Paint spray device in top condition

Wagner Cobra 40 - 10

Condition: new, Year of construction: 2025, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Flow rate at 200 double strokes: 2 l/min Kfedpfxebuqn He Agzea max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Kodpox Dax Esfx Agzsfa Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 Ksdpfxoxwurys Agzofa - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: new, Year of construction: 2025, Machining center with 4 CNC controlled axes for machining profiles made of aluminum, PVC, and steel Machine frame in stable welded construction, stress-relieved annealed, with hardened rail guides Protective cabin over the entire machining length Pneumatically opening safety door Milling spindle: 3.8/4.6 KW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with tool holder ISO 30 with minimum quantity cyclic spraying for tools with fill level monitoring Tool magazine: 5 positions, on the left side of the machine bed, for holding drilling, milling, and thread cutting tools, angle head, disc milling cutter up to Ø 150 mm Kfodpfxjwrcwpe Agzja Workpiece clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece positioning: One pneumatic reference stop each on the left and right of the A-axis Travel paths: X - Axis 3500mm Y - Axis 370mm Z - Axis 348mm A - Axis ±90° Travel speeds: X - Axis 70m/min. Y - Axis 30m/min. Z - Axis 30m/min. A - Axis 60°/sec Max. working areas: X - Axis 3270mm Y - Axis 250mm at 0° 116mm at ±90° of the A-axis Z - Axis:170mm at 0° 200mm at ±90° of the A-axis Operating software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side machining by swiveling the A axis 90°-0°-90° Face machining using a disc cutter Operating modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication system: Automatically controlled central lubrication for all axes, ball screw drives and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse + keyboard Connection data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, Delivery without power cable Pneumatic: pressure 6 - 8 bar Dimensions and weight: Length: 5800mm Width: 1640 mm Height: 2000mm Weight: 2000 kg incl.: graphical programming software CM3D/CAD3D barcode reader additional network connection incl. remote maintenance/diagnosis for 1 year

Condition: used, machine/vehicle number: 008030, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Kjdpfxewvq Hge Agzofa Operating Units: 8 nr

Condition: new, Year of construction: 2024, table length 2000 mm Kfodpfsv Htkdjx Agzja table width 1000 mm stroke height 400 - 1010 mm weight max. in kg 300 kg weight of the machine ca. 220 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 430/16, Powder Coating Line (Pass-through Polymerization Oven for Powder Paint, complete with Conveyor System and Dual Paint Booth) Basic technical data of the oven: - Max. external dimensions (L x W x H): 9.6 m x 6.6 m x 2.5 m - Weight: approx. 9,000 kg - Max. operating temperature: 220°C - Max. burner power / GZ50/: 2 x 160 kW - Fan motor power: 24 kW - Power supply: 3 x 400 V +N +PE, 50Hz Maximum workpiece dimensions: - L = 2.0 m - H = 1.0 m - W = 0.6 m Included with the machine: Complete technical documentation + parts lists. The oven is integrated with an overhead conveyor system by JOKŚ. The conveyor system includes 42 m of tracks, along with a drive system and lubrication system; control system with speed regulation in the range of 0.5–1.5 m/min. APAR AR200 speed recorder, LG iG5A series inverter, EATON MFD-AC-CP4 manual power/communication module, MFD-CP4, MFD-80. Kodpfx Aou Hib Negzsfa Manual powder coating booth; pass-through, two-station. Paint access windows on opposite sides, offset. Max. dimension of painted workpiece: - L = 2.0 m - H = 1.0 m - W = 0.6 m A linear overhead transport system runs through the center of the booth. The booth includes 3 tanks adapted for powder recovery/color change, filtration system based on cartridge filters. End tanks equipped with screens.

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Kjdew Nx A Iopfx Agzefa Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Motor power: 5.5 kW, Weight: 1,040 kg

Condition: used, Year of construction: 1996, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 272 / 9-604, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, main saw diameter: 300 mm, total width: 5,700 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee. Kfsdpfx Agjw I Er Tezea

Condition: used, Air-driven piston pump, * No. 1: K. Schmidt type DC 30.20/4, * No. 2: BEDE AIRLESS, max. approx. 36 l/min. Kjdpolf H S Uefx Agzjfa