Pillar Drilling Machine

WEBO Varia 40

Condition: good (used), throat depth: 380 mm, drilling capacity: 60 mm, spindle mount: MK 4, Drill press Fab. WEBO Typ. Varia 40 Gjdpjru Hbdjfx Ah Ejbw Technical data Make WEBO Type Varia 40 Year of manufacture unknown. Projection: 380 mm Drilling capacity in steel: 60 mm Tool holder: MK 4 Table surface: Dm. 500 mm Table height adjustable 490 mm Column diameter: 250 mm Spindle speed: 60 - 1250 rpm Motor power: 3.3 KW Weight: approx. 1.1 t Dimensions L 0.70 x W 1.1 x H 2.5 m All data without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: used, Year of construction: 1976, machine/vehicle number: 5591, bore capacity in steel (diameter):13 mm Godpfx Aocxxvbsh Esbw throat:185 mm bore stroke:70 mm taper MK:Bohrfutter 1 - 13 mm turning speed range:400 - 4000 U/min speed steps work spindle:6 table surface area:200 x 250 mm distance spindle /table:170 mm column diameter:65 mm total power requirement:0,22 kW weight of the machine ca.:0,08 t dimensions of the machine ca.:0,75 x 0,3 x 0,65 m

Condition: good (used), Drilling machine IMATEC AV-32 Drilling capacity in steel ST 60: 32 mm Spindle taper: MK 3 Spindle stroke: 150 mm Infinitely variable spindle speeds: 80 – 1170 rpm Feed Godpfx Aov A S Rhsh Ejbw Arm reach: 290 mm Maximum distance table – spindle: 780 mm Table with 2 T-slots: 480 x 400 mm Height adjustable via rack and pinion with hand crank Drive: 400 V / 0.9 / 1.3 kW Required space approx. W 600 x H 2100 x D 900 mm Weight approx. 420 kg

Condition: like new (used), Equipment: type plate available, Used stainless steel agitator tank on stainless steel pallet with rollers and propeller agitator Type: SBPA1000RWP Article number: 10862 Volume: 907L Type: Upright design on stainless steel transport pallet with rollers Design: Single-walled, at least 2mm wall thickness Material (in contact with media): 1.4301 stainless steel Surface: Satin finish on the outside, BA (IIId) on the inside Inside weld seams: Pickled, passivated and brushed Operating pressure: Atmospheric Top: Central crossbeam with two hinged lid halves Bottom: Dished bottom with discharge bead Container dimensions: Container diameter: 1080mm Total height: 1915mm Total width: 1200 x 1150mm Distance from drain to floor: 400mm Height of feet: 240mm Equipment: 1x hinged lid, central crossbar with two hinged lid halves, stainless steel sheet metal grates below the hinged lid as protection against intrusion (removable), locking function (lids can be locked open) 1x reserve nozzle DN50 DIN11851 on the top floor Gjdpfx Ahev Ha Uij Esbw 1x DN50 DIN32676-A Tri-Clamp ball valve as outlet fitting, PTFE seal 1x stainless steel transport pallet 4x swivel castors, 2x with brake 1x nameplate Agitator: Propeller agitator Suitable for viscosities up to 500mPas Make: Schwarzer Rührtechnik GmbH Type: SRT8-1500 Power: 0.75KW Speed: 1410 UPM Operating voltage: 3PH 400V -Solid agitator shaft attached to the agitator motor, not removable -Agitator shaft balanced for concentricity in Speed range -1 mixing propeller Ø 150mm screwed into the end of the agitator shaft. Mixing propeller made of cast stainless steel, highly polished -4x neoprene rubber metal buffers, motor mounted in a swinging manner, hardness grade 70 according to Shore, neoprene resistant up to 100°C Agitator control: CEE plug switch on the container, on/off switch, emergency stop, zero voltage release and phase inverter Continuous speed control of the agitator motor using a compact, external frequency converter, Optidrive brand. With digital display of the frequency or speed. Incl. potentiometer, on/off switch. Pre-programmed for agitator operation. Operating voltage 3PH 400V Mounted on the container on a stainless steel holder.

Condition: new, bore capacity in steel (diameter) 28 mm throat 320 mm bore stroke 150 mm Gbedpfx Ahofhk Ufo Ejw spindle taper MT 3 MK table: 500 x 350 mm column diameter 105 mm turning speeds 75 - 3010 U/min total power requirement 0,9 / 1,2 kW weight of the machine ca. 235 kg. range L-W-H 1740 x 670 x 850 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, Out of insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Speeds infinitely variable via potentiometer 80-2010 rpm automatic feed 0,1--0,2--0,3 Digital speed display Coolant pump Thread cutting function with foot switch working light Pinol stroke 150mm throat depth 300mm Mounting MK 4 Röhm Supra 3-16mm drill chuck Table clamping surface 330x320mm Height of the machine 1930mm Gjdpfx Ahjrfxqle Ejbw Weight approx. 350kg 3KW power 380 Volt

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Erlo SEAR 25-RS drill, gear drill with automatic feeds, includes threading system, spindle speeds 64-3060 rpm, with chuck and protection, machine in very good condition, year 2006 Gbodpfx Ajv Rnhxeh Eow

Condition: used, Drill press, drill press, stand drill, pillar drill Gbsdscpbwbjpfx Ah Esw -Table size: 500 mm -spindle taper: MK4 -Projection: 400 mm -Speeds: 38-750 rpm -Feed: 0.08-0.13 mm/rev -Columns: Ø 220 mm -Spindle stroke: 235 mm -Transmission: -Dimensions: 640/1020/H2730 mm -Weight: 965 kg

Condition: excellent (used), bore capacity in steel (diameter) 35 / 45 mm throat 330 mm bore stroke 200 mm morse taper MK 4 table diameter 600 mm spindle turning speed - stepless 80 - 1800 U/min table adjustment - upper 450 mm spindle stroke 400 mm Gbedpfx Aount Rpsh Eow total power requirement 2,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 2,5 x 1,2 x 0,8 m automatic feed.

Condition: used, Two-spindle drilling machine, row drilling machine, drilling machine, floor drilling machine, column drilling machine, column drilling machine Godpfx Aheb A Ikij Ejbw -Spindle mount: B13 -Table size: 300 x 1100 mm -Projection: 150/180 mm -Spindle stroke: 50/70 mm -Weight: approx. 200 kg