Used Horizontal band saws - automatic - cutting range 0-299mm for sale (98)

Condition: used, Year of construction: 2005, cutting diameter 270 mm saw band length 2925 x 27 x 0.9 mm capacity 90 degrees: flat 350 x 240 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 230 x 150 mm capacity 60 degrees: round 140 mm capacity 60 degrees: flat 140 x 140 mm table height 740 mm cutting speed 36 + 72 m/min clamping range max. 355 mm total power requirement 2.0 kW weight 1180 kg range L-W-H 2150 x 2400 x 1900 mm Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG) Cgehx Deuxz S Rsnaijt

Condition: new, Year of construction: 2025, cutting capacity: 280 mm, warranty duration: 12 months, - Swarf Brush - Speed Controller / Inverter - Hydraulic Vice - Hydro-Mechanic Blade Tension - Blade Breakage Detection - Stop System / Blade Breakage Switch - Stop System - 1 Piece 120 cm + 1 Piece 60 cm Roller Stand / 1 Pc. of 120 Cm + 1Pc. of 60 cm Roller Table - Chip Conveyor - Audio Warning System - Encoderli Sliding System / Metarial Feeding system With Encoder - 8 Programlı Automatic Sliding / Automatic Feeding and Cutting System With 8 Programs - Lighting System / Led Lighting TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS KME 280 Capacity 90° (mm) Capacity 90° (mm) Round Round ⌀ 280 Capacity 90° (mm) Capacity 90° (mm) Square Square 270 X 270 Capacity 90° (mm) Capacity 90° (mm) Rectangle Rectangle 210 X 340 Main Motor / Torque Main motor / Torque 1.5 kW /300 Nm Motor Hydraulic Motor Motor Hydraulic Motor 0.18 kW Coolant Motor Coolant Motor 0.12 kW Drive Motor Feeding Motor 0.37 kW Conveyor Motor Coolant Motor 0.18 kW Band Saw Blade Size 3660 X 27 X 0.9 mm Material Feeding Height Feeding Height 765 mm Vice Maximum Opening Vice Maximum Opening 355 mm Vice Maximum Closing Vice Maximum Closing Zero Zero Vice Height Vice Height 170 mm Table Width Rolled Table Width 370 mm Height-Width-Length Height-Width-Length 1300 X 1250 X 2200 mm Weight Weight 750 kg Cshxovvcq Se Dnaiogt

Condition: used, Year of construction: 2012, cutting capacity - round 290 mm cutting capacity - square 310 x 270 mm dimensions of saw-band 3100 x 27 x 0,9 mm saw band speed 20 - 100 m/min workpiece length - max. 3200 mm Number of working hours ca. 1500 h dimensions ca. 1650 x 2300 x 1535 mm Cgshx Dnajup H Hysiet weight of the machine ca. 865 kg

Condition: good (used), gearing type: mechanical, Do you have gearbox damage on your Behringer or Kasto saw .....? Cohxotv Eyvo Dnaijgt We can repair or refurbish your gearbox, no problem. In some cases we can also supply you with replacement gearboxes from stock

Condition: new, Year of construction: 2023, cutting diameter 280 mm saw band length 3660 mm cutting width 0,9 mm capacity 90 degrees: square 260 x 260 mm capacity 90 degrees: flat 210 x 340 mm feed length 500/2000 mm total power requirement 3 kW weight of the machine ca. 0,65 t Cjhx Dnaot Sym Soijgt dimensions of the machine ca. 1300 x 1270 x 1900 m Fully automatic horizontal band saw Cutting range: ROUND MATERIAL : 280MM SQUARE : 270X270MM RECTANGULAR : 210X340MM ABMESSUNGEN DES BANDES : 27X0.9X2660

Year of construction: 1988, Condition: good (used), machine/vehicle number: 388236, Part number MA1160 Manufacturer Behringer Type HBP 220 A Year of manufacture 1988 Machine-No. 388236 Length [mm] 1500 Width [mm] 2400 Cjhslkdd Hjx Dnaijgt Height [mm] 800 Weight [kg] 1500 Connected load [mm] 380 Working range [mm] Round 220 Automatic feed YES Gear [rpm] 20-140 Saw blade diameter 3720 X 32 x 1,1mm Cutting area 350 X 220mm

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Dimensions approx.: Length: 1500 mm Width: 1700 mm Height: 1480 mm Work table height: 950 mm Weight and power approx.: Total weight: 860 kg Installed power: 2.5 kW Saw motor power: 1.5 kW Cutting angle 90 °: Round Ø 260 mm flat BxH: 300 x 260 mm square: 260 x 260 mm Cutting angle +/- 45 °: Round Ø: 200 mm flat BxH: 200x240 mm square: 200x200 mm Cutting angle +60 °: Round Ø: 165 mm Cgohsvpfmcsx Dnaijt flat BxH: 160 x 120 mm square: 150 x 150 mm Minimum section that can be cut: Ø10 mm Minimum length that can be cut: 6 mm

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Carif bandsaw automat Model 320 BSA Year : 2008 Capacity round : 275 mm. Capacity rekt. : 320 x 230 mm. Capacity square : 265 mm. Angle cutting : 45 og 60 degrees Cohovlx Apex Dnaisgt

Condition: excellent (used), The Maco BSS 360 AR fully automatic bandsaw features programmable angular rotation. This enables fully automatic cutting of pipes and profiles to the right length and miter angle. Cgehx Dnetvwxfsaiet To minimize vibration during sawing, the saw frame is made of cast iron. The Maco BSS 360 AR can be operated in both semi-automatic and fully automatic modes. The machine is equipped with a 5″ touch screen for operation. The machine can be programmed via this screen and diagnostic data can be read. In the control, 200 programs can be stored, with the option of entering length, off-cut length, number of pieces, angles and off-cut corners in each program. Mitre sawing is possible from 60° left to 45° right. Material clamp automatically moves according to the mitre angle to be cut. The feed clamp has a stroke of 860 mm. The program itself calculates the number of feed unit strokes required to reach the defined length.

Condition: new, Year of construction: 2024, Cutting range 90 round 260mm flat 300x260mm Cgoheh Tnd Aox Dnaiet smallest diameter 5mm NC-controlled, automatic material insertion with hydraulic material full stroke clamping Easy operation by NC-control with plain text display Material advance function without reclamping of the material for short sections Stable, linear guided feed gripper with servo positioning for highest accuracy Automatic adjustment of the belt guide to the material width incl. the accessories driven chip brush, synchronous to the belt speed separately installed control panel 7" CE panel, networkable, 1000 data sets storable, history memory for various functions and data, etc.

Condition: new, Year of construction: 2025, Space saving high-tec MEBApro 260 AP Standard equipment 2-column-linear guided saw frame Feed by adjustable frequency controlled lead screw drive with automatic pressure regulation for best cutting performance and saw blade life Steplessly variable saw blade speed with powerful, frequency regulated drive Central and easy to use control panel Adjustable saw frame height by sensor system Cohx Dobv Nk Ejnaisgt Combined precise saw blade carbide-roller guidance with saw blade brush Inclination of saw blade to vice bed approx. 2° Colour silver grey / blue grey (RAL 7001 / RAL 7031) 1 bandsaw blade 4/6 tpi Instruction manual and spare parts list on CD-ROM Additional standard equipment NC-controlled, automatic infeed with hydraulic material full-stroke clamping Simple operating by NC-control with clear text message display by SPS control Material infeed without re-clamping of material at short sections Stable, linear guided infeed gripper with servo positioning for highest accuracy Automatic adjustment of saw blade guidance to material width Driven saw blade cleaning brush

Condition: good (used), Year of construction: 1998, Automatic band saw, capacity Ø 260 mm, 90°-cut, cutting speed 17-110 m/min stepless, motor 2,3 kw 2-speed, chip conveyor, piece counter, hydraulic material clamping adjustable, coolant device, dimension 2260x2100x1700 mm, weight ca. 1300 kg Cgshx Dnsmxliwoaiet

Condition: new, Year of construction: 2023, saw band length: 3,920 mm, saw band width: 34 mm, Double column bandsaw fully automatic Everising H-260 HB Cutting range round: 0 - 260mm Cutting range square: 300 x 260mm Bundle tension: Width: 145 - 190mm Bundle tension height: 30 - 130mm Drive power: 3.7 kW Saw blade dimensions: 3920 x 34 x 1.1mm Weight: 1759 KG Machine dimensions: 2170 x 2100mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush Cehx Dnajq Ulxyoiogt - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: excellent (used), Frietsch SAW MACHINES Purchase and sale of KASTO sawing machines Dear Ladies and Gentlemen, we buy and sell, overhaul and recondition KASTO - sawing machines. For more than 38 years we have experience with KASTO - sawing machines and have specialized in the overhauling of the machines. The machines are overhauled by qualified personnel according to KASTO factory standards. Also we are looking for KASTO - sawing machines according to your wishes for machine overhaul. Good price - performance ratio through professional machine overhaul. Cshx Dnsggbw Ieaiegt Technical data KASTOtwin A 2 Dimension standard machine length 1 755mm width 2 475mm height 1 570mm Total weight approx. 1 700kg Total drive power 5,0kW Drive power saw motor frequency controlled 3,0kW Cutting range in mm approx: Cutting range Ø 260 mm Cutting range, flat ( W x H ) 260 x 260mm Smallest dimension round Ø 10mm square, H x W 10mm Material feed length single max. 750mm Multiple feed 9 999mm Shortest cutting length 6mm Smallest diameter to be sawn 10mm Minimum rest piece in single cut 15mm Shortest rest piece length in automatic mode 100mm Cutting speed, infinitely variable 20 - 100m/min Saw blade dimension 4530 x 34 x 1,1mm Material support height 700mm cutting feed: infinitely variable Material feed Ku

Condition: good (used), Year of construction: 2008, Functionality: fully functional, Used machine - Refurbished - Good condition - Fully automatic metal band saw for 90° cuts - Remaining piece length of 45 mm due to double clamping vice - NC control with digital display (99 programs with 99 sets each) - Electronic height adjustment - Cutting pressure regulation - Hydraulic control of the saw arm - Hydraulic feed; feed length single stroke 600 mm - Coolant pump with dual feed to the saw blade guides - Saw blade breakage control Technical data: - Cutting range 90° round: 250 mm - rectangular: 290 x 250 mm - square: 250 x 250 - Band speed: 40/80 m/min Cgohxsvdcwze Dnaijt - Saw blade dimensions: 2910 x 27 x 0.9 mm - Material support height: 770 mm - Dimension: 1980 x 1750 x 1470 mm

Condition: new, Year of construction: 2024, incl. hydraulic lifting of the saw frame with locking valve Microdosing system with and without laser light for cutting line indication Cehx Dned Tb N Aeaiogt Metal band saw machine for straight and miter cuts, infinitely variable from 30° - 45° - 90° - 45° - 30 ° according to scale center of rotation unchanged at every angle setting, therefore exact length measurement at 90° and in the miter range. Cutting speed: 35 u.75 m/min pole switchable Cutting range 30° left Ø 130 or 120x120 45° left Ø 200 resp. 180x180 90° Ø 260 resp. 300x260 45° right Ø 200 resp. 180x180 30° right Ø 130 resp. 120x120 alternatively in "HS" version with semi-automatic saw discharge: - hydraulic lifting of the saw frame - hydraulic material clamping/short stroke - rapid traverse lowering to material top edge as well as micro spraying device with and without laser light

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm Cohx Djd Iip Asnaiogt

Condition: excellent (used), saw band length: 6,300 mm, total height: 41 mm, Fully hydraulic high-performance band saw in heavy-duty design, with horizontally parallel moving band saw blade, for cutting profiles, pipes and solid material solid material in all qualities, including materials that are extremely difficult to cut Cohx Dst Tvqisnaiogt (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit made of solid polymer concrete, This ensures maximum running smoothness and service life of the saw bands. Guidance of the saw unit via two vertical square columns (double column guide) with hardened and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw band guides. The material is clamped using two hydraulic clamping vices. The control system offers simple machine operation. The length can be set via a counter with 0.1 mm resolution. The number of pieces is set via a piece counter, which switches the machine off when the number of pieces is reached. The material is fed via a hydraulic cylinder and ensures maximum cutting accuracy. The machines are easy to operate and work fully automatically. KASTO - fully hydraulic horizontal bandsawing machine HBA 420 AU CNC ( 420 mm x420 mm /Ø 420 mm) Fully hydraulic high-performance bandsawing machine in heavy-duty design, with horizontal parallel moving band saw blade, for cutting profiles, tubes and solid material in all qualities, including grades, including extremely difficult-to-cut materials (e.g. titanium, Inconel, Hastelloy) Suitable for the use of bi-metal and carbide saw bands. Saw unit in solid design made of polymer concrete, thus ensuring maximum running smooth running and long service life of the saw bands. The saw unit is guided by two vertical square columns (double column guide) with hardened and ground guide rails. and ground guide rails. Hydraulic saw blade tensioning and hydraulically pre-tensioned carbide saw blade guides. Material clamping via two horizontal frame vices. Material feed via a non-driven roller conveyor integrated in the machine with twelve transport rollers. transport rollers integrated in the machine, making it easy to transport short offcuts. Cutting range round 420 mm Cutting area square 420x420 mm Material feed with automatic 600 mm Multiple material feed 9999 mm Cutting speed infinitely variable 20-130 m/min Total drive power 8 kW Drive power of saw motor 5.5 kW Clamping pressure reduction infinitely adjustable Material support height 700 mm Saw blade dimensions 6300x41x1.3 mm Shortest cut-off length in automatic mode 6 mm Remaining piece length in automatic mode 100 mm Voltage 400V/50 Hz Dimensions LxWxH 3050x2420x2130 mm Weight 2920 kg Year of construction 1989 Accessories: chip conveyor, coolant device

Condition: new, Year of construction: 2023, saw band length: 4,420 mm, saw band width: 34 mm, Double-column bandsaw, fully automatic Everising H-360 HB Cutting range round: 0 - 360mm Cutting range square: 360 x 360mm Bundle tension: Width: 180 - 280mm Bundle tension height: 50 - 160mm Drive power: 3.7 kW Saw blade dimensions: 4420 x 34 x 1.1mm Weight: 2310 KG Machine dimension 2500 x 2200mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw blade tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off - Multi-job function - Bundle clamping device - Driven chip brush - Automatic band breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Cohx Dnoq St U Noaiegt Extensive complete German documentation.

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Cshx Dnofww Sqsaisgt Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with Cgjhx Djfg E Hysnaiot semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Cjhx Dnaed Iipzjiogt Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Condition: good (used), Year of construction: 2007, operating hours: 3,048 h, Kastotwin A2 sawing machine, automatic Power on time: 8234 Cutting time: 3048 max cutting diamater (90°): 260 mm max cutting square (90°): 260x260mm cutting speed, adjustable continously: 20-110 m/min cutting feed, adjustable continously material clamping, hydarulic, adjustable: 20-60 bar saw blade dimensions: 4530x34x1,1 mm dimensions: 1755x2475x1570mm weight: 1700 kg Accessories/options: with swarf conveyor Cohxsvx Sv Ns Dnaiogt coolant tank documentations with saw blades rolling stands for long materials, 3 meters Under power in our warehouse!