Pipe Welding System

Weil LRSA 250

Condition: used, Year of construction: 1997, pressure 40 t throat 300 mm stroke 630 mm dayligth 900 mm table surface area 620 x 520 mm hole in the table 150 mm Nedpfxovuuckj Alcewh table height over floor 600 mm ram surface 150 mm total power requirement 15,0 kW weight of the machine ca. 4,5 t required space 1,0 x 1,9 x 3,0 m permitted for manual loading according to the CE Regulations with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, pressure 55 t throat 250 mm stroke 10-90 mm table-size 640 x 495 mm no. of strokes 120 Hub/min ram adjustment 55 mm Nsdecp Apyopfx Alcowh ram surface 290 x 210 mm ram hole 40 H7 mm hole in the table 220 x 190 mm T-slots 22 clamping plate 620 x 485 x 65 mm total power requirement 4,5 kW weight of the machine ca. 3,4 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 m

Condition: refurbished (used), 50 m³ / 50,000 l fire water tank according to DIN 14230 Tank volume: 50,000 liters / 50 m³ Length: approx. 10,700 mm Diameter: approx. 2,500 mm Weight: approx. 8,000 kg Material: Steel, grade S 235 JRG 2 Underground tank for underground storage, single- or double-walled, suitable for areas that can be walked and driven on (load class SLW 30) with 1 dome (outer diameter 720 mm) with a blind cover, gasket and screws. Available new or used, immediately! The container has been emptied, cleaned, completely overhauled and tested for leaks by us as a specialist company. The container complies with the requirements of DIN 14230 (Underground fire water tank): - Fire water suction connection according to DIN 14244 with a mounted fire hose coupling / fixed coupling A according to DIN 14319 in form B, without a level gauge connection - Vent flange stub in DN 100 with cap, with a total length of approx. 1,300 mm, suitable for 800 mm of ground cover and 500 mm above ground Nwjdpfx Alshh Sprocjh - Externally coated with bitumen for protection - If required, we can coat the tank with an internal full coating based on bitumen or epoxy resin (against corrosion) - It is also possible to line the container with a plastic inner liner Cost-effective delivery with our own truck is possible. Simply let us know the delivery address, and you will immediately receive the exact freight costs. Inspection is possible at any time by prior appointment. We can also offer trade-in and purchase of tanks/containers of all types. Please contact us for this. We also have the following sizes of these tanks constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, A used four-column automatic punching press MABU with MPC200 control in very good technical condition. Compressive force 30° before UT: 250kN Stroke rate, infinitely variable: 80-400 rpm Stroke adjustment: 7-62mm Tool holder: Diameter 40H7x90mm Nwsdpfxjuh U Ets Alcjh Clearance between the front/side uprights: 404/334mm Further tech. Data see pdf- document. Tech. Data and dimensions: Errors excepted.

Condition: used, pressure 10 t stroke 400 mm feed down 200 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm Nwsdpfx Asd R Szuelcoh total power requirement 8,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. m

Condition: used, Year of construction: 2024, pressure 70 t throat 325 mm stroke 800 mm die cushion capacity 35 t drawing stroke 280 mm ejector stroke 240 mm rapid traverse - down 650 mm/sec working feed 58-199 mm/sec dayligth 1050 mm table surface area 900x580 mm ram surface 460x460 mm total power requirement 45 kW weight of the machine ca. 6,3 t Nsdsvn U Sxopfx Alcowh dimensions of the machine ca. BxTxH 1000x2200x4000 mm

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Nedpelc N Ryefx Alcewh

Condition: used, Year of construction: 1991, pressure 63 t throat 325 mm stroke 560 mm dayligth 700 mm table surface area 640 x 640 mm die cushion capacity 25 t die cushion stroke 200 mm die cushion area 450 x 450 mm Nwjdpjvuuacsfx Alcjh table height over floor 800 mm ram surface 560 x 560 mm oil volume 450 l total power requirement 15,0 kW weight of the machine ca. 7,0 t required space 1,2 x 2,0 x 3,1 m year of manufacture 1971 - overhaul 1991 with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation

Year of construction: 2023, condition: used, sheet width 300 mm coil weight 1 t coil internal dia. 375-550 mm Njdpfx Ajlp U Tbjlcswh coil outside dia. 1600 mm weight of the machine ca. 0,5 t dimensions of the machine ca. 1500x1500x1900 m

Condition: ready for operation (used), A high-performance crank plate shear with a low operating hours count is offered. Design: all-steel welded construction, stroke rate: 50 strokes/min, control FM 1S, backgauge manual or motorized (MAH 51/52), pneumatic hold-down device, rear safety light barrier. Inspection possible by arrangement. Nedpfx Asx Hfgvolcjwh