Used Horizontal band saws - automatic - cutting range 0-299mm for sale (101)

Condition: used, Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display Cjlnovx Ux Te Eg Nrjrb - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: excellent (used), FORTE metal saw type F 250 -cutting at an angle Crelevy Dbajn Eg Nrjb -EU transport 300 Eur

Condition: not inspected (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 6421101054, saw band length: 3,180 mm, saw band width: 27 mm, total height: 2,000 mm, total length: 4,500 mm, total width: 2,250 mm, cutting capacity: 260 mm, cutting range round at 90°: 260 mm, overall weight: 1,500 kg, Object Type: Automatic Band Saw Coln Egev S E U So Nrsrb Manufacturer: KASTO Type: KASTOverto A 2 Year of Manufacture: 2011 Machine Number: 6421101054 Condition: Functional (untested) Delivery Conditions: Free on truck Availability: From week 31 - 2025 Location: 8074 Raaba, Austria Can be viewed live: Yes Technical Specifications: • Control System: Kasto BasicControl • Cutting Range 90° Round: 260 mm • Cutting Range 90° Flat: 320 x 260 mm • Material Feed: Single 0 - 900 mm, Multiple 0 - 9999 mm • Cutting Speed: 12 - 120 m/min (infinitely variable) • Saw Blade Dimensions: 3180 x 27 x 0.9 mm • Total Power Requirements: 2.5 kW • Operating hours: As of March 2025 – approx. 10,000 The current operating hours are approximately 4,775, however, the control system was replaced in 2019, and these operating hours were lost during this time. Since the machine is still in use, the operating hours will increase slightly. • Further technical specifications – see data sheet Scope of delivery: • Roller conveyor (dimensions L x W x H approx.: 2,000 x 750 x 1,350 mm) • Chip conveyor Dimensions & weights: • Installation dimensions L x W x H approx.: 4,500 x 2,250 x 2,000 mm • Weight approx.: 1,500 kg including roller conveyor If you have any questions or would like to arrange a viewing, please feel free to contact us. Additional information: • Upon request, we can offer transport to the destination. • The quoted price is net and excludes VAT. • This product is sold without any warranty! • This product is sold exclusively to businesses! • Technical data is provided without guarantee. • Subject to prior sale.

Condition: used, AMADA H250W saw Crsln Egev A H T Rj Nrjb very good condition fully functional

Condition: good (used), Model S-300HB Capacity 300 mm (12") 300 x 250 mm (12 "W x 10 "H) Cjln Ejuaxfneg Nrerb Bundle Cutting Width 145 to 230 mm (5.7" to 9") Height 30 to 130 mm (1.2" to 5") Blade Speed 20 to 100 m/min (65 to 330 fpm) (INVERTER) Motor Blade Drive 3.7 kW (5HP) Hyd. Pump 0.75 kW (1HP) Coolant Pump 0.1 kW (1/8HP) Blade Size 3820 x 34 x 1.1 mm (150" x 1.3" x 0.042") Blade Tension Hydraulic Index Length 400 mm (16") 400 mm x 9 times (16" x 9) Machine Weight 1550 kg (3417 lb) Floor Space (L x W) 2100 x 2200 mm (82.6" x 86.6")

Condition: excellent (used), Processing: Bandsawing machine Working range: up to Ø 250 mm Cjln Egeu Nt Nvo Nrerb Single feed: 3 to 400 mm Cutting speed: 11 to 110 mm/min Total capacity: up to 850 mm Material support: up to 5000 mm

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, machine/vehicle number: 6459102078, Fully operational machine, automatic belt tensioning, oil mist and coolant lubrication, chip conveyor. Machine serviced by an authorized service center, with regular (up-to-date) inspections Machine dimensions length 1 755mm width 2 475mm height 1 570mm Total weight approx. 1 700kg Total drive power 5.0kW Frequency controlled saw motor power 3.0kW Cutting range in mm approx: Cutting range Ø 260mm Cutting range, flat (W x H) 260 x 260 mm Cjln Eeu Sz Ipsg Nrorb Smallest round dimension Ø 10 mm square, H x W 10 mm Single infeed length max. 750mm Multi-feed 9,999 mm Shortest cutting length 6 mm Smallest diameter to cut 10 mm Minimum resting piece length for single cut 15 mm Shortest resting piece length in automatic mode 100 mm Cutting speed continuously adjustable 20 - 100 m/min Blade dimensions 4530 x 34 x 1.1 mm Material support height 700 mm Cutting feed: infinitely adjustable

Condition: excellent (used), Cutting area round: 250 mm Cslnjir Avxo Eg Nrjrb Cutting area square: 250 mm Sawing band measures: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Sawing drive: 1 kW

Condition: new, Year of construction: 2025, saw band length: 3,660 mm, saw band width: 27 mm, cutting speed: 100 mm/min, cutting capacity: 280 mm, cutting range round at 45°: 220 mm, cutting range round at 90°: 280 mm, cutting width (max.): 340 mm, cutting range square at 90°: 260 mm, cutting range square at 45°: 185 mm, saw band speed: 100 mm/s, warranty duration: 12 months, power: 1.5 kW (2.04 HP), - Swarf Brush - Speed Controller / Inverter - Hydraulic Vice - Hydro-Mechanic Blade Tension - Blade Breakage Detection - Stop System / Blade Breakage Switch - Stop System - 1 Piece 120 cm + 1 Piece 60 cm Roller Stand / 1 Pc. 120 cm + 1 Pc. 60 cm Roller Table - Swarf Conveyor Crjln Eg Nsv Etd Ijrsb - Audio Warning System - Encoder Drive System / Material Feeding System With Encoder - Automatic Feeding and Cutting System With 8 Programs - Lighting System / Led Lighting TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS KME DG 280 Capacity 90° (mm) Capacity 90° (mm) Round Round Ø 280 Square Square 260 X 260 Rectangle Rectangle 220 X 340 Capacity 45° (mm) Capacity 45° (mm) Round Round Ø 220 Square Square 185 X 185 Rectangle Rectangle 210 X 150 Main Motor / Main Motor 1.5 kW /300 Nm Hydraulic Motor Hydraulic Motor 0.18 kW Coolant Motor Coolant Motor 0.12 kW Driver Motor Feeding Motor 0.37 kW Conveyor Motor Conveyor Motor 0.18 kW Band Saw Blade Size 3660 X 27 X 0.9 mm Material Feeding Height Feeding Height 760 mm Vice Maximum Opening Vice Maximum Opening 370 mm Vice Maximum Closing Vice Maximum Closing Zero Zero Vice Height Vice Height 210 mm Table Width Rolled Table Width 370 mm Height-Width-Length Height-Width-Length 1350 X 1500 X 2200 mm Weight Weight 1000 kg

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm table height 450 mm cutting speed 10 - 110 m/min Cjln Egjv Ehfaj Nrsrb total power requirement 3 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Fully automatic band saw - including chip conveyor

Condition: excellent (used), Saw blade dimension 4910x34x1.1 mm Cutting speed 20-120 m/min. Feed length single stroke 750 mm Max. Feed length 9999 mm Electrical equipment Supply voltage ~3x400V,50Hz,TN-C-S/TN-C Celnjtp Tcgs Eg Nrjrb Total connected load 8.5 kW Max. Fuse rating 25 A Protection class IP 54 Sound pressure level Production 280 78 dB Drive unit Type MDERAXX 100-32J B14 Supply voltage ~3x400V,50Hz Power 3 kW Nominal motor speed 1420 m/min. Hydraulic unit Type 92.001.048 (731-0507) Power 6.5 MPa/2.2 kW Coolant device Type 3COA4-12 Volume of coolant 40 dm3 MICRONISER possible Machine size LxWxH 2370x1600x2050 mm Machine weight Weight 1800 kg

Condition: used, Used Forte horizontal band saw Crjln Egsv E Ihne Nrjb More information to follow.

Condition: excellent (used), Year of construction: 2023, Functionality: fully functional, Used semi-automatic swivelling frame band saw, KASTOmicut U2.6, MFG: 2023, serial number: 6153102136, excellent condition, very little used, it will be delivered with the two rollers from the pictures. Universal, semi-automatic band sawing machine of very robust construction, designed for the rough use in workshops and capable to perform any cutting-to-length or miter cutting tasks (-45°/+60°) in the case of tubes, profiles and solid material. The infinitely adjustable cutting speed and the infinitely adjustable fully hydraulic cutting feed allow a sensitive and blade-saving cutting. Technical Data Cutting range 90° round: 260 mm Cutting range 90° flat (W x H): 310 x 260 mm Dimensions (L x W): 760 x 1620 mm Height, saw head lowered position: 1690 mm Height, saw head in highest position: 2040 mm Material support height: 950 mm Total weight: 510 kg Performance characteristics Total power: 2.0 kW Saw motor, power – frequency controlled: 1.5 kW Cutting speed infinitely variable – frequency controlled min 20 – 110 m/min Crolnsvyl Ihe Eg Nrjb Dimensions of saw blade: 3180 x 27 x 0.9 mm Saw blade guides: lateral guiding rollers and back slide bearings, interchangeable Material clamping: mechanical Cutting feed: hydraulic, infinitely variable Saw blade tension: mechanical Saw blade cleaning: by synchronously running, easy to interchange brush Electrical equipment: in accordance with DIN EN 60204. Supply voltage 440 Volt, 60 Hz. Control voltage 24 Volt, DC. Upon request other voltages at additional cost. Working Cycle (Semi-Automatic) Infinitely variable and fully hydraulic saw feed control Rotary table serving as material support Horizontal vice with quick adjustment and hydraulic short stroke Infinitely variable cutting speed 20 – 110 m/min via frequency regulated drive Coolant system with two coolant nozzles Automatic switch-off after end of cut and return stroke of the saw head by approx. 100 mm Infinitely variable mitre adjustment (-45° to + 60°) Infinitely variable saw blade arm adjustment Electrical protection of the saw blade covers (accident prevention rules) Synchronously running chip removal brush Glue anchors to dowel the machine Bi-metal saw blade, 4 - 6 teeth per inch Operating instructions manual according to the EU Machinery Directive and EN 82079 Price: 18.100 Euro + VAT, negotiable , FCA Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2013, operating hours: 38,000 h, Functionality: fully functional, machine/vehicle number: 10006247, space requirement width: 2,300 mm, space requirement length: 1,850 mm, space requirement height: 1,820 mm, net weight: 1,850 kg, The Behringer HBE261A Dynamic automatic band saw cuts a wide range of materials, from profiles and pipes to solid materials. Cutting range 90° round 260 mm Cutting range 90° flat 300x260 mm Minimum circular sawing size 10 mm Minimum flat sawing size 10x8 mm Crolsv Ilggon Eg Nrob

Year of construction: 1986, Condition: good (used), machine/vehicle number: 120 603, cutting area round: 250 mm cutting area square: 250 mm sawing band measures: 3660 x 25 x 0,9 mm band speed: 20 - 70 m/min sawing drive: 1 kW Cslnjf S Ilys Eg Nrjrb space needed: 1900 x 1450 x 1250 mm weight: ca. 850 kg

Condition: reconditioned (used), Functionality: fully functional, cutting capacity: 150 mm, saw blade length: 300 mm, cutting range round at 45°: 150 mm, The fully hydraulic high-speed production hacksaw has universal hydraulics for the exclusive or alternating cutting of thin and thick-walled profiles Cjlerrvgxon Eg Nrerb as well as solid material without changing the saw blade with the uniform tooth pitch of 3 or 4 teeth per inch. Pre-tensioned bow guide, closed oil hydraulics, triple swivel bearing, separate coolant system, infinitely variable hydraulic cutting pressure, lift-off movement and accelerated return stroke, equipped with infinitely variable mitre device as standard. mitre device as standard. Lifting of the saw arm in rapid traverse. Pendulum vice for perfect utilization of the saw blade. Longitudinal guide with ground and and hardened guide rails to transfer the cutting pressure forces to the saw frame. Automatic limit stop. Push-button operation for on, off and up functions of the saw arm Manufacturer KASTO Metal hacksaw Machine type WBS 150/170 U Drive power: 0,75 KW Stroke rates: 85/170 min Cutting speed: 16/32 m/min Universal hydraulics: standard Saw feed hydraulics Cutting range round: 150 mm Cutting range flat: 150/170 mm Mitre 0-45 ° Material support height: 700 mm Weight: 170 kg. Length/width: 770x700 mm Height: 1370 mm Saw blade dimensions: 300x30x1.5 mm Machine for notching Accessories. coolant device

Condition: excellent (used), Year of construction: 2008, Fully enclosed CNC double miter band saw machine with high cutting precision. This machine can make 90° cuts, as well as miter cuts left up to 45° and right up to 30° (60°) infinitely. Various miter settings as well as lengths and quantities can be programmed as required using the modern B&R touchscreen control. Cutting range at 90°: Round 230 mm; Rectangle 300 mm x 200 mm or 230 mm x 230 mm square Cutting range at 45° right Round 195 mm; Square 195 mm x 195 mm Cutting range at 45° left Round 200 mm; Square 155 mm x 155 mm Cutting range at 60° right Round 135 mm; Square 95 mm x 95 mm - Drive power: 1.5 kW//400V//50 Hz - Band speed: 20-120 m/min. continuously variable - Saw band dimensions: 2910 x 27 x 0.9 mm - Remaining piece length: 270 mm - Smallest ø: 5 mm - Material support height: 755 mm - Weight approx.: 1500 kg Croln Eg Nov Abg Eorob - Dimensions: 1850 x 2900 x 1600 mm

Condition: used, Year of construction: 1980, Forte UF 20 Year of manufacture: 1980 Technical details: x-travel: 950 mm y-travel: 255 mm z-travel: 250 mm Spindle mount ISO: 40 / MK 4 Speed range: 45 - 2000 / 12 step rpm Headstock swivels +/-: 90° vertical = 90° right/left ° Headstock swivels +/-: 45° vertical = 90° right/left ° Feed:: (table) Table feed: X/Y: 16 - 132 mm/min Feed:: (table) Table feed: Z: 8 - 66 mm/min Clamping table: 1200 x 300 mm Total power requirement: 5.4 kW Machine dimensions approx.: 1.6 x 2.0 x 2.0 m The spindle head can be swiveled out. Crslnsv E H Tij Eg Nrsb

Condition: good (used), Year of construction: 2006, saw band length: 3,700 mm, saw band width: 27 mm, cutting width (max.): 300 mm, cutting range square at 90°: 260 mm, net weight: 650 kg, Portal sawing machine with linear guide on two columns, capacity is max. 260 mm Ø or 260 x 300 mm rectangular. Machine is equipped with 6 meter roller conveyor + 6 meter push system PEHU on the other side. Machine is delivered with 5 pieces saw bands Croln Eg Novi H Rcjrjb

Condition: used, Year of construction: 2007, cutting diameter 260 mm saw band length 3660 x 34 x 1,1 mm capacity 90 degrees: flat 280 x 260 mm vice 280 mm turning speed range: 20 - 120 m/min work height max. 660 mm voltage 400 V total power requirement 3.75 kW weight of the machine ca. 1700 kg. dimensions of the machine ca. 2000 x 1520 x 1240 mm New price ~ 18.000 euros very few operating hours (!) Furnishing: - column guided band saw - fully automatic - Fully automatic vise system - Feed unit ensures accurate positioning of the material * Feed length - single stroke : 400 mm - hydraulic vise clamping - hydraulic saw blade tensioning Cslnsvb Ix Ee Eg Nrerb - 34 mm wide band saw blade. - Infinitely variable speed adjustment of the saw band - automatic chip conveyor - Spare bandsaw blades

Condition: used, Year of construction: 2003, cutting diameter 250 mm saw band length 3820 mm cutting width 300 mm dimensions of saw-band 3820 x 27 x 0,9 mm feed length 2000 mm/Hub Crsler A Ivpjn Eg Nreb band speed 18 - 106 m/min capacity 90 degrees: round 250 mm capacity 90 degrees: flat 300 x 300 mm capacity 90 degrees: square 300 x 300 mm capacity 45 degrees: round R 220 mm capacity 45 degrees: flat R 220 x 300 mm capacity 45 degrees: square R 220 x 220 mm capacity 45 degrees: round L 220 mm capacity 45 degrees: flat L 240 x 300 mm capacity 45 degrees: square L 240 x 240 mm capacity 60 degrees: round R 120 mm capacity 60 degrees: flat R 120 x 300 mm capacity 60 degrees: square R 120 x 120 mm capacity 60 degrees: round L 140 mm capacity 60 degrees: flat L 240 x 300 mm capacity 60 degrees: square L 140 x 140 mm coolant capacity 60 l total power requirement 4 kW weight of the machine ca. 2,2 t dimensions of the machine ca. 4,2 x 2,2 x 2,3 m

Condition: excellent (used), Functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 41 mm, We thank you for your inquiry for a KASTO band saw SSB 260 A 2 CC Fully hydraulic high-performance band saw in the heaviest design, with horizontally parallel movable saw blade, for cutting profiles, pipes and solid material in all qualities, including extremely difficult to machine material (e.g. titanium, Inconel, Hastelloy) suitable for the use of bi-metal and hard metal saw blades. Saw unit in a fully solid design made of polymer concrete, this ensures the highest level of smoothness and service life of the saw blades. The saw unit is guided via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned hard metal saw blade guides. The material is tensioned using two hydraulic clamps. The control system allows for easy machine operation. The length can be entered on the handwheel with a resolution of 0.1 mm. The quantity setting is carried out via a control which switches off the machine when the quantity is reached. The material is fed via a feed cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. SSB A 2 CC 260 mm x 260 mm Ø 260 mm) Technical data: KASTO band saws Automatic band saws Machine type SSB 260 VA Technical data 2 column-guided Year of manufacture 2006 Cutting range 260x260 mm Drive power of saw gear. 4 KW Crjlnjvzlf Ns Eg Nrsb Drive power of auxiliary units 6.5 KW Cutting speed 15-125 m/min Saw feed hydraulic infinitely variable Saw band dimensions 4115x41x1.1 mm Feed length 600 mm Max. with multiple feed 9999 mm Material support. 850 mm Dimensions of the machine Length/width 1690x1900 mm Height 2030 mm Weight of the machine 2100 kg Accessories Chip conveyor, coolant device CNC control Flushing device Side guide rollers Prepared for Bundle clamping device Standstill monitoring Coolant monitoring Feed roller conveyor 3,500 mm long, with 11 transport rollers, driven by handwheel, 70 mm Ø, 260 mm usable roller width, roller axis distance 5 x 238.1 mm and 5 x 428.6 mm, 6 side guide rollers 260 mm high, load capacity 2,000 kg/m Delivery time: by arrangement Delivery service: ex works Payment: upon collection The machines have been checked for functionality and repaired. Errors in the information and subject to prior sale reserved. Thank you for your inquiry. If you have any further questions, we will be happy to help you. If you need a different cutting area, please let us know as we have other machines in stock. We retain title until all of our claims have been paid in full. Kind regards Michael Maurath

Condition: new, Year of construction: 2024, Functionality: fully functional, High performance bandsaw fully automatic in modern, closed construction for 90 ° cuts. Cutting area Ø 260 mm or 300 x 260 mm Working height 790 mm Saw blade dimensions 4115x34x1,1 mm included: - CNC control with 100 program touch screen Celnsd S Tmhj Eg Nrorb - Frequency-controlled saw drive - Clamping pressure reduction - Chip conveyor - Work light - 0-cut automatic

Condition: used, Year of construction: 1994, machine/vehicle number: 0894138, Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydr. Horizontal band saw machine, semi-automatic, band saw machine, horizontal band saw machine -Manufacturer: Behringer, horizontal band saw automatic band saw type HBP 430/854G/R30 -Equipment: 2x cross transport chain conveyors, driven roller conveyor, stop system, Cjlnepmdape Eg Nrorb -Saw drive: Dietz 7.5 kW -Cutting capacity flat: 90° 880 x 500 mm / 45° mm -Cutting capacity round: 90° 500 mm / 45° mm -Saw band speed: infinitely adjustable -Band saw: 7200 x 40 mm -Coolant device: cooling water -Setting dimensions: 26500 mm/6000/H2100 mm -Transport dimension: 26 loading meters -Weight: 16000kg

Condition: reconditioned (used), Year of construction: 1991, Functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 20,000 mm, total length: 20,000 mm, total width: 20,000 mm, power: 0.004 kW (0.01 HP), Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel moving band saw blade, for cutting profiles, pipes and solid material solid material in all qualities, including materials that are extremely difficult to cut (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit made of solid polymer concrete, This ensures maximum running smoothness and service life of the saw bands. The saw unit is guided by a vertical and a round column guide. (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw band guides. The material is clamped using two hydraulic clamping vices. The condition of the machine offers simple machine operation. The length can be set on the handwheel with a resolution of 0.1 mm. The number of pieces is set via a piece counter and the machine is switched off when the number of pieces is reached. The material is fed via a feed cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA 260 mm x 260 mm Ø 260 mm) Technical data: Bandsaws KASTO Automatic band saws Machine type SSB 260 VA Technical data 2 column guided Year of construction 1991 Cutting area 260x260 mm Drive power saw gear. 4 KW Drive power auxiliary units 6.5 KW Cutting speed 15-125 m/min Saw feed hydraulics infinitely variable Saw blade dimensions 4115x41x1.1 mm Feed length 600 mm Max. with multiple feed 5400 mm Material support 850 mm Machine dimensions Length/width 1690x1900 mm Height 2030 mm Weight of the machine 2100 kg Crjlnjrnkruj Eg Nrjb Accessories Chip conveyor Coolant device Multiple feed Side guide rollers Machine roller conveyor Adjustable side guide rollers Prepared for bundle tensioning device Multiple feed counter Hydraulic hold-down device