WEIMA WLK10 55KW

WEIMA WLK 10

Year of construction: 2006, condition: used, Single shaft shredder Weima WLK10 main motor 55kw rotor lenght 100cm the machine is 100% efficient Lrjdpfx Aei Ew Tbegven

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Lsdpfx Asu Damdjgvsrn

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 Lredpfetpcn Ujx Agvjn main motor 55kw rotor length 100cm the machine is 100% efficient

Condition: good (used), Year of construction: 2007, Single shaft shredder Weima WLK10 main motor 55kw rotor length 100cm the machine is 100% efficient Lredpfx Aotpcpnsgvon

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: Lrjdpfx Aewvqklegvon • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Year of construction: 2006, condition: used, Single shaft shredder Weima WLK10 main motor 55kw Lrodpji Ew Tmefx Agvon rotor lenght 100cm the machine is 100% efficient

Condition: used, Year of construction: 2008, functionality: fully functional, LOOS International steam boiler / steam generator DF 1500 (06/2008), complete with Weishaupt oil/diesel burner. Capacity 1500 kg/h, PS 31 barg, PT 56 barg, TS 238°C, total volume 250 L, CE 0036. Supplied skid-mounted with control cabinet and instruments (as pictured). In stock, ready for loading. Sold to the first buyer who confirms with advance payment. Lrsdpfoyg Rw Eex Agven

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Lsdjn Tpmuepfx Agvjrn

Year of construction: 2025, condition: excellent (used), functionality: fully functional, We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 Lrjdpfx Agsxxim Isven • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Ledpfx Agew Am Nqsvern Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.