Moulder

WEINIG HYDROMAT 22 BL

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, working width: 220 mm, planing height: 140 mm, spindle diameter: 50 mm, planing width: 220 mm, working height: 140 mm, power of feed motor: 15,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, type of input current: three-phase, number of spindles: 7, input frequency: 50 Hz, Weinig Hydromat 22 BL 7 spindles, Working width: 220 mm, working height: 140 mm, spindle diameter: 50 mm, feed: 15 kW / 6 - 60 m/min, Beesjj3Vck9 Spindle arrangement: 1-bottom (7.5 kW) with hydraulic clamping 2- Right (11 kW) 3-Left (11 kW) 4-Top (11 kW) 5-bottom (7.5 kW)-with hydraulic clamping, straight jointer and profile jointer 6-Top (11 kW) with hydraulic clamping, straight jointer 7-bottom (11 kW) - with hydraulic clamping, straight jointer and profile jointer 6 driven rollers in the table Itsdpfxeulnr As Abvjh

Condition: excellent (used), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG Cross Conveyor HighMech E-1, equipped with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG Accelerator Model 814 Short infeed table with heavy-duty 4-roller feed unit Planer/moulder with reinforced KASCHWIG three-sided soundproof enclosure • Max. working width: 230 mm • Max. working height: 160 mm • Electronic feed, frequency-controlled, 8–80 m/min • Feed motor 18.5 kW • 1st spindle bottom 11.0 kW • 2nd spindle right 11.0 kW • 3rd spindle left 11.0 kW • 4th spindle right 11.0 kW • 5th spindle left 11.0 kW • 6th spindle top 15.0 kW • 7th spindle bottom 11.0 kW • 8th spindle top 15.0 kW • 9th spindle bottom 15.0 kW • 10th universal spindle 11.0 kW (four-sided) • Spindle speed 6,000 rpm • Spindle diameter ø 50 mm • All spindle motors equipped with NEW motor start/stop brake units • Pneumatically supported top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced spacing between feed rollers • Hard-chromed table plates • Hard-chromed fences • Pneumatically supported side pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Connected load approx. 145 kW / approx. 400 A • Free-standing electrical cabinet • Operating instructions, spare parts list and wiring diagram included • Machine sold without cutterheads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm Itjdpewvqkljfx Abvoh • Height: 1,800 mm • Weight: approx. 8,500 kg Factory-new WEINIG components installed: NEW horizontal/vertical spindle NEW counter bearings All spindles with HL bearings All motors newly fitted NEW electronic motor soft start/brake devices NEW hard-chromed table plates NEW hard-chromed fences Many other new parts fitted in the machine Condition: see attached photos – technically in excellent condition Infeed mechanization unrefurbished – complete – fully functional Payment: Net cash before loading Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Errors and prior sale excepted.

Condition: excellent (used), Year of construction: 1992, Weinig Hydromat 22 BL planer with destacker Year: 1992 Feed: 60 m/min Heads: 1. lower – 11 kW 2. right side – 7.5 kW 3. left side – 7.5 kW 4. upper – 11 kW 5. lower – 7.5 kW 6. upper – 7.5 kW 6 feed rollers in the table Feed motor – 15 kW Planing width – 170 mm Planing height – 120 mm Itodoyymqvopfx Abvjh Machine mounted on an elevated platform.

Year of construction: 1987, condition: ready for operation (used), A Weinig four-sided planer including automation, double cross-cut saw, infeed and extraction system is available. 1) Four-sided planer Weinig Hydromat 22 BL with automatic lubrication, year of manufacture: 1987, working width: 220mm, working height: 140mm, number of heads: 7, head arrangement: bottom/right/left/right/top/bottom/bottom, spindle diameter: 50mm. 2) Kellfass automation unit consisting of double cross-cut saw, length: 5000mm, buffer cross conveyor and pneumatic roller infeed. On-site inspection is possible. Itjdpsv T Apcefx Abvoh

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location Ijdpfx Abev Si Szjvoth

Condition: ready for operation (used), The item of my auction is a conveyor belt with a length of 4.5 m and a belt width of 0.6 m. Possibility of transport. Itedexgndhepfx Abvjh

Condition: new, Year of construction: 2022, Diameters 40-140mm Engine 2.2kW Itsdpsdprvuofx Abvjh Price per 1 piece

Condition: good (used), Year of construction: 2000, Weinig High Mech E6 infeed + A5 outfeed + stacker 1. Weinig pack infeed roller conveyor. 2. Weing pack tilt 3. Weinig flat chain cross feed conveyor with single board feeder. 4. Weinig reject sorting unit with roller tracks. 5. Weinig EM814 moulder infeed with flat chain feeder. 6. Weinig outfeed 3m belt accelerator conveyor. 7. Roller conveyor with cross feed chain kickers. 8. Weinig cross feed buffer belt conveyor. 9. Weinig flat chain stacker with scissors lift roller conveyor. 10. Weinig pack outfeed roller conveyors. Itedpfxswgbw Re Abvsh Possible to offer with additional Weinig bundling system if needed.

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Iedpopqxnxsfx Abvjth 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: used, first registration: 03/2013, color: grey-black, Year of construction: 2013, gearing type: other, LICENSE PLATE: XA020AJ TITLE: TECNOKAR SKIP LOADER SEMITRAILER WITH CRANE REF: 25R14 YEAR: 03/2013 AXLES: 3 MAXIMUM LENGTH: 9.60 m ITALIAN / FOREIGN: Italian CAPACITY: 25,900 kg - TRAILER: 38,000 kg fully loaded BODY TYPE: skip loader EQUIPMENT: HYVALIFT 30.67 SK EXTENSION: yes SWING: yes ROLLERS: retractable ADR: no BODYWORK COMPATIBILITY FROM: 5.00 m + 0.20 m TO: 7.60 m + 0.20 m SUSPENSION: pneumatic Iedpfox Twfqox Abvjth BRAKES: disc TYRES: 385/65 R22.5 ACCESSORIES: - PENZ 15ZRT8.50 folding crane, year 2012, 1 extension on the 1st boom and 2 extensions on the 2nd boom - joystick - GUSELLA SHZ305/K/0 6-tine grab, year 2012, capacity 300 l, weight 428 kg with integrated rotator REFURBISHED: no INSPECTED: no TYRE CONDITION: 40% Subject to errors and/or omissions Displayed prices do not include VAT. Please contact our sales team for up-to-date pricing and conditions. For more information: Loris: 3484773001 URL: #theskiploaderspecialists SCARRABILI AURORA operates in the buying and selling of industrial and commercial vehicles, with a specific focus on the waste management sector. Specialists in trucks, trailers, and skip loader equipment. Stock of over 50 trucks and more than 150 bins, containers with and without skip loader cranes, ready for immediate delivery. E.&O.E. Due to the large number of listings and details provided, Aurora recommends verifying the accuracy of the data with sales staff.