 clamps enable uninterrupted workpiece transport. - The operator inserts the workpiece until it reaches the stop. - Both clamps then grip the workpiece and position it precisely. - During machining, both clamps communicate with each other, so that clamp 2 grips before clamp 1 releases. - This ensures a constant feed rate even during linear milling. 3 controlled axes: - X axis - DDT feed - Y axis - Drilling head travel - Z axis - Drilling - Double "0" reference: New laser generation for detecting the beginning and end of the workpiece. The program can readjust the drilling from below to achieve perfect alignment in vertical and horizontal workpieces. The laser consists of a transmitter and receiver to avoid errors with dark edge material. - Side stops with rollers, consisting of a fixed and a movable part, mechanical digital readout with automatic alignment to the 0 stop for removal of up to 3 mm on the 0 line - Constant side pressing device for precise positioning to the 0 line - Automatic 4-position tool changer - Adjustable zero point - No workpiece length limitation - Monitor LCD TFT 20" - Industrial PC - Operator interface WSC with Lister, parametric tool, and parametric setup - Graphical programming CAD TPA EDI32, basic version - USB port - Storage of all files - Macro programming - Import DXF files Technical data - Number of independent, vertical spindles: 12 - Number of independent, horizontal spindles on the X axis: (2+2) Lhedpezvduuofx Alzjl - Number of horizontal drilling spindles on the Y axis: (2+2) - 1 saw (100mm) - Electro spindle 5 kW with ISO30 taper (RPM [contact removed]) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited, Y 1250 mm, Z 50 mm - Min. workpiece dimensions: X 270, Y 150 (70op), Z 3 mm - Feed rate: 25 m/min - Spindle speed: 3600 RPM - Saw speed: 7000 RPM - Max. horizontal tool: 12mm - Max. drilling depth horizontally on the X and Y axis: 35mm - Max. drilling depth vertically: 43 mm - Max. vertical tool: 35mm - Motor: 1.7 kW - Adjustable zero point for 4-sided formatting - CE compliant Optional against additional charge